iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 62533:2010

(Main)

Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material

Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material

IEC 62533:2010 applies to hand-held instruments used for the detection and localization of radioactive photon emitting materials. These instruments are highly sensitive meaning that they are designed to detect slight variations in the range of usual photon background caused mainly by illicit trafficking or inadvertent movement of radioactive material. The object of this standard is to establish performance requirements including physical characteristics, general test conditions, radiation characteristics, electrical safety, and environmental conditions. This standard provides examples of acceptable test methods to determine if an instrument meets the requirements of this standard. The results of tests performed provide information to users on the capability of radiation detection instruments for reliably detecting photon sources.

Instrumentation pour la radioprotection - Instruments portables de haute sensibilité pour la détection photonique de matières radioactives

La CEI 62533:2010 s'applique aux instruments portables utilisés pour la détection et la localisation des substances radioactives émettant des photons. Ces instruments sont très sensibles, ce qui signifie qu'ils sont conçus pour détecter de faibles variations dans le domaine du bruit de fond photonique habituel, qui peuvent avoir pour origine principale un transport illicite ou des mouvements involontaires de substances radioactives. L'objet de la présente norme est d'établir des exigences d'aptitude à la fonction incluant les caractéristiques physiques, les conditions générales d'essai, les caractéristiques de rayonnement, les caractéristiques de sécurité électrique et les conditions environnementales. La présente norme fournit des exemples de méthodes d'essai acceptables, permettant de déterminer si un instrument est conforme aux exigences de la présente norme. Les résultats des essais donnent des informations aux utilisateurs sur l'aptitude des instruments de détection de rayonnement à détecter de manière fiable des sources photoniques.

General Information

Status
Published
Publication Date
20-Jun-2010
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
13.280 - Radiation protection
Technical Committee
SC 45B - Radiation protection instrumentation
Drafting Committee
WG 15 - TC 45/SC 45B/WG 15
Current Stage
PPUB - Publication issued
Start Date
15-Jul-2010
Completion Date
21-Jun-2010
Ref Project

Buy Standard

IEC 62533:2010 - Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive materialIEC 62533:2010 - Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
PreviousNext
Standard
IEC 62533:2010 - Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
English and French language
54 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 62533
®
Edition 1.0 2010-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Radiation protection instrumentation – Highly sensitive hand-held instruments
for photon detection of radioactive material

Instrumentation pour la radioprotection – Instruments portables de haute
sensibilité pour la détection photonique de matières radioactives

IEC 62533:2010

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2010 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00


A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00

---------------------- Page: 2 ----------------------
IEC 62533
®
Edition 1.0 2010-06
INTERNATIONAL
STANDARD
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 62963:2020(Main)
Radiation protection instrumentation - X-ray computed tomography (CT) inspection systems of bottled/canned liquids

IEC 62963:2020 describes the technical requirements, test methods, inspection requirements, markings and labelling, and requirements on the accompanying documents, packaging, shipping and storage for X-ray security inspection systems that inspect bottled or canned liquids (hereinafter referred to as "the system") based on X-ray computed tomography (CT). Here, the system is limited to those that feature tomographic scanning, not standard X-ray projection. This document is applicable to liquids, aerosols and gelatinous objects in transparent or visually opaque containers.
This technical performance document includes minimum or baseline performance requirements; regulators may require additional performance testing.

  • Standard
    54 pages
    English and French language
    sale 15% off
IEC
IEC 62387:2020(Main)
Radiation protection instrumentation - Dosimetry systems with integrating passive detectors for individual, workplace and environmental monitoring of photon and beta radiation

IEC 62387:2020 is available as IEC 62387:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62387:2020 applies to all kinds of passive dosimetry systems that are used for measuring:
- the personal dose equivalent Hp(10) (for individual whole body monitoring),
- the personal dose equivalent Hp(3) (for individual eye lens monitoring),
- the personal dose equivalent Hp(0,07) (for both individual whole body skin and local skin for extremity monitoring),
- the ambient dose equivalent H*(10) (for workplace and environmental monitoring),
- the directional dose equivalent H'(3) (for workplace and environmental monitoring), or
- the directional dose equivalent H'(0,07) (for workplace and environmental monitoring).
This document applies to dosimetry systems that measure external photon and/or beta radiation in the dose range between 0,01 mSv and 10 Sv and in the energy ranges given in Table 1. All the energy values are mean energies with respect to the fluence. The dosimetry systems usually use electronic devices for the data evaluation and thus are often computer controlled.

