iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60695-5-1:2002

(Main)

Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance

Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance

IEC 60695-5-1:2002 Provides guidance on the following:
a) general aspects of corrosion damage test methods;
b) methods of measurement of corrosion damage;
c) consideration of test methods;
d) relevance of corrosion damage data to hazard assessment.
The structure of this second edition remains essentially the same as the first edition with the following additions:
- Information on fire scenarios and fire models has been added along with an update on the latest advances in the analysis of the fire effluent.
- The general classification of fires from ISO TR 9122-1 has been added.
- A new clause on the general aspects of the corrosivity of fire effluent which describes the types of corrosion damage effects and the factors affecting corrosivity.
- A new clause on the principles of corrosion damage measurement has been added describing the assessment of the corrosive potential and the consideration of the corrosivity test methods.
- A new table describing a summary of corrosion test methods.
- A new flowchart detailing the evaluation and consideration of corrosion damage test methods.
- The bibliography has been expanded.

Essais relatifs aux risques du feu - Partie 5-1: Effets des dommages de corrosion des effluents du feu - Guide général

IEC 60695-5-1:2002 Fournit un guide concernant:
a) les aspects généraux des méthodes d'essai des dommages provoqués par la corrosion;
b) les méthodes de mesure des dommages provoqués par la corrosion;
c) la prise en compte des méthodes d'essai;
d) la pertinence des données concernant les dommages de corrosion pour l'évaluation des risques.
La structure de la deuxième édition demeure pratiquement inchangée, à l'exception des éléments importants suivants qui ont été ajoutés:
- Information relative aux scénarios et aux modèles de feu ainsi qu'une mise à jour des dernières avancées réalisées dans l'analyse des effluents du feu.
- Classification générale des feux selon l'ISO TR 9122-1.
- Nouvel article relatif aux aspects généraux de la corrosivité des effluents du feu, décrivant les types d'effets des dommages de la corrosion et les facteurs affectant la corrosivité.
- Nouvel article relatif aux principes de mesure des dommages de la corrosion, décrivant l'évolution du potentiel corrosif et la prise en compte des méthodes d'essai de la corrosivité.
- Nouveau tableau résumant les méthodes d'essai de la corrosivité.
- Nouvel organigramme présentant en détail l'évaluation et la prise en compte des méthodes d'essai des dommages de la corrosion.
- Elargissement de la bibliographie.

General Information

Status
Published
Publication Date
19-Nov-2002
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
29.020 - Electrical engineering in general
Technical Committee
TC 89 - Fire hazard testing
Drafting Committee
WG 11 - TC 89/WG 11
Current Stage
DELPUB - Deleted Publication
Start Date
28-Jun-2019
Completion Date
28-Oct-2021
Ref Project

Relations

Revised
IEC 60695-5-1:2021 - Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
Effective Date
05-Sep-2023

Buy Standard

IEC 60695-5-1:2002 - Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidanceIEC 60695-5-1:2002 - Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
PreviousNext
Standard
IEC 60695-5-1:2002 - Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
English and French language
35 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NORME CEI
INTERNATIONALE IEC
60695-5-1
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2002-11
PUBLICATION FONDAMENTALE DE SÉCURITÉ
BASIC SAFETY PUBLICATION
Essais relatifs aux risques du feu –
Partie 5-1:
Effets des dommages de corrosion
des effluents du feu – Guide général
Fire hazard testing –
Part 5-1:
Corrosion damage effects of fire effluent –
General guidance
Numéro de référence
Reference number
CEI/IEC 60695-5-1:2002

