IEC 61935-2-24:2015

Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-24: Cord and work area cord category 7_A - Blank detail specification

IEC 61935-2-24:2015, which is a blank detail specification, describes cords and work area cords category 7A, as defined in ISO/IEC 11801 series. According to the above cabling specifications these cords are Category 7A compliant for which the requirements are given in ISO/IEC 11801 series. The blank detail specification determines the layout and style for detail specifications describing cords with transmission characteristics up to 1 000 MHz for digital communications. Detail specifications, based on the blank detail specification, may be prepared by a national organization, a manufacturer, or a user. Test configuration applicable to cords is detailed in IEC 61935-2.
This publication is to be read in conjunction with IEC 61935-2:2010, IEC 61156-1:2007, IEC 61156-6:2010 and IEC 60603-7-71:2010

Systèmes de câblage générique - Spécification relative aux essais de câblages de télécommunications symétriques selon l'ISO/IEC 11801 - Partie 2-24: Cordons et cordons de zone de travail de catégorie 7_A - Spécification particulière cadre

L'IEC 61935-2-24:2015, qui est une spécification particulière cadre, décrit des cordons et des cordons de zone de travail de catégorie 7A, définie dans la série ISO/IEC 11801. Conformément aux spécifications de câblage ci-dessus, ces cordons sont conformes à la catégorie 7A dont les exigences sont données dans la série ISO/IEC 11801. La spécification particulière cadre détermine la disposition et le modèle pour l'établissement de spécifications particulières décrivant les cordons dont les caractéristiques de transmission sont inférieures ou égales à 1 000 MHz, pour communications numériques. Les spécifications particulières, fondées sur la spécification particulière cadre, peuvent être élaborées par un organisme national, un fabricant ou un utilisateur. La configuration d'essai applicable aux cordons est détaillée dans l'IEC 61935-2.
Cette publication doit être lue conjointement avec la IEC 61935-2:2010, IEC 61156-1:2007, IEC 61156-6:2010 et IEC 60603-7-71:2010

General Information

• Status: Published
• Publication Date: 23-Jul-2015
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: TC 46 - Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories
• Drafting Committee: WG 9 - TC 46/WG 9
• Current Stage: PPUB - Publication issued
• Start Date: 15-Aug-2015
• Completion Date: 24-Jul-2015

Standards Content (Sample)

IEC 61935-2-24 ®
Edition 1.0 2015-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Generic cabling systems – Specification for the testing of balanced
communication cabling in accordance with ISO/IEC 11801 –
Part 2-24: Cord and work area cord category 7 – Blank detail specification
A
Systèmes de câblage générique – Spécification relative aux essais de câblages
de télécommunications symétriques selon l’ISO/IEC 11801 –
Partie 2-24: Cordons et cordons de zone de travail de catégorie 7 –
A
Spécification particulière cadre

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
15 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC Plus de 60 000 entrées terminologiques électrotechniques, en
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 61935-2-24 ®
Edition 1.0 2015-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Generic cabling systems – Specification for the testing of balanced

communication cabling in accordance with ISO/IEC 11801 –

Part 2-24: Cord and work area cord category 7 – Blank detail specification

A
Systèmes de câblage générique – Spécification relative aux essais de câblages

de télécommunications symétriques selon l’ISO/IEC 11801 –

Partie 2-24: Cordons et cordons de zone de travail de catégorie 7 –
A
Spécification particulière cadre

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.10 ISBN 978-2-8322-2817-3

– 2 – IEC 61935-2-24:2015 © IEC 2015
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references. 5
3 Guidance for preparation of detail specifications. 6
4 Blank detail specification for cords and work area cords category 7 . 8
A
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
GENERIC CABLING SYSTEMS –
SPECIFICATION FOR THE TESTING OF BALANCED
COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 –

Part 2-24: Cord and work area cord category 7 –
A
Blank detail specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61935-2-24 has been prepared by IEC technical committee 46:
Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and
accessories.
The text of this standard is based on the following documents:
FDIS Report on voting
46/555/FDIS 46/561/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

– 4 – IEC 61935-2-24:2015 © IEC 2015
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 61935 series, published under the general title Generic cabling
systems – Specification for the testing of balanced communication cabling in accordance with
ISO/IEC 11801, can be found on the IEC website.
Future standards in this series will carry the new general title as cited above. Titles of existing
standards in this series will be updated at the time of the next edition.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
GENERIC CABLING SYSTEMS –
SPECIFICATION FOR THE TESTING OF BALANCED
COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 –

Part 2-24: Cord and work area cord category 7 –
A
Blank detail specification
1 Scope
This part of IEC 61935, which is a blank detail specification, describes cords and work area
cords category 7 , as defined in ISO/IEC 11801 series.
A
According to the above cabling specifications these cords are Category 7 compliant for
A
which the requirements are given in ISO /IEC 11801 series.
This specification should be used in conjunction with IEC 61935-2, IEC 61156-1, IEC 61156-6
and IEC 60603-7-71. The blank detail specification determines the layout and style for detail
specifications describing cords with transmission characteristics up to 1 000 MHz for digital
communications. Detail specifications, based on the blank detail specification, may be
prepared by a national organization, a manufacturer, or a user.
Test configuration applicable to cords is detailed in IEC 61935-2.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60603-7-71, Connectors for electronic equipment – Part 7-71: Detail specification for 8-
way, shielded, free and fixed connectors, for data transmissions with frequencies up to
1 000 MHz
IEC 60794-1-22, Optical fibre cables – Part 1-22: Generic specification – Basic optical cable
test procedures – Environmental tests method
...