  • Standard
    180 pages
    English and French language
    sale 15% off
IEC
IEC 63121:2020(Main)
Radiation protection instrumentation - Vehicle-mounted mobile systems for the detection of illicit trafficking of radioactive materials

IEC 63121:2020 applies to vehicle-mounted mobile systems (also known as mobile systems or mobile monitors) that are used for the detection of illicit trafficking of radioactive materials; these instruments may also be used for protection of major public events and for rapid screening of large areas. These vehicle-mounted mobile systems consist of one or more radiation detectors mounted in a vehicle, e.g., car or van, which travels predominantly on public roads. This document does not apply to detection systems mounted in other types of vehicles, e.g., planes, helicopters, trains, or boats. Vehicle-mounted detection systems covered by this document are designed to detect radioactive sources while the vehicle is in motion. They may also be used as stationary monitors that scan stationary or moving objects. Vehicle-mounted mobile systems detect gamma radiation and may include neutron detection and/or identification of gamma-ray emitting radionuclides.

  • Standard
    40 pages
    English language
    sale 15% off
  • Standard
    83 pages
    English and French language
    sale 15% off
IEC
IEC 61322:2020(Main)
Radiation protection instrumentation - Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV

IEC 61322:2020 applies to installed dose equivalent rate meters, warning assemblies and monitors, as defined below. It covers equipment intended to measure neutron radiation in dose equivalent rates in the energy region between thermal and 20 MeV for the purposes of radiation protection.
Assemblies of this type are commonly defined as area radiation monitors. They are normally employed to determine continuously the radiological situation in working areas in which the radiation field may change with time, for example, nuclear power plants, particle accelerators, high-activity laboratories, fuel reprocessing plants, etc., and provide alarms when the radiation field goes outside predetermined limits.
The assemblies considered in this document comprise at least:
a detector assembly, which may, for example, consist of a detector probe (for thermal neutrons such as BF3 proportional counter, 3He proportional counter, 6LiI(Tl) scintillation detector, etc.) and a moderating and absorbing medium surrounding the detector;
a processing assembly, which may be fitted into a centralized panel, which, in the case of warning assemblies and monitors, provides signal outputs and contacts capable of activating alarm or other trip circuits;
alternatively, the case when all the processing electronics are placed within the detection unit (so called "smart blocks") may be considered. In this case the functions of the processing assembly will be composed of only the indication, the providing signal outputs and contacts.  
This second edition cancels and replaces the first edition published in 1994This edition includes the following significant technical changes with respect to the previous edition:
this document has been updated to take account of the requirements of the relevant IEC standards, IEC 60532:2010 and IEC 61005:2014.

  • Standard
    107 pages
    English and French language
    sale 15% off
IEC
IEC 62706:2019(Main)
Radiation protection instrumentation - Recommended climatic, electromagnetic and mechanical performance requirements and methods of tests

IEC 62706:2019 recommends the climatic, mechanical and electromagnetic performance requirements and methods of test for radiation protection instrumentation. This document also provides guidance regarding the setup of test equipment and instruments under test (IUT) for certain tests.
The object of this document is to define, for design and test purposes, the environments in which radiation protection instrumentation may be exposed. The environments addressed by this document are applicable to body-worn (e.g., personal radiation detectors, backpack, and dosemeters), handheld, transportable, mobile, and installed instrumentation.
This second edition cancels and replaces the first edition, issued in 2012. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of more details to selected methods of test;
b) revised radio frequency testing requirements based on measurements made at various locations;
c) added equipment and instrument setup guidance and recommendations.

