IEC 60136-2B:1973
(Main)Supplement B - Dimensions of brushes and brush-holders for electrical machinery - Part 2: Complementary dimensions of brushes - Terminations of brushes
Supplement B - Dimensions of brushes and brush-holders for electrical machinery - Part 2: Complementary dimensions of brushes - Terminations of brushes
Complément B - Dimensions des balais et porte-balais pour machines électriques - Partie 2: Dimensions complémentaires des balais - Connexions des balais
General Information
Buy Standard
This May Also Interest You
IEC 60136:2024 applies primarily to brushes and brush-holders for cylindrical commutators and slip rings for electrical rotating machines. Some clauses of this document may cover other configurations, such as flat commutators or plain disks. It defines the dimensions of brushes and their components, together with their tolerances:
- dimensions of brush block (t, a, r),
- angles α and β,
- chamfer,
- flexibles (shunts),
- standard terminals.
It also covers the conventional designation of principal dimensions, the marking of brushes and the testing methods for the qualification of brushes after their manufacturing (except the brush grade material, covered by IEC 60413). This third edition cancels and replaces the second edition published in 1986 and Amendment 1:1995. This edition constitutes a technical revision.
Please refer to the Foreword of the document for a comprehensive listing of the changes with respect to the previous edition.
- Standard167 pagesEnglish and French languagesale 15% off
IEC 60034-30-3:2024 specifies efficiency classes for fixed-speed three-phase high-voltage cage induction motors in accordance with IEC 60034-1 that
- have a rated voltage exceeding 1 000 V, but not exceeding 11 kV;
- have a rated power from 200 kW to 2 000 kW;
This document provides the global harmonization of energy-efficiency classes of three-phase cage induction motors with rated voltage above 1 000 V that are rated for direct online starting and fixed-speed operation at a 50 Hz or 60 Hz supply with sinusoidal voltage.
- Standard45 pagesEnglish and French languagesale 15% off
IEC 60773:2021 applies to test methods for the measurement of the operational characteristics of brushes designed to operate on commutating and slip ring machines under specified test conditions. By extension some tests may be relevant for other kinds of sliding electrical contacts for electrical appliances.
This second edition cancels and replaces the first edition published in 1983. This edition includes the following significant technical changes with respect to the previous edition:
- the clause structure has been modified on the view point of a laboratory testing procedure. The new sequence is as follows: test rig specification, general testing procedure, and specific procedure for each operational characteristic
- a new clause has been added to introduce the black-band test for the characterisation of the brush grades for DC machines.
- Standard155 pagesEnglish and French languagesale 15% off
IEC 60136:2024 applies primarily to brushes and brush-holders for cylindrical commutators and slip rings for electrical rotating machines. Some clauses of this document may cover other configurations, such as flat commutators or plain disks. It defines the dimensions of brushes and their components, together with their tolerances:
- dimensions of brush block (t, a, r),
- angles α and β,
- chamfer,
- flexibles (shunts),
- standard terminals.
It also covers the conventional designation of principal dimensions, the marking of brushes and the testing methods for the qualification of brushes after their manufacturing (except the brush grade material, covered by IEC 60413). This third edition cancels and replaces the second edition published in 1986 and Amendment 1:1995. This edition constitutes a technical revision.
Please refer to the Foreword of the document for a comprehensive listing of the changes with respect to the previous edition.
- Standard167 pagesEnglish and French languagesale 15% off
IEC 60034-30-3:2024 specifies efficiency classes for fixed-speed three-phase high-voltage cage induction motors in accordance with IEC 60034-1 that
- have a rated voltage exceeding 1 000 V, but not exceeding 11 kV;
- have a rated power from 200 kW to 2 000 kW;
This document provides the global harmonization of energy-efficiency classes of three-phase cage induction motors with rated voltage above 1 000 V that are rated for direct online starting and fixed-speed operation at a 50 Hz or 60 Hz supply with sinusoidal voltage.
- Standard45 pagesEnglish and French languagesale 15% off
IEC 60773:2021 applies to test methods for the measurement of the operational characteristics of brushes designed to operate on commutating and slip ring machines under specified test conditions. By extension some tests may be relevant for other kinds of sliding electrical contacts for electrical appliances.
This second edition cancels and replaces the first edition published in 1983. This edition includes the following significant technical changes with respect to the previous edition:
- the clause structure has been modified on the view point of a laboratory testing procedure. The new sequence is as follows: test rig specification, general testing procedure, and specific procedure for each operational characteristic
- a new clause has been added to introduce the black-band test for the characterisation of the brush grades for DC machines.
- Standard155 pagesEnglish and French languagesale 15% off
IEC 62496-4:2011 covers general information on the subject of Optical Circuit Board (OCB) interfaces. It includes normative references, definitions and rules for creating and interpreting the standard drawings.
- Standard60 pagesEnglish and French languagesale 15% off
IEC 61784-5-15:2010 specifies the installation profiles for CPF 15/1 (MODBUS -TCP) and CPF 15/2 (RTPS).The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2010. This bilingual version (2012-02) corresponds to the monolingual English version, published in 2010-07.
This publication is to be read in conjunction with IEC 61918:2010.
- Standard23 pagesEnglish languagesale 15% off
- Standard46 pagesEnglish and French languagesale 15% off
- Standard100 pagesEnglish and French languagesale 15% off
IEC 61784-5-14:2010 specifies the installation profiles for CPF 14 (EPA). The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2010. This bilingual version (2012-02) corresponds to the monolingual English version, published in 2010-07.
This publication is to be read in conjunction with IEC 61918:2010.
- Standard30 pagesEnglish languagesale 15% off
- Standard64 pagesEnglish and French languagesale 15% off
Ingrid Glavich Ingrid Glavich 2 2 1995-11-10T13:27:00Z 2008-11-17T14:51:00Z 2008-11-17T14:51:00Z 1 78 449 3 1 526 10.6845 Clean 21 0 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";}
ISO/IEC 29341-4-12:2008(E) enables the homeowner to browse the objects stored on the Media Server, select one and cause it to be played on a suitable rendering device. The series of ISO/IEC 29341 publications defines an architecture for pervasive peer-to-peer network connectivity of intelligent appliances, wireless devices and PCs. It is designed to bring easy to use, flexible, standards-based connectivity to ad-hoc or unmanaged networks whether in the home, in a small business, public spaces or attached to the Internet.
- Standard150 pagesEnglish languagesale 15% off
- 27-Nov-2008
- 01
- 29.160.10
- 35.200
- ISO/IEC JTC 1
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.