Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

This part of IEC 60079 specifies the requirements for the design, construction, testing and marking of electrical apparatus with type of protection increased safety "e" intended for use in explosive gas atmospheres. This standard applies to electrical apparatus where the rated voltage does not exceed 11 kV r.m.s. a.c. or d.c. Additional measures are applied to ensure that the apparatus does not produce arcs, sparks, or excessive temperatures in normal operation or under specified abnormal conditions.

Atmosphères explosives - Partie 7: Protection de l'équipement par sécurité augmentée <<e>>

La présente partie de la CEI 60079 décrit les exigences spécifiques de conception, de construction, d'essais et de marquage du matériel électrique avec mode de protection de sécurité augmentée "e" destiné à être utilisé dans les atmosphères explosives gazeuses. La présente norme s'applique au matériel électrique ayant une tension assignée ne dépassant pas 11 kV en courant alternatif (valeur efficace) ou en courant continu. Des mesures supplémentaires sont appliquées pour que le matériel ne produise ni arc, ni étincelle, ni température excessive en fonctionnement normal ou dans des conditions anormales spécifiées.

General Information

Status
Published
Publication Date
09-Jul-2006
Current Stage
DELPUB - Deleted Publication
Completion Date
26-Jun-2015
Ref Project

Relations

Buy Standard

Standard
IEC 60079-7:2006 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e" Released:7/10/2006 Isbn:2831887267
English and French language
159 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60079-7
Edition 4.0 2006-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Explosive atmospheres –
Part 7: Equipment protection by increased safety "e"

Atmosphères explosives –
Partie 7: Protection de l'équipement par sécurité augmentée «e»

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60079-7
Edition 4.0 2006-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Explosive atmospheres –
Part 7: Equipment protection by increased safety "e"

Atmosphères explosives –
Partie 7: Protection de l'équipement par sécurité augmentée «e»

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XC
CODE PRIX
ICS 29.260.20 ISBN 2-8318-8726-7

– 2 – 60079-7 © IEC:2006
CONTENTS
FOREWORD.5

1 Scope.7
2 Normative references .7
3 Terms and definitions .9
4 Constructional requirements for all electrical apparatus.12
4.1 General .12
4.2 Electrical connections.12
4.3 Clearances.15
4.4 Creepage distances.20
4.5 Solid electrical insulating materials.21
4.6 Windings .21
4.7 Temperature limitations .22
4.8 Wiring internal to apparatus.24
4.9 Degrees of protection provided by enclosures .24
4.10 Fasteners .24
5 Supplementary requirements for specific electrical apparatus.25
5.1 General .25
5.2 Rotating electrical machines.25
5.3 Luminaires .30
5.4 Caplights and handlights .34
5.5 Measuring instruments and instrument transformers.35
5.6 Transformers other than instrument transformers .35
5.7 Batteries.36
5.8 General purpose connection and junction boxes.42
5.9 Resistance heaters (other than trace heaters) .42
5.10 Other electrical apparatus .44
6 Type verifications and type tests .44
6.1 Dielectric strength .44
6.2 Rotating electrical machines.45
6.3 Luminaires designed for mains supply.47
6.4 Measuring instruments and instrument transformers.49
6.5 Transformers other than instrument transformers .50
6.6 Secondary batteries .50
6.7 General purpose connection and junction boxes.53
6.8 Resistance heating devices and resistance heating units .53
6.9 Terminal insulating material tests .54
7 Routine verifications and routine tests .55
7.1 Dielectric tests .55
7.2 Dielectric tests for batteries.55
7.3 Inter-turn overvoltage tests.56
8 Ex component certificates.56
8.1 General .56
8.2 Terminals .56

60079-7 © IEC:2006 – 3 –
9 Marking and instructions.56
9.1 General marking.56
9.2 Instructions for use.57
9.3 Warning markings .59

Annex A (normative) Cage motors − Methods of test and of calculation .60
Annex B (normative) Type tests for specific forms of resistance heating devices or
resistance heating units (other than trace heater) .62
Annex C (informative) Cage motors – Thermal protection in service.64
Annex D (informative) Resistance heating devices and units – Additional electrical
protection .65
Annex E (informative) Combinations of terminals and conductors for general purpose
connection and junction boxes .66
Annex F (informative) Dimensions of copper conductors .68
Annex G (informative) Potential stator winding discharge risk assessment – Ignition
risk factors.69
Annex H (normative) Test procedure for T8, T10 and T12 lamps.70
Annex I (Informative) Introduction of an alternative risk assessment method
encompassing ‘Equipment Protection Levels’ for Ex Equipment. .75

Bibliography.80

Figure 1 – Determination of creepage distances and clearances.20
Figure 2 – Minimum values of the time t of motors in relation to the starting current
E
ratio I /I .28
A N
Figure 3 – Arrangement for the luminaire vibration test .49
Figure A.1 – Diagram illustrating the determination of time t .61
E
Figure E.1 – Example of defined terminal/conductor arrangement table .67
Figure H.1 – Asymmetric pulse test circuit .71
Figure H.2 – Asymmetric power detection circuit.73
Figure H.3 – Flow Chart – Asymmetric power Test.74

Table 1 – Creepage distances and clearances .16
Table 2 – Tracking resistance of insulating materials .20
Table 3 – Limiting temperatures for insulated windings .23
Table 4 – Potential air gap sparking risk assessment for cage rotor ignition risk factors.27
Table 5 – Minimum distance between lamp and protective cover .31
Table 6 – Creepage distances and clearances for screw lamp caps .31
Table 7 − Resistance to the effect of short-circuit currents.35
Table 8 – Explosion test mixtures .46
Table 9 – Insertion torque and minimum removal torque .47
Table 10 – Value for pull-out tests .55
Table 11 – Creepage distances and clearances for screw lamp caps .58
Table 12 − Tex
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.