IEC TS 61400-23:2001
(Main)Wind turbine generator systems - Part 23: Full-scale structural testing of rotor blades
Wind turbine generator systems - Part 23: Full-scale structural testing of rotor blades
Is a technical specification providing guidelines for the full-scale structural testing of wind turbine blades and for the interpretation or evaluation of results, as a possible part of a design verification of the integrity of the blade. Includes static strength tests, fatigue tests, and other tests determining blade properties.
This publication is of high relevance for Smart Grid.
General Information
Relations
Standards Content (Sample)
TECHNICAL IEC
SPECIFICATION
TS 61400-23
First edition
2001-04
Wind turbine generator systems –
Part 23:
Full-scale structural testing of rotor blades
Aérogénérateurs –
Partie 23:
Essais en vraie grandeur des structures des pales
Reference number
IEC/TS 61400-23:2001(E)
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/catlg-e.htm) enables
you to search by a variety of criteria including text searches, technical
committees and date of publication. On-line information is also available on
recently issued publications, withdrawn and replaced publications, as well as
corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/JP.htm) is also
available by email. Please contact the Customer Service Centre (see below) for
further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
TECHNICAL IEC
SPECIFICATION
TS 61400-23
First edition
2001-04
Wind turbine generator systems –
Part 23:
Full-scale structural testing of rotor blades
Aérogénérateurs –
Partie 23:
Essais en vraie grandeur des structures des pales
IEC 2001 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
Commission Electrotechnique Internationale
PRICE CODE
XB
International Electrotechnical Commission
For price, see current catalogue
– 2 – TS 61400-23 IEC:2001(E)
CONTENTS
FOREWORD . 4
INTRODUCTION .6
1 Scope . 7
2 Normative references . 7
3 Definitions. 8
4 Notation . 11
4.1 Symbols . 11
4.2 Greek symbols . 11
4.3 Subscripts . 11
4.4 Abbreviations . 12
5 General principles . 12
5.1 Purpose of tests . 12
5.2 Limit states . 12
5.3 Practical constraints . 13
5.4 Results of test . 13
6 Blade data. 14
6.1 General. 14
6.2 External dimensions and interfaces . 14
6.3 Blade characteristics . 15
6.4 Material data . 16
6.5 Design loads and conditions . 16
6.6 Areas to be tested . 18
6.7 Special blade modifications . 18
6.8 Root fixing. 18
6.9 Mechanisms. 18
7 Differences between design and test load conditions . 18
7.1 General. 18
7.2 Load introduction. 19
7.3 Bending moments and shear . 19
7.4 Flatwise and edgewise combinations . 20
7.5 Radial loads . 20
7.6 Torsion loads . 20
7.7 Mechanisms. 20
7.8 Environmental conditions. 20
7.9 Load spectrum and sequence. 21
8 Test loading .21
8.1 General. 21
8.2 Load-based testing. 21
8.3 Strength-based testing . 22
8.4 Static-test load aspects . 23
8.5 Fatigue-test load aspects . 24
8.6 Sequence of static and fatigue tests . 25
8.7 Mechanisms. 26
TS 61400-23 IEC:2001(E) – 3 –
9 Load factors for testing. 26
9.1 General. 26
9.2 Partial safety factors used in the design. 26
9.3 Test load factors . 27
9.4 Application of load factors to obtain the target load . 28
10 Evaluation of test load distribution in relation to design requirements . 29
10.1 General. 29
10.2 Influence of load introduction. 29
10.3 Static tests . 29
10.4 Fatigue tests . 33
11 Failure modes . 36
11.1 General. 36
11.2 Catastrophic failure . 37
11.3 Functional failure. 37
11.4 Superficial failure . 37
12 Test procedures and methods . 38
12.1 General. 38
12.2 Test stand and root fixture requirements. 38
12.3 Load introduction fixtures . 38
12.4 Static strength test . 39
12.5 Fatigue testing . 40
12.6 Advantages and disadvantages of test alternatives . 43
12.7 Deterministic corrections . 43
12.8 Data collection . 44
13 Other tests determining blade properties . 46
13.1 General. 46
13.2 Test stand deflections . 46
13.3 Deflection. 46
13.4 Stiffness distribution. 46
13.5 Strain distribution measurements. 47
13.6 Natural frequencies . 48
13.7 Damping . 48
13.8 Mode shapes. 48
13.9 Mass distribution . 48
13.10 Creep. 48
13.11 Other non-destructive testing. 48
13.12 Blade sectioning. 49
14 Reporting . 49
14.1 General. 49
14.2 Content . 49
Annex A (normative) Partial safety factors considerations . 51
Annex B (normative) Sensitivity of the evaluation to fatigue formulation. 52
Annex C (normative) Loading angle change considerations . 54
Annex D (informative) Examples of test set-ups . 56
Bibliography . 63
– 4 – TS 61400-23 IEC:2001(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
WIND TURBINE GENERATOR SYSTEMS –
Part 23: Full-scale structural testing of rotor blades
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical
committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work.
International, governmental and non-governmental organizations liaising with the IEC also participate in this
preparation. The IEC collaborates closely with the International Orga
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.