IEC 61190-1-3:2007/AMD1:2010

Amendment 1 - Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications

Amendement 1 - Matériaux de fixation pour les assemblages électroniques - Partie 1-3: Exigences relatives aux alliages à braser de catégorie électronique et brasures solides fluxées et non fluxées pour les applications de brasage électronique

General Information

• Status: Published
• Publication Date: 09-Jun-2010
• ICS: 31.190 - Electronic component assemblies
• Technical Committee: TC 91 - Electronics assembly technology
• Drafting Committee: WG 2 - TC 91/WG 2
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 13-Dec-2017

Relations

• Amends: IEC 61190-1-3:2007 - Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
• Effective Date: 05-Sep-2023
• Revised: IEC 61190-1-3:2017 - Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61190-1-3 ®
Edition 2.0 2010-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Attachment materials for electronic assembly –
Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-
fluxed solid solders for electronic soldering applications

Matériaux de fixation pour les assemblages électroniques –
Partie 1-3: Exigences relatives aux alliages à braser de catégorie électronique et
brasures solides fluxées et non fluxées pour les applications de brasage
électronique
IEC 61190-1-3:2007/A1:2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by

any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or

IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.

Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette

publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 61190-1-3 ®
Edition 2.0 2010-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Attachment materials for electronic assembly –
Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-
fluxed solid solders for electronic soldering applications

Matériaux de fixation pour les assemblages électroniques –
Partie 1-3: Exigences relatives aux alliages à braser de catégorie électronique et
brasures solides fluxées et non fluxées pour les applications de brasage
électronique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
J
CODE PRIX
ICS 31.190 ISBN 978-2-88910-975-3
– 2 – 61190-1-3 Amend.1 © IEC:2010

FOREWORD
This amendment has been prepared by IEC technical committee 91: Electronics assembly

technology
The text of this amendment is based on the following documents:

FDIS Report on voting
91/920/FDIS 91/925/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
Delete in the foreword the totality of the existing patent statements.
Add the following new page INTRODUCTION with the following text
INTRODUCTION
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. IEC shall not be held responsible for identifying any or all such patent
rights.
The International Electrotechnical Commission (IEC) draws attention to the fact that it is
claimed that compliance with this document may involve the use of a patent concerning in
particular alloys compositions.

IEC takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he/she is willing to negotiate licences
under reasonable and non-discriminatory terms and conditions with applicants throughout the
world. In this respect, the statement of the holder of this patent right is registered with IEC.
Information may be obtained from:
US PAT No. 4879096
Cookson Electronics Assembly Materials
600 Route 440 Jersey City,New Jersey 07304

US PAT No. 5527628
Iowa State University Research Foundation, Inc.
310 Lab of Mechanics
Ames, Iowa 50011-2131, U.S.A.
JP PAT No. 3040929
JP PAT No. 3027441
Matsushita Electric Industrial Co., Ltd.
Matsushita IMP Building 20F 1-3-7, Shiromi, Chouh-ku, Osaka, 540-6319, Japan

61190-1-3 Amend.1 © IEC:2010 – 3 –

JP PAT No. 2805595
Mitsui Mining & Smelting Co., Ltd.

Gate City Ohsaki-West Tower 19th Fl. 1-11-1 Osaki, Shinagawa-ku, Tokyo, 141-8584, Japan

JP PAT No. 3027441
Senju Metal Industry Co., Ltd.

Senju Hashido-cho 23, Adachi-ku, Tokyo, 120-8555, Japan

NOTE Patent rights vary between country of manufacture, sale, use and final destination; suppliers or users

remain responsible for establishing the exact legal position relevant to their own situation.

Attention is drawn to the possibility that some of the elements of this document may be the

subject of patent rights other than those identified above. IEC shall not be held responsible for

identifying any or all such patent rights.
2 Normative references
Remove the existing reference ISO 9453 and replace it by the following new reference:
ISO 9453:2006, Soft solders alloys – Chemical compositions and forms
4.1 Alloy composition
Add the following note at the end of this subclause:
N0TE The alloy short name can be used as identifier of solder alloy(s) in mounted boards used in electrical and
electronic equipment (see Annex C).
Table B.1 – Composition, and temperature characteristics of lead-free solder alloys
Replace the entire Table B.1 by the following new Table B.1:

– 4 – 61190-1-3 Amend.1 © IEC:2010

a, b
Table B.1 – Composition, and temperature characteristics of lead-free solder alloys

Other
Alloy Short Sn Cu Bi In Ag Sb Temperature

d
component
name name °C
elements
% % % % % %
Solidus Liquidus
c
Sn100 Sn100 99,9    232 mp

Sn97Ag3 A30 REM-97,0  3  221 224

Sn95A g5 A50 REM-95,0  5  221 240

ea
Sn96,5Ag3,5 A35 REM-96,5  3,5  221

Sn96,3Ag3,7 A37 REM-96,3  3,7  221 228
Sn99Cu,7Ag,3 C7A3 REM-99,0 0,7 – – 0,3±0,10 – – 217 227
Sn98.97Cu,7Ag,3Ni,03 C7A3Ni REM-98,97 0,7 – – 0,3±0,10 – Ni0.03±0.01 218 228
Sn98.3Cu,7Ag1 C7A10 REM-98,7 0,7 – – 1,0 – 217 224
Sn95Cu4Ag1 C40A10 REM-95,0 4,0±0,50– – 1,0 – – 217 353
Sn92Cu6Ag2 C60A20 REM-92,0 6,0 – – 2,0 – – 217 380

