iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC/IEEE 63198-2775:2023

(Main)

Technical guidelines for smart hydroelectric power plant

Technical guidelines for smart hydroelectric power plant

IEC/IEEE 63198-2775:2023 describes the integrated control and management of smart hydroelectric power plants and groups of plants using the latest proven and widely accepted digital equipment. The descriptions are applicable to all types of hydroelectric power plants except tidal and ocean power plants.
Based on internationally standardized communication models, this document incorporates guidelines for communication networks, sensors, local monitoring and control equipment, Integrated Control and Management Platform (ICAMP) as well as intelligent applications. In addition, special attention is also given to cyber security.
This document considers the future structure of completely digitalized power plants equipped with digitalized sensors and actuators as well as the intelligent control and management of power plants with existing instrumentation.

Lignes directrices techniques d'une centrale hydroélectrique intelligente

IEC/IEEE 63198-2775:2023 décrit le contrôle et la gestion intégrés des centrales hydroélectriques intelligentes et des groupes de centrales utilisant les derniers équipements numériques éprouvés et largement acceptés. Les descriptions s’appliquent à tous les types de centrales hydroélectriques, à l’exception des centrales marémotrices et océaniques. Basé sur des modèles de communication normalisés à l’échelle internationale, ce document intègre des lignes directrices pour les réseaux de communication, les capteurs, les équipements locaux de surveillance et de contrôle, la plate-forme intégrée de contrôle et de gestion (ICAMP) ainsi que les applications intelligentes. En outre, une attention particulière est également accordée à la cybersécurité. Ce document examine la structure future des centrales électriques entièrement numérisées équipées de capteurs et d’actionneurs numérisés ainsi que le contrôle et la gestion intelligents des centrales électriques avec les instruments existants.

General Information

Status
Published
Publication Date
16-Feb-2023
ICS
27.140 - Hydraulic energy engineering
Technical Committee
TC 4 - Hydraulic turbines
Drafting Committee
WG 14 - TC 4/WG 14
Current Stage
PPUB - Publication issued
Start Date
06-Jan-2023
Completion Date
17-Feb-2023
Ref Project

Buy Standard

IEC/IEEE 63198-2775:2023 - Technical guidelines for smart hydroelectric power plant Released:2/17/2023IEC/IEEE 63198-2775:2023 - Technical guidelines for smart hydroelectric power plant Released:2/17/2023
PreviousNext
Standard
IEC/IEEE 63198-2775:2023 - Technical guidelines for smart hydroelectric power plant Released:2/17/2023
English and French language
158 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC/IEEE 63198-2775 ®
Edition 1.0 2023-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Technical guidelines for smart hydroelectric power plant

Lignes directrices techniques d’une centrale hydroélectrique intelligente

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing being
secured. Requests for permission to reproduce should be addressed to either IEC at the address below or IEC’s
member National Committee in the country of the requester or from IEEE.

IEC Secretariat Institute of Electrical and Electronics Engineers, Inc.
3, rue de Varembé 3 Park Avenue
CH-1211 Geneva 20 New York, NY 10016-5997
Switzerland United States of America
Tel.: +41 22 919 02 11 stds.ipr@ieee.org
info@iec.ch www.ieee.org
www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Découvrez notre puissant moteur de recherche et consultez
webstore.iec.ch/advsearchform gratuitement tous les aperçus des publications. Avec un
La recherche avancée permet de trouver des publications IEC abonnement, vous aurez toujours accès à un contenu à jour
en utilisant différents critères (numéro de référence, texte, adapté à vos besoins.
comité d’études, …). Elle donne aussi des informations sur les
projets et les publications remplacées ou retirées. Electropedia - www.electropedia.org

Le premier dictionnaire d'électrotechnologie en ligne au monde,
IEC Just Published - webstore.iec.ch/justpublished
avec plus de 22 300 articles terminologiques en anglais et en
Restez informé sur les nouvelles publications IEC. Just
français, ainsi que les termes équivalents dans 19 langues
Published détaille les nouvelles publications parues.
additionnelles. Egalement appelé Vocabulaire
Disponible en ligne et une fois par mois par email.
Electrotechnique International (IEV) en ligne.

Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC Products & Services Portal - products.iec.ch

IEC/IEEE 63198-2775 ®
Edition 1.0 2023-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Technical guidelines for smart hydroelectric power plant

Lignes directrices techniques d’une centrale hydroélectrique intelligente

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.140 ISBN 978-2-8322-6197-2

– 2 – IEC/IEEE 63198-2775:2023
© IEC/IEEE 2023
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 General principles . 11
5 System architecture . 12
5.1 Architecture model . 12
5.2 Logical architecture . 14
5.2.1 Overview . 14
5.2.2 Description of levels and zones . 16
5.3 Information model . 17
5.4 Network structure . 18
5.4.1 General . 18
5.4.2 Network structure of plant level and group-of-plants level . 18
5.4.3 Network structure of unit level and process level . 20
5.4.4 Variants for the network structure . 22
5.4.5 Network configuration of retrofit engineering . 26
5.4.6 External communication interfaces . 27
6 Basic support system. 27
6.1 Overview. 27
6.2 Time synchronization system . 28
6.3 Power supply system . 28
6.4 CCTV system . 28
6.5 Firefighting system . 29
6.6 Access control system . 29
6.7 Large screen display system . 29
7 Smart transducer . 30
7.1 Overview. 30
7.2 General technical requirements. 30
7.3 Structure of smart transducers . 31
8 Functional requirements of IEDs . 33
8.1 Overview. 33
8.2 General technical requirements. 33
8.3 Measurement and control . 34
8.3.1 Data acquisition and control execution . 34
8.3.2 Local control . 34
8.3.3 Synchronization . 35
8.3.4 Governor . 35
8.3.5 Excitation . 36
8.3.6 Speed measurement . 36
8.4 Monitoring . 37
8.4.1 Unit online monitoring . 37
8.4.2 Online monitoring of transmission and transformation equipment . 37
8.4.3 Hydrology telemetry . 38
8.4.4 Meteorological information acquisition . 38

© IEC/IEEE 2023
8.4.5 Dam safety monitoring . 39
8.5 Protection . 39
8.5.1 Overview . 39
8.5.2 Electrical protection . 39
8.5.3 Mechanical protection . 40
9 Platform and intelligent application . 41
9.1 General . 41
9.2 Integrated control and management platform . 41
9.2.1 General . 41
9.2.2 Data management . 41
9.2.3 Basic service . 43
9.2.4 Basic applications . 46
9.3 Intelligent applications . 48
9.3.1 Hydroelectric power plant economic operation . 48
9.3.2 Decision support for Condition-Based Maintenance (CBM) . 52
9.3.3 Dam safety analysis and evaluation . 54
9.3.4 Security and safety interaction . 54
9.3.5 Plant environment monitoring . 55
9.3.6 Intelligent patrol . 56
9.3.7 Operation and maintenance simulation . 57
9.3.8 Intelligent alarm . 58
9.3.9 Intelligent work sheet and operation sheet . 59
9.3.10 Data analysis and trend forecast . 59
9.3.11 Emergency command support . 61
10 Cyber security . 63
10.1 General . 63
10.2 Network structure security. 63
10.3 Data and communication security. 65
10.4 Device and software security . 67
10.5 Access control . 68
10.6 IT infrastructure comprehensive supervision and management . 68
10.7 Audit and modification . 69
10.8 Emergency plan and response .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 63461:2024(Main)
Pelton hydraulic turbines - Model acceptance tests

IEC 63461:2024 applies to laboratory model tests of any type of Pelton hydraulic turbine with unit power greater than 5 MW. It contains the rules governing test conduct and provides measures to be taken if any phase of the tests is disputed.
The main objectives of this document are:
- to define the terms and quantities used;
- to specify methods of testing and of measuring the quantities involved, in order to ascertain the hydraulic performance of the model;
- to specify the methods of computation of results and of comparison with guarantees;
- to determine if the contract guarantees that fall within the scope of this document have been fulfilled;
- and to define the extent, content and structure of the final report.
Full application of the procedures herein described is not generally justified for machines with smaller power. Nevertheless, this document can be used for such machines by agreement between the purchaser and the supplier.