---------------------- Page: 1 ----------------------
Numérotation des publications Publication numbering
Depuis le 1er janvier 1997, les publications de la CEI As from 1 January 1997 all IEC publications are
sont numérotées à partir de 60000. Ainsi, la CEI 34-1 issued with a designation in the 60000 series. For
devient la CEI 60034-1. example, IEC 34-1 is now referred to as IEC 60034-1.
Editions consolidées Consolidated editions
Les versions consolidées de certaines publications de la The IEC is now publishing consolidated versions of its
CEI incorporant les amendements sont disponibles. Par publications. For example, edition numbers 1.0, 1.1
exemple, les numéros d’édition 1.0, 1.1 et 1.2 indiquent and 1.2 refer, respectively, to the base publication,
respectivement la publication de base, la publication de the base publication incorporating amendment 1 and
base incorporant l’amendement 1, et la publication de the base publication incorporating amendments 1
base incorporant les amendements 1 et 2. and 2.
Informations supplémentaires Further information on IEC publications
sur les publications de la CEI
Le contenu technique des publications de la CEI est The technical content of IEC publications is kept
constamment revu par la CEI afin qu'il reflète l'état under constant review by the IEC, thus ensuring that
actuel de la technique. Des renseignements relatifs à the content reflects current technology. Information
cette publication, y compris sa validité, sont dispo- relating to this publication, including its validity, is
nibles dans le Catalogue des publications de la CEI available in the IEC Catalogue of publications
(voir ci-dessous) en plus des nouvelles éditions, (see below) in addition to new editions, amendments
amendements et corrigenda. Des informations sur les and corrigenda. Information on the subjects under
sujets à l’étude et l’avancement des travaux entrepris consideration and work in progress undertaken by the
par le comité d’études qui a élaboré cette publication, technical committee which has prepared this
ainsi que la liste des publications parues, sont publication, as well as the list of publications issued,
également disponibles par l’intermédiaire de: is also available from the following:
• Site web de la CEI (www.iec.ch) • IEC Web Site (www.iec.ch)
• Catalogue des publications de la CEI • Catalogue of IEC publications
Le catalogue en ligne sur le site web de la CEI The on-line catalogue on the IEC web site
(http://www.iec.ch/searchpub/cur_fut.htm) vous permet (http://www.iec.ch/searchpub/cur_fut.htm) enables
de faire des recherches en utilisant de nombreux you to search by a variety of criteria including text
critères, comprenant des recherches textuelles, par searches, technical committees and date of
comité d’études ou date de publication. Des publication. On-line information is also available
informations en ligne sont également disponibles sur on recently issued publications, withdrawn and
les nouvelles publications, les publications rempla- replaced publications, as well as corrigenda.
cées ou retirées, ainsi que sur les corrigenda.
• IEC Just Published • IEC Just Published
Ce résumé des dernières publications parues This summary of recently issued publications
(http://www.iec.ch/online_news/justpub/jp_entry.htm) (http://www.iec.ch/online_news/justpub/jp_entry.htm)
est aussi disponible par courrier électronique. is also available by email. Please contact the
Veuillez prendre contact avec le Service client Customer Service Centre (see below) for further
(voir ci-dessous) pour plus d’informations. information.
• Service clients • Customer Service Centre
Si vous avez des questions au sujet de cette If you have any questions regarding this
publication ou avez besoin de renseignements publication or need further assistance, please
supplémentaires, prenez contact avec le Service contact the Customer Service Centre:
clients:
Email: custserv@iec.ch Email: custserv@iec.ch
Tél: +41 22 919 02 11 Tel: +41 22 919 02 11
Fax: +41 22 919 03 00 Fax: +41 22 919 03 00
.

---------------------- Page: 2 ----------------------
NORME CEI
INTERNATIONALE IEC
60695-5-1
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2002-11
PUBLICATION FONDAMENTALE DE SÉCURITÉ
BASIC SAFETY PUBLICATION
Essais relatifs aux risques du feu –
Partie 5-1:
Effets des dommages de corrosion
des effluents du feu – Guide général
Fire hazard testing –
Part 5-1:
Corrosion damage effects of fire effluent –
General guidance
 IEC 2002 Droits de reproduction réservés  Copyright - all rights
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60695-6-2:2018(Main)
Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods

IEC 60695-6-2:2018 provides a summary of commonly used test methods for the assessment of smoke obscuration. It presents a brief summary of static and dynamic test methods in common use, either as international standards or national or industry standards. It includes special observations on their relevance to electrotechnical products and their materials and to fire scenarios, and gives recommendations on their use.
This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies.
It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.
This standard is to be used in conjunction with IEC 60695-6-1.
This standard cancels and replaces IEC 60695-6-2 published in 2011. This second edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) updated introduction;
b) updated normative references;
c) new text in 4.1;
d) deletion of references to IEC 60695-6-30 and -31 (withdrawn)
e) updates with respect to ISO 5659-2;
f) deletion of references to BS 6853 and CEI 20-37-3 (superseded);
g) deletion of references to ISO/TR 5924 (withdrawn);
h) updated text with respect to EN 50399;
i) updated text with respect to ISO 5660-1;
j) addition of new Subclause 7.5
k) deletion of Annex B;
l) deletion of Annex E;
m) additional bibliographic references.
Key words: Fire Hazard, Smoke Obscuration

  • Standard
    65 pages
    English and French language
    sale 15% off
IEC
IEC TS 60695-1-14:2017(Main)
Fire hazard testing - Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products