Sn96,5Ag3Cu,5 A30C5 REM-96,5 0,5 – – 3,0 – – 217 220

Sn95,8Ag3,5Cu,7 A35C7 REM-95,8 0,7 – – 3,5 – – 217 218

Sn95,5Ag3,8Cu,7 A38C7 REM-95,5 0,7  3,8  217 226

Sn95,5Ag4,0Cu,5 A40C5 REM–95,5 0,5 – – 4,0 – – 217 229

Sn96Ag2,5Bi1Cu,5 A25B10C5 REM-96,0 0,5 1,0 2,5  213 218
Sn42Bi58 B580 REM-42,0 – 58,0 – – – – 139 ea
ea
Sn99,3Cu,7 C7 REM-99,3 0,7 – – – – – 227
Sn97Cu3 C30 REM-97,0 3,0 – – – – – 227 310
Sn48In52 N520 REM-48,0 – – 52 – – – 118 ea

Sn88In8Ag3,5Bi,5 N80A35B5 REM-88,0 – 0,5 8,0 3,5 – – 196 206

Sn92In4Ag3,5Bi,5 N40A35B5REM-92,0 – 0,5 4,0 3,5 – – 210 216
Sn95Sb5 S50 REM-95,0   5,0±0,50 235 240
ea
Sn91Zn9 Z90 REM-91,0 – – – – – Zn9,0 199
Sn89Zn8Bi3 Z80B30 REM-89,0 – 3,0 – – – Zn8,0 190 197
a
Except where otherwise indicated, the component elements in each alloy should not vary from their tabulated percentage by more
than the following,
If ≤5 % of total alloy variation equals ±0,2 %,

If >5 % of total alloy variation equals ±0,5 %,
The letters "REM" appearing with a NUMBER for an element of an alloy (e.g. REM-10,0) denotes that the element makes up the
REMAINDER of that alloy with its actual percentage calculated as a difference from 100 %, the NUMBER indicates the
approximate percentage of that element in the alloy.
b
The solidus and liquidus temperature values are provided for information only and are not intended to be a requirement in the
formulation of the alloys. In the “Liquidus” column, “ea” indicates eutectic alloys and “mp” indicates the tabulated solidus
temperature representing the melting point for the elements (Sn100). Although efforts have been made to document the correct
solidus and liquidus temperatures for each alloy, users of this standard are advised to verify these temperature values before use.
c
Alloy Sn100 is included in this document for use in replenishing tin in wave soldering baths and is not suitable for use as a stand-
alone solder because of potential tin pest problems. Do not use alloy Sn100 as a stand-alone solder on hardware being fabricated
for a government unless it is specifically identified for such use in a government-approved end item drawing, specification, or
waiver.
d
Short name definitions for lead-free alloys.
___________
For footnotes to Table B.1, see the following page

61190-1-3 Amend.1 © IEC:2010 – 5 –

Other
Alloy Short Sn Cu Bi In Ag Sb Temperature

d
component
name name °C
elements
% % % % % % Solidus Liquidus
For labelling purposes, in cases of limited space, a short name code is available for use according to the guidelines below:

The key alloying elements are identified using one letter as follows:

A silver
B bismuth
C copper
N indium
S antimony
Z zinc
Ni nickel
The short name does not indicate the base element (i.e. tin) in lead-free alloys as this is assumed.
Digits are used to indicate percentage of key elements as follows:
x = 0,x % (for example 5 corresponds to 0,5 % by weight)
xx = x,x % (for example 55 corresponds to 5,5 % by weight)
xxx = xx,x %        (for example 505 corresponds to 50,5 % by weight)
No digits for <0,1%    (for example Ni corresponds to Ni0.0X % by weight)

For example, Sn98.97Cu,7Ag,3Ni0.03 has short name C7A3Ni.

– 6 – 61190-1-3 Amend.1 © IEC:2010

Replace the text of Table B.4 by the following new Table B.4:

Table B.4 – Cross reference from solidus and liquidus temperatures
a
to alloy names by temperature
Temperature
Alloy
°C
name
Solidus Liquidus
96 ea Sn16Pb32Bi52
100 ea Sn34Pb20Bi46
118 ea In52Sn48
120 167 Sn46Pb46Bi08
134 181 In26Sn38Pb37
138 ea Sn42Bi58
140 160 Sn30Cd70
144 163 Sn43Pb43Bi14
145 ea Sn50Pb32Cd18
149 150 In80Pb15Ag05
153 163 In12Sn70Pb18
156 mp In100
160 174 In70Pb30
174 185 In60Pb40
178 270 Sn18Pb80Ag02
179 ea Sn62Pb36Ag02Sb4
179 ea Sn62Pb36Ag02
180 185 Sn60Pb38Bi02
180 209 In50Pb50
183 ea Sn63Pb37
183 ea Sn63Pb37Sb4
183 190 Sn60Pb38Cu02
183 191 Sn60Pb40
183 191 Sn60Pb40Sb4
183 193 Sn70Pb30
183 193 Sn70Pb30Sb4
136 152 In20Sn54Pb26
183 213 Sn90Pb10
183 215 Sn50Pb49Cu01
183 216 Sn50Pb50
183 216 Sn50Pb50Sb4
183 226 Sn45Pb55
183 238 Sn40Pb60
183 238 Sn40Pb60Sb4
183 246 Sn35Pb65
183 246 Sn35Pb65Sb4
183 254 Sn30Pb70
183 254 Sn30Pb70Sb4
183 277 Sn20Pb80
183 277 Sn20Pb80Sb4
184 270 Sn20Pb79Sb01
185 231 Sn40Pb58Sb02
185 243 Sn35Pb63Sb0
...