  • Standard
    64 pages
    English and French language
    sale 15% off
IEC
IEC TS 63050:2019(Main)
Radiation protection instrumentation - Dosemeters for pulsed fields of ionizing radiation

IEC TS 63050:2019 applies to all types of dosemeters, irrespective of the type of radiation intended to be measured. Tests according to this document determine whether a single radiation pulse can be measured correctly even if the dosemeter is in the internal state relevant for measuring background or environmental radiation.
The annex in the document gives some parameter values for typical workplaces where pulsed radiation occurs.
This document considers the pulsation of the radiation field as an additional influence quantity like particle energy and direction of radiation incidence. Therefore, the tests described are additional to all the tests in the instrument specific standards. This document describes methods to determine the following characteristic parameters of the dosemeters:
the maximum measurable dose rate in the pulse, Hmeas,max
the maximum measurable dose in the pulse, Hmeas,max
the minimal pulse duration, tmeas,min and
the range for the pulse repetition frequency, fmeas,min  to fmeas,max

  • Technical specification
    23 pages
    English language
    sale 15% off
IEC
IEC 61563:2019(Main)
Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs

IEC 61563:2019 applies to instruments used to measure the activity and/or activity concentration of gamma-emitting radionuclides in food and/or foodstuffs. This document applies to instruments used both as gross count type instruments and pulse height analysing type instruments used in field conditions and in measurement facilities. This document does not apply to high-resolution spectrometers that use germanium detectors.
The instruments to which this document applies can be used to measure the activity and activity concentration of gamma-emitting radionuclides for a wide variety of samples, such as soil, sewage, plant, and animal life.
The object of this document is to establish performance requirements, to provide test methods and to specify general characteristics, general test conditions, and radiological, environmental, mechanical and electromagnetic characteristics to be used to determine whether an instrument meets the requirements of this document. The test results provide information to end-users and manufacturers regarding the capability of instrument for reliable measurement of the activity and/or activity concentration of gamma-emitting radionuclides.
This second edition cancels and replaces the first edition published in 2001. This edition includes the following significant technical changes with respect to the previous edition:
a) The previous edition applied to handheld-type and portable-type instruments. This edition applies to transportable-type and installed-type instruments, as well as the scope of the previous edition. The handheld-type and portable-type instruments are mainly used in case of a post accidental situation, however, the transportable-type and installed-type instruments can be used through recovery phase.
b) Uncertainty of measurement according to GUM is introduced.
c) Detection limit defined in ISO 11929 is introduced to specify a minimum detectable activity.
d) Environmental requirements, mechanical requirements and electromagnetic requirements are updated according to IEC 62706.
e) Sample format of measuring report is introduced

  • Standard
    71 pages
    English and French language
    sale 15% off
IEC
IEC TR 61577-5:2019(Main)
Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 5: General properties of radon and radon decay products and their measurement methods

IEC TR 61577-5:2019 provides basic data and technical information in order to support the design of instruments and their practical application for the measurement. The document covers 222Rn as well as 220Rn and the short-lived decay products of both. It is an accompanying document for the application of the technical standards series IEC 61577, and provides physical and technical fundamentals of the measurements methods.

  • Technical report
    57 pages
    English language
    sale 15% off
IEC
IEC 62244:2019(Main)
Radiation protection instrumentation - Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials

IEC 62244:2019 defines the performance requirements of installed monitors used for the detection of gamma and neutron radiation emitters. These monitors are commonly known as radiation portal monitors or RPMs. They are used to monitor vehicles, cargo containers, people, or packages and are typically located at national and international border crossings. They may be used at any location where there is a need for this type of monitoring. This document establishes the general, radiological, climatic, mechanical, electric and electromagnetic and documentation requirements and associated test methods. This document does not apply to the performance of spectroscopy-based portal monitors covered in IEC 62484. This second edition cancels and replaces the first edition issued in 2006. This edition includes the following significant technical changes with respect to the previous edition:
a) making the standard consistent with the new standards for detection of illicit trafficking of radioactive material (see the Introduction);
b) creating unformed functionality test for all environmental, electromagnetic and mechanical tests and a requirement for the coefficient of variation of each nominal mean reading;
c) reference to IEC 62706 for the environmental, electromagnetic and mechanical test conditions;
d) adding information regarding climatic exposures.

  • Standard
    55 pages
    English and French language
    sale 15% off
IEC
IEC 62945:2018(Main)
Radiation protection instrumentation - Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems

IEC 62945:2018 provides test methods for the evaluation of image quality of computed tomography (CT) security-screening systems. The quality of data for automated analysis is the primary concern. Security screening systems are generally used to scan parcels, including luggage, for the presence of illicit items such as explosives, drugs, or other contraband. Many of the screening systems currently used, particularly in transportation security applications, are based on CT imaging technology.

  • Standard
    173 pages
    English and French language
    sale 15% off