IEC 61215-1:2021/COR1:2021

Corrigendum 1 - Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements

General Information

• Status: Published
• Publication Date: 24-May-2021
• ICS: 27.160 - Solar energy engineering
• Technical Committee: TC 82 - Solar photovoltaic energy systems
• Drafting Committee: WG 2 - TC 82/WG 2
• Current Stage: PPUB - Publication issued
• Start Date: 09-Jul-2021
• Completion Date: 25-May-2021

Relations

• Corrects: IEC 61215-1:2021 - Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements
• Effective Date: 05-Sep-2023

Standards Content (Sample)

 IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
IEC 61215-1
Edition 2.0  2021-02
TERRESTRIAL PHOTOVOLTAIC (PV) MODULES –
DESIGN QUALIFICATION AND TYPE APPROVAL –

Part 1: Test requirements
CO RRI G E NDUM 1
This correction applies only to the English version.

Replace the existing Figure 2 by the following new Figure 2.
IEC 61215-1:2021-02/COR1:2021-05(en)

– 2 – IEC 61215-1:2021/COR1:2021
 IEC 2021
 IEC 2021
a
If the bypass diodes are not accessible in the standard modules, a special sample can be prepared for the
bypass diode thermal test (MQT 18.1). The bypass diode should be mounted physically as it would be in a
standard module, with lead wires attached, as required in MQT 18 of IEC 61215-2:2021. This sample does not
have to go through the other tests in the sequence.
b
...