IEC 61000-4-1:2006

Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series

The object of this part of IEC 61000 is to give applicability assistance to the technical committees of IEC or other bodies, users and manufacturers of electrical and electronic equipment on EMC standards within the IEC 61000-4 series on testing and measurement techniques and to provide general recommendations concerning the choice of relevant tests. This standard has the status of a basic EMC publication in accordance with IEC Guide 107.

Compatibilité électromagnétique (CEM) - Partie 4-1: Techniques d'essai et de mesure - Vue d'ensemble de la série CEI 61000-4

L'objet de cette partie de la CEI 61000 est de donner une aide aux comités techniques de la CEI ou autres organismes, aux utilisateurs et aux fabricants de matériels électroniques sur l'application des normes CEM de la série CEI 61000-4 sur les techniques de mesures et d'essais et de leur fournir des recommandations générales concernant le choix des essais pertinents. Cette norme a le statut de publication fondamentale en CEM conformément au Guide 107 de la CEI.

General Information

• Status: Replaced
• Publication Date: 24-Oct-2006
• ICS: 33.100.01 - Electromagnetic compatibility in general
• ICS: 33.100.20 - Immunity
• Technical Committee: TC 77 - Electromagnetic compatibility
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 27-Apr-2016

Relations

• Replaced By: IEC TR 61000-4-1:2016 - Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
• Effective Date: 05-Sep-2023
• Revises: IEC 61000-4-1:2000 - Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61000-4-1
Edition 3.0 2006-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
Electromagnetic compatibility (EMC) –
Part 4-1: Testing and measurement techniques – Overview of IEC 61000-4 series

Compatibilité électromagnétique (CEM) –
Partie 4-1: Techniques d’essai et de mesure – Vue d’ensemble de la série
CEI 61000-4
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 61000-4-1
Edition 3.0 2006-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
Electromagnetic compatibility (EMC) –
Part 4-1: Testing and measurement techniques – Overview of IEC 61000-4 series

Compatibilité électromagnétique (CEM) –
Partie 4-1: Techniques d’essai et de mesure – Vue d’ensemble de la série
CEI 61000-4
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
P
CODE PRIX
ICS 33.100.01; 33.100.20 ISBN 2-8318-8815-8

61000-4-1 © IEC:2006 – 3 – – 2 – 61000-4-1 © IEC:2006
CONTENTS
FOREWORD.3
INTRODUCTION.5

1 Scope and object . 6
2 Normative references. 6
3 Terms and definitions . 8
4 General . 9
5 Structure of the IEC 61000-4 series standards . 9
6 Selection of tests . 9
7 Test report.13

Table 1 – Applicability of immunity tests based on location (environment) .14
Table 2 – Applicability of immunity tests based on EUT ports.16

61000-4-1 © IEC:200661000-4-1 © IEC:2006 – 5 – – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
ELECTROMAGNETIC COMPATIBILITY (EMC) –

Part 4-1: Testing and measurement techniques –
Overview of IEC 61000-4 series

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61000-4-1 has been prepared by IEC technical committee 77:
Electromagnetic compatibility.
This standard forms Part 4-1 of IEC 61000. It has the status of a basic EMC publication in
accordance with IEC Guide 107.
This third edition cancels and replaces the second edition, published in 2000. It constitutes a
technical revision. Changes introduced in this third edition are for the purpose of updating the
text to include reference to the latest publications of the IEC 61000-4 series.

61000-4-1 © IEC:2006 – 7 – – 4 – 61000-4-1 © IEC:2006
The text of this standard is based on the following documents:
FDIS Report on voting
77/319/FDIS 77/324/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
61000-4-1 © IEC:200661000-4-1 © IEC:2006 – 9 – – 5 –
INTRODUCTION
The IEC 61000 series is published in several parts according to the following structure:
Part 1: General
General consideration (introduction, fundamental principles)
Definitions, terminology
Part 2: Environment
Description of the environment
Classification of the environment
Compatibility levels
Part 3: Limits
Emission limits
Immunity test levels (in so far as they do not fall under the responsibility of the product
committees)
Part 4: Testing and measurement techniques
Measurement techniques
Testing techniques
Part 5: Installation and mitigation guidelines
Installation guidelines
Mitigation methods and devices
Part 6: Generic standards
Part 9: Miscellaneous
Each part is further subdivided into several parts, published either as International Standards,
technical specifications or technical reports, some of which have already been published as
sections. Others will be published with the part number followed by a dash and completed by a
second number identifying the subdivision (example: 61000-6-1).

61000-4-1 © IEC:2006 – 11 – – 6 – 61000-4-1 © IEC:2006
ELECTROMAGNETIC COMPATIBILITY (EMC) –

Part 4-1: Testing and measurement techniques –
Overview of IEC 61000-4 series

1 Scope and object
This part of IEC 61000 covers testing and measuring techniques for electric and electronic
equipment (apparatus and systems) in its electromagnetic environment.
The object of this part is to give applicability assistance to the technical committees of IEC
or other bodies, users and manufacturers of electrical and electronic equipment on EMC
standards within the IEC 61000-4 series on testing and measurement techniques and to
provide general recommendations concerning the choice of relevant tests.
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of
the referenced document (including any amendments) applies.
IEC 60050(161), International Electrotechnical Vocabulary (IEV) – Chapter 161: Electro-
magnetic compatibility
IEC 61000-1-1, Electromagnetic Compatibility (EMC) – Part 1-1: General – Application and
interpretation of fundamental definitions and terms
IEC 61000-2-5, Electromagnetic Compatibility (EMC) – Part 2: Environment – Classification of
electromagnetic environments
IEC 61000-3-2, Electromagnetic compatibility (EMC) – Part 3-2: Limits –Limits for harmonic
current emissions (equipment input current ≤16 A per phase)
IEC 61000-3-3, Electromagnetic compatibility (EMC) – Part 3-3: Limits –Limitation of voltage
changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment
with rated current ≤16 A per phase and not subject to conditional connection
IEC/TS 61000-3-4, Electromagnetic compatibility (EMC) – Part 3-4: Limits – Limitation of
emission of harmonic currents in low-voltage power supply systems for equipment with rated
current greater than 16 A
IEC/TR 61000-3-5, Electromagnetic
...