  • Standard
    350 pages
    English and French language
    sale 15% off
IEC
IEC 63132-5:2023(Main)
Guidance for installation procedures and tolerances of hydroelectric machines - Part 5: Bulb turbines and generators

IEC 63132-5:2023 to establish, in a general way, suitable procedures and tolerances for the installation of hydroelectric turbines and generators. This guide presents a typical assembly. It should be recognized that there are many possible ways to assemble a unit. The size of the machines, design of the machines, layout of the powerhouse and delivery schedule of the components are some of the elements that could result in additional steps, the elimination of some steps and/or assembly sequences.

  • Standard
    71 pages
    English and French language
    sale 15% off
IEC
IEC 63132-6:2023(Main)
Guidance for installation procedures and tolerances of hydroelectric machines - Part 6: Vertical Pelton turbines

IEC 63132-6:2023 is to establish, in a general way, suitable procedures and tolerances for the installation of Pelton vertical turbines. This document presents a typical assembly and whenever the word "turbine" is used in this document, it refers to a vertical Pelton turbine. There are many possible ways to assemble a unit. The size of the machine, the design of the machine, the layout of the powerhouse or the delivery schedule of the components are some of the elements that could result in additional steps, or the elimination of some steps and/or assembly sequences.

  • Standard
    53 pages
    English and French language
    sale 15% off
IEC
IEC TS 62882:2020(Main)
Hydraulic machines - Francis turbine pressure fluctuation transposition

IEC/TS 62882:2020(E) which is a Technical Specification, provides pressure fluctuation transposition methods for Francis turbines and pump-turbines operating as turbines, including:
- description of pressure fluctuations, the phenomena causing them and the related problems;
- characterization of the phenomena covered by this document, including but not limited to inter-blade vortices, draft tube vortices rope and rotor-stator interaction;
- demonstration that both operating conditions and Thoma numbers (cavitation conditions) are primary parameters influencing pressure fluctuations;
- recommendation of ways to measure and analyse pressure fluctuations;
- identification of potential resonances in test rigs and prototypes;
- identification of methods, to transpose the measurement results from model to prototype or provide ways to predict pressure fluctuations in prototypes based on statistics or experience;
- recommendation of a data acquisition system, including the type and mounting position of model and prototype transducers and to define the similitude condition between model and prototype;
- presentation of pressure fluctuation measurements comparing the model turbine and the corresponding prototype;
- discussion of parameters used for the transposition from model to prototype, for example, the peak to peak value at 97 % confidence interval, the RMS value or the standard deviation in the time domain and the relation of main frequency and the rotational frequency in the frequency domain obtained by FFT;
- discussion of the uncertainty of the pressure fluctuation transposition from model to prototype;
- discussion of factors which influence the transposition, including those which cannot be simulated on the model test rig such as waterway system and mechanical system;
- establishment of the transposition methods for different types of pressure fluctuations;
- suggestion of possible methods for mitigating pressure fluctuation;
- definition of the limitations of the specification.
This document is limited to normal operation conditions. Hydraulic stability phenomena related to von Karman vortices, transients, runaway speed and speed no load are excluded from this document.
This document provides means to identify potential resonances in model test rigs and prototype turbines. Scaling-up resonance conditions are not treated in this document. When resonance exists, the transposition methods identified in this document do not apply. Under these conditions, the relationship between model and prototype pressure fluctuations cannot be determined.
This document is concerned neither with the structural details of the machines nor the mechanical properties of their components, so long as these characteristics do not affect model pressure fluctuations or the relationship between model and prototype pressure fluctuations.

  • Technical specification
    152 pages
    English language
    sale 15% off
IEC
IEC 63132-4:2020(Main)
Guidance for installation procedures and tolerances of hydroelectric machines - Part 4: Vertical Kaplan or propeller turbines

The purpose of IEC 63132-4:2020 is to establish, in a general way, suitable procedures and tolerances for the installation of a vertical Kaplan or propeller turbine. This document presents a typical assembly and whenever the word “turbine” is used in this document, it refers to a vertical Kaplan or propeller turbine. There are many possible ways to assemble a unit. The size of the machine, design of the machine, layout of the powerhouse or delivery schedule of the components are some of the elements that could result in additional steps, the elimination of some steps and/or assembly sequences. It is understood that a publication of this type will be binding only if, and to the extent that, both contracting parties have agreed upon it. This document excludes matters of purely commercial interest, except those inextricably bound up with the conduct of installation. The tolerances in this document have been established upon best practices and experience, although it is recognized that other standards specify different tolerances. Wherever this document specifies that documents, drawings or information is supplied by a manufacturer (or by manufacturers), each individual manufacturer will furnish the appropriate information for their own supply only.