IEC TS 60695-1-14:2017(E) provides guidance about the levels of power and energy that could cause ignition and fire in a low voltage electrotechnical product. It can be used by Product Committees to determine what fire hazard safeguards might be used, based on the electrical energy that could be dissipated as heat.
This document deals with products used in normal atmospheres commonly available in the home and does not deal with special locations such as those in explosive atmospheres. It is intended as guidance to IEC committees, and is intended be used with respect to their individual applications.
It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.
This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.
Key words: Fire Hazard, Probability of Ignition, Power and Energy Levels

  • Technical specification
    15 pages
    English language
    sale 15% off
IEC
IEC 60695-1-30:2017(Main)
Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines

IEC 60695-1-30:2017 provides guidance for assessing and choosing candidate materials, components or sub-assemblies for making an end product based upon preselection testing.
It describes how preselection provides comparative fire hazard test methods to evaluate the performance of a test specimen and how preselection can be used in the selection of materials, parts, components and sub-assemblies during the design stage of an end product. It further describes how standardized test methods may be used as one part in the decision making processes directed to minimize the fire hazards from electrotechnical equipment. It takes into account the desired reaction to fire properties of the end product, and the possible effects of environmental conditions on the behaviour of the end product.
This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- Reference to IEC 60695-1-12;
- Modified Introduction;
- Clause 2: updated and additional normative references;
- Clause 3: updated and additional terms and definitions;
- Clause 4: updated text, with a requirement and normative reference to IEC 60695-1-10, IEC 60695-1-11 and IEC 60695-1-12;
- Clause 5: modified text;
- Annex A: updated references with additions and deletions;
- Annex B: Examples of materials used in attended appliances replaces the previous example of an ITE product and the Bibliographic references updated.
It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.
This standard is to be used in conjunction with IEC 60695-1-10:2016 and IEC 60695-1-11:2014.
This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.

  • Standard
    31 pages
    English and French language
    sale 15% off
IEC
IEC 60695-11-5:2016(Main)
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance

IEC 60695-11-5:2016 is also available as IEC 60695-11-5:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60695-11-5:2016 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test may be used as elements of a fire hazard assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- The scope has been broadened to allow this test method to also simulate the effects of small flames from outside the equipment;
- Propane and butane gas are the specified fuel source with a minimum purity of 95 %;
- A new concept has been added which allows the burner to be moved during the test to avoid dripping material from falling onto the tip of the burner tube;
- The burner tube material is now a referenced source;
- The reference for the copper block material has changed - the ISO publication (ISO 1337) has been withdrawn with no replacement. A new callout is now used and Informative Annex C and a bibliography have been added. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.

  • Standard
    45 pages
    English and French language
    sale 15% off
IEC
IEC 60695-1-10:2016(Main)
Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines

IEC 60695-1-10:2016 provides general guidance with respect to fire hazard testing on how to reduce to a tolerable level the risk of fire and the potential effects of fires involving electrotechnical products. It also serves as a signpost standard to the other guidance publications in the IEC 60695 series. It does not give guidance on the use of fire-resistant compartment boundaries or on the use of detection and suppression systems for the mitigation of fire risk. It describes the relationship between fire risk and the potential effects of fire, and provides guidance to IEC product committees on the applicability of qualitative and quantitative fire tests to the fire hazard assessment of electrotechnical products. Details of the calculation of fire risk are not included in the scope of this document. It emphasises the importance of the scenario approach to fire hazard and risk assessment and discusses criteria intended to ensure the development of technically sound hazard-based fire test methods. It discusses the different types of fire tests, in particular the nature of qualitative and quantitative fire tests. It also describes the circumstances under which it is appropriate for IEC product committees to maintain or develop qualitative fire tests. This standard is intended as guidance to IEC committees, and is to be used with respect to their individual applications. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- reference to IEC 60695-1-12;
- modified Introduction and Scope;
- updated normative references;
- updated terms and definitions;
- modified Table 1;
- addition of Table 2;
- new text in Subclauses 5.2, 5.3 and 5.4;
- mandatory text in Clause 8;
- Annex B changed to Annex A, and modified;
- new Annex B concerning common ignition sources.
This publication is to be read in conjunction with IEC 60695-1-11:2014 and IEC 60695-1-12:2015.
Key words: Fire Hazard, Fire Risk, Fire Safety Engineering

