IEC 60728-6:2003

Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment

Lays down the measuring methods, performance requirements and data publication requirements of optical equipment of cable networks for for television signals, sound signals and interactive services.

General Information

• Status: Published
• Publication Date: 30-Jul-2003
• ICS: 33.060.40 - Cabled distribution systems
• ICS: 33.160.99 - Other audio, video and audiovisual equipment
• Technical Committee: TC 100 - Audio, video and multimedia systems and equipment
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 11-Apr-2011

Relations

• Revises: IEC 60728-6:2001 - Cabled distribution systems for television and sound signals - Part 6: Optical equipment
• Effective Date: 05-Sep-2023
• Revised: IEC 60728-6:2011 - Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD
60728-6
Second edition
2003-07
Cable networks for television signals,
sound signals and interactive services –
Part 6:
Optical equipment
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (http://www.iec.ch/searchpub/cur_fut.htm)
enables you to search by a variety of criteria including text searches, technical
committees and date of publication. On-line information is also available on
recently issued publications, withdrawn and replaced publications, as well as
corrigenda.
• IEC Just Published
This summary of recently issued publications (http://www.iec.ch/online_news/
justpub/jp_entry.htm) is also available by email. Please contact the Customer
Service Centre (see below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD
60728-6
Second edition
2003-07
Cable networks for television signals,
sound signals and interactive services –
Part 6:
Optical equipment
 IEC 2003  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
XA
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

– 2 – 60728-6  IEC:2003(E)
CONTENTS
FOREWORD . 4
INTRODUCTION .6
1 Scope . 7
2 Normative references. 7
3 Terms, definitions, symbols and abbreviations. 8
4 Methods of measurement.17
4.1 General measurement requirements .17
4.2 Optical power.17
4.3 Loss, isolation, directivity and coupling ratio .18
4.4 Return loss .19
4.5 Saturation output power of an optical amplifier .20
4.6 Polarization dependent loss .21
4.7 Centroidal wavelength and spectral width under modulation.22
4.8 Linewidth and chirping of transmitters with single mode lasers.23
4.9 Optical modulation index .25
4.10 Reference output level of an optical receiver .26
4.11 Slope and flatness .27
4.12 Composite second order distortion (CSO) of optical transmitters .29
4.13 Composite triple beats (CTB) of optical transmitters .30
4.14 Composite crossmodulation of optical transmitters .31
4.15 Receiver intermodulation.33
4.16 CSO of optical amplifiers.36
4.17 CTB of optical amplifiers .36
4.18 Carrier-to-noise ratio.36
4.19 Method for combined measurement of relative intensity noise (RIN), optical
modulation index and equivalent input noise current .40
4.20 Noise figure of optical amplifiers .42
4.21 Influence of fibre.43
4.22 SBS threshold.43
5 Universal performance requirements and recommendations .44
5.1 Safety.44
5.2 Electromagnetic compatibility (EMC) .44
5.3 Environmental.44
5.4 Marking .45
6 Active equipment .45
6.1 Optical downlink transmitters .45
6.2 Optical uplink transmitters.47
6.3 Optical receivers .49
6.4 Optical amplifiers .51
7 Passive equipment.52
7.1 Connectors and splices .52
7.1.1 Data publication requirements .52
Annex A (informative) A simplified method of measurement for return loss.53
Annex B (informative) Product specification worksheets for optical amplifiers.55
Bibliography .58

60728-6  IEC:2003(E) – 3 –
Figure 1 – Measurement of optical power.18
Figure 2 – Measurement of optical loss, directivity and isolation.19
Figure 3 – Measurement of the optical return loss.20
Figure 4 – Optical saturation output power .21
Figure 5 – Measurement of the polarization dependent loss .21
Figure 6 – Measurement of central wavelength and spectral width under modulation .22
Figure 7 – Measurement of the chirping and the linewidth of transmitters .24
Figure 8 – Measurement of the optical modulation index .26
Figure 9 – Measurement of the reference output level of an optical receiver .27
Figure 10 – Measurement of the frequency range and flatness.28
Figure 11 – Evaluation of the slope.28
Figure 12 – Evaluating the flatness .29
Figure 13 – Device under test for measuring CSO of optical transmitters .30
Figure 14 – Device under test for measuring CTB of optical transmitters .31
Figure 15 – Arrangement for measuring composite crossmodulation of optical transmitters .32
Figure 16 – Arrangement of test equipment for measuring receiver intermodulation.35
Figure 17 – System with internal noise sources.36
Figure 18 – PIN diode receiver .37
Figure 19 – Optical transmission system under test .38
Figure 20 – Arrangement of test equipment for carrier-to-noise measurement .38
Figure 21 – Measurement set-up for determination of the noise parameters and the
optical modulation index .42
Figure 22 – Arrangement for measuring the SBS threshold .44
Figure 23 – Classification of uplink transmitters .48
Figure A.1 – Test set-up for calibration .53
Figure A.2 – Measurement of the optical power of the light source .54
Figure A.3 – Test set-up for device under test.54
Figure A.4 – Measurement of the optical power at port A.54
Table 1 – Noise correction factors C for different noise level differences D.40
n
Table 2 – Data publication requirements for optical downlink transmitters .46
Table 3 – Recommendations for optical downlink transmitters.46
Table 4 – Requirements for optical downlink transmitters.47
Table 5 – Data publication requirements for optical uplink transmitters.48
Table 6 – Recommendations for optical uplink transmitters .49
Table 7 – Requirements for optical uplink transmitters .49
Table 8 – Classification of optical receivers .50
Table 9 – Data publication requirements for optical receivers .50
Table 10 – Recommendations for optical receivers .50
Table 11 – Performance requirements for optical receivers .51
Table B.1 – Minimum list of relevant parameters of power amplifiers to be specified for
analogue applications .55
Table B.2 – Minimum list of relevant parameters of line amplifiers to be specified for
analogue applications .56
Table B.3 – Minimum list of relevant parameters of optically amplified transmitters
(OAT) to be specified for analogue applications .57

– 4 – 60728-6  IEC:2003(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
CABLE NETWORKS FOR TELEVISION SIGNALS,
SOUND SIGNALS AND INTERACTIVE SERVICES –
Part 6: Optical equipment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to
technical committees; any IEC National Committee interested in the subject dealt with may participate in this
preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for Standardization
(ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
intereste
...