  • Standard
    74 pages
    English and French language
    sale 15% off
IEC
IEC 63132-3:2020(Main)
Guidance for installation procedures and tolerances of hydroelectric machines - Part 3: Vertical Francis turbines or pump-turbines

The purpose of IEC 63132-3:2020 is to establish, in a general way, suitable procedures and tolerances for the installation of a vertical Francis turbine or pump-turbine. This document presents a typical assembly and whenever the word “turbine” is used in this document, it refers to a vertical Francis turbine or a pump-turbine. There are many possible ways to assemble a unit. The size of the machine, design of the machine, layout of the powerhouse or delivery schedule of the components are some of the elements that could result in additional steps, the elimination of some steps and/or assembly sequences. It is understood that a publication of this type will be binding only if, and to the extent that, both contracting parties have agreed upon it. This document excludes matters of purely commercial interest, except those inextricably bound up with the conduct of installation. The tolerances in this document have been established upon best practices and experience, although it is recognized that other standards specify different tolerances. Wherever this document specifies that documents, drawings or information is supplied by a manufacturer (or by manufacturers), each individual manufacturer will furnish the appropriate information for their own supply only.

  • Standard
    71 pages
    English and French language
    sale 15% off
IEC
IEC 63132-1:2020(Main)
Guidance for installation procedures and tolerances of hydroelectric machines - Part 1: General aspects

The purpose of IEC 63132-1:2020 is to establish, in a general way, suitable procedures and tolerances for the installation of hydroelectric turbines and generators. This document presents a typical assembly. There are many possible ways to assemble a unit. The size of the machines, design of the machines, layout of the powerhouse and delivery schedule of the components are some of the elements that could result in additional steps, the elimination of some steps and/or assembly sequences. It is understood that a publication of this type will be binding only if, and to the extent that, both contracting parties have agreed upon it. Installations for refurbishment projects or for small hydro projects are not in the scope of this document. An agreement between all parties is necessary. This document excludes matters of purely commercial interest, except those inextricably bound up with the conduct of installation. The tolerances in this document have been established upon best practices and experience, although it is recognized that other standards specify different tolerances. Wherever this document specifies that documents, drawings or information is supplied by a manufacturer (or manufacturers), each individual manufacturer will furnish the appropriate information for their own supply only.

  • Standard
    53 pages
    English and French language
    sale 15% off
IEC
IEC 63132-2:2020(Main)
Guidance for installation procedures and tolerances of hydroelectric machines - Part 2: Vertical generators

The purpose of IEC 63132-2:2020 is to establish, in a general way, suitable procedures and tolerances for installation of generator. This document presents a typical assembly. There are many possible ways to assemble a unit. The size of the machines, design of the machines, layout of the powerhouse or delivery schedule of the components are some of the elements that could result in additional steps, the elimination of some steps and/or assembly sequences. It is understood that a publication of this type will be binding only if, and to the extent that, both contracting parties have agreed upon it. This document excludes matters of purely commercial interest, except those inextricably bound up with the conduct of installation. This document applies to vertical generators according to IEC 60034-7. The tolerances in this document have been established upon best practices and experience, although it is recognized that other standards specify different tolerances. Brushless excitation system is not included in this document. Wherever this document specifies that documents, drawings or information is supplied by a manufacturer (or by manufacturers), each individual manufacturer will furnish the appropriate information for their own supply only.