  • Standard
    49 pages
    English and French language
    sale 15% off
IEC
IEC 60695-8-2:2016(Main)
Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods

IEC 60695-8-2:2016 presents a summary of published test methods that are relevant to the determination of the heat released in fire tests on electrotechnical products or materials from which they are formed. It represents the current state of the art of the test methods and, where available, includes special observations on their relevance and use. The list of test methods is not to be considered exhaustive, and test methods that were not developed by the IEC are not to be considered as endorsed by the IEC unless this is specifically stated. Heat release data can be used as part of fire hazard assessment and in fire safety engineering, as discussed in IEC 60695-1-10, IEC 60695-1-11 and IEC 60695-1-12. This standard is to be used in conjunction with IEC 60695-8-1.
Key words: Fire Hazard, Heat Release, Fire Safety Engineering, Test Methods

  • Standard
    54 pages
    English and French language
    sale 15% off
IEC
IEC 60695-8-1:2016(Main)
Fire hazard testing - Part 8-1: Heat release - General guidance

IEC 60695-8-1:2016 provides guidance on the measurement and interpretation of heat release from electrotechnical products and materials from which they are constructed. Heat release data can be used as part of fire hazard assessment and in fire safety engineering, as described in IEC 60695-1-11 and IEC 60695-1-12. This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- a modified Introduction;
- reference to IEC 60695-1-12;
- updated normative references;
- revised terms and definitions;
- new text in 4.2.2, 4.2.3, 6.1 and 6.4, including several mandatory statements and
- mandatory statements in a new Subclause 6.5. This standard is to be used in conjunction with IEC 60695-8-2.
Key words: Fire Hazard, Heat Release, Fire Safety Engineering

  • Standard
    54 pages
    English and French language
    sale 15% off
IEC
IEC 60695-10-3:2016(Main)
Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

IEC 60695-10-3:2016 specifies a mould stress relief distortion test. It is applicable to electrotechnical equipment including parts made from polymeric materials. This test method is intended to evaluate the effects caused by relief of the residual process-induced stress, set in a moulded polymeric assembly of an end product. This stress relief occurs when the sample (energized or not), is exposed to conditioning at a defined temperature for a defined period of time. The test specimen is considered to have satisfactorily withstood the test if, after conditioning to room temperature, it meets defined test criteria. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies. This second edition of IEC 60695-10-3 cancels and replaces the first edition issued in 2002. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Updated references;
- Updated equipment;
- Added terms and definitions;
- and added Bibliography. Key words: Fire Hazard, Abnormal Heat, Fire Safety Engineering, Mould Stress Relief Distortion Test.

  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 60695-1-21:2016(Main)
Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods

IEC 60695-1-21:2016 provides a summary of test methods that are used to determine the ignitability of electrotechnical products or materials from which they are formed. It also includes test methods in which, by design, ignitability is a significant quantifiable characteristic. It represents the current state of the art of the test methods and, where available, includes special observations on their relevance and use. The list of test methods is not to be considered exhaustive, and test methods which were not developed by the IEC are not to be considered as endorsed by the IEC unless this is specifically stated. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies. This first edition of IEC 60695-1-21 cancels and replaces the first edition of IEC TR 60695-1-21 published in 2008. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Change from a TR to an international standard;
- Modified Introduction;
- Modified Scope;
- Updated normative references;
- Updated terms and definitions;
- Updates and new text in Clause 4;
- Addition of text concerning ASTM D 3638;
- Updates to Annex A and Updates to the bibliography. Key words: Fire Hazard, Fire Safety Engineering, Ignitability.

  • Standard
    69 pages
    English and French language
    sale 15% off
IEC
IEC 60695-1-20:2016(Main)
Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance

IEC 60695-1-20:2016 provides guidance on the ignitability of electrotechnical products and the materials from which they are formed. It gives guidance on the principles of ignitability; the selection of appropriate test methods and the use and interpretation of results. This first edition of IEC 60695-1-20 cancels and replaces the first edition of IEC TS 60695-1-20 published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- ISO 5660-1 has been added to the normative references;
- definitions of pyrolysis and short-circuit have been added to Clause 3;
- some text from the introduction has been moved to Clause 5 and is now part of the normative text and Clause 5 now contains several mandatory statements. This part of IEC 60695 is intended for use by technical committees in preparation of standards in accordance with IEC Guide 104 and ISO/IEC Guide 51. Key words: Fire Hazard, Fire Test Method, Fire Safety Engineering, Ignitability.

  • Standard
    46 pages
    English and French language
    sale 15% off