  • Standard
    42 pages
    English and French language
    sale 15% off
IEC
IEC 62364:2019(Main)
Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in Kaplan, Francis and Pelton turbines

IEC 62364:2019 is available as IEC 62364:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62364:2019 gives guidelines for:
a) presenting data on hydro-abrasive erosion rates on several combinations of water quality, operating conditions, component materials, and component properties collected from a variety of hydro sites;
b) developing guidelines for the methods of minimizing hydro-abrasive erosion by modifications to hydraulic design for clean water. These guidelines do not include details such as hydraulic profile shapes which are determined by the hydraulic design experts for a given site;
c) developing guidelines based on “experience data” concerning the relative resistance of materials faced with hydro-abrasive erosion problems;
d) developing guidelines concerning the maintainability of materials with high resistance to hydro-abrasive erosion and hardcoatings;
e) developing guidelines on a recommended approach, which owners could and should take to ensure that specifications communicate the need for particular attention to this aspect of hydraulic design at their sites without establishing criteria which cannot be satisfied because the means are beyond the control of the manufacturers;
f) developing guidelines concerning operation mode of the hydro turbines in water with particle materials to increase the operation life.
It is assumed in this document that the water is not chemically aggressive. Since chemical aggressiveness is dependent upon so many possible chemical compositions, and the materials of the machine, it is beyond the scope of this document to address these issues. It is assumed in this document that cavitation is not present in the turbine. Cavitation and hydro-abrasive erosion can reinforce each other so that the resulting erosion is larger than the sum of cavitation erosion plus hydro-abrasive erosion. The quantitative relationship of the resulting hydro-abrasive erosion is not known and it is beyond the scope of this document to assess it, except to suggest that special efforts be made in the turbine design phase to minimize cavitation. Large solids (e.g. stones, wood, ice, metal objects, etc.) traveling with the water can impact turbine components and produce damage. This damage can in turn increase the flow turbulence thereby accelerating wear by both cavitation and hydro-abrasive erosion. Hydro-abrasive erosion resistant coatings can also be damaged locally by impact of large solids. It is beyond the scope of this document to address these issues. This document focuses mainly on hydroelectric powerplant equipment. Certain portions can also be applicable to other hydraulic machines. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) the formula for TBO in Pelton reference model has been modified;
b) the formula for calculating sampling interval has been modified;
c) the chapter in hydro-abrasive erosion resistant coatings has been substantially modified;
d) the annex with test data for hydro-abrasive erosion resistant materials has been removed;
e) a simplified hydro-abrasive erosion evaluation has been added.
Key words: Hydraulic Machines, Hydro-Abrasive Erosion, Kaplan, Francis, Pelton Turbines.

  • Standard
    241 pages
    English language
    sale 15% off
  • Standard
    150 pages
    English and French language
    sale 15% off
IEC
IEC 62256:2017(Main)
Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement

IEC 62256:2017 is also available as IEC 62256:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62256:2017 covers turbines, storage pumps and pump-turbines of all sizes and of the following types: Francis; Kaplan; propeller; Pelton (turbines only) and bulb turbines.
This document also identifies without detailed discussion, other powerhouse equipment that could affect or be affected by a turbine, storage pump, or pump-turbine rehabilitation. The object of this document is to assist in identifying, evaluating and executing rehabilitation and performance improvement projects for hydraulic turbines, storage pumps and pump-turbines. This document can be used by owners, consultants, and suppliers to define: needs and economics for rehabilitation and performance improvement; scope of work; specifications and evaluation of results. This document is intended to be: an aid in the decision process; an extensive source of information on rehabilitation; an identification of the key milestones in the rehabilitation process; and identification of the points to be addressed in the decision processes. This document is not intended to be a detailed engineering manual nor a maintenance document. This second edition cancels and replaces the first edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: Tables 2 to 23 modified, completed and moved to Annex A; 7.3.2: subclauses moved with text changes; new subclauses on temperature, noise, galvanic corrosion, galling and replacement of components without assessment; 7.3.3: complete new subclause on residual life; Tables 29 to 32 moved to Annex C; New Annex B with assessment examples.
Key words: Turbines, Storage pump, Pump turbines, Rehabilitation, Performance.

  • Standard
    158 pages
    English language
    sale 15% off
  • Standard
    488 pages
    English language
    sale 15% off
  • Standard
    326 pages
    English and French language
    sale 15% off