Technical drawings — Construction drawings — Simplified representation of demolition and rebuilding

Specifies rules for symbols and markings in general arrangement drawings and assembly drawings. In general the applications shown concern plans. Views and sections can be shown similarly. Outlines, dimensions and information in texts and the representation of building construction and parts of buildings are listed in form of tables.

Dessins techniques — Dessins de construction — Représentation simplifiée de démolition et de reconstruction

La présente Norme internationale prescrit des règles générales pour des symboles, inscriptions et représentations simplifiées de démolition et de reconstruction sur des dessins d'ensemble et d'assemblage. En général, les applications indiquées se réfèrent aux plans. Les vues et les coupes peuvent être traitées de la même manière.

Tehnične risbe - Gradbeniške risbe - Poenostavljeno prikazovanje porušenih in novozgrajenih delov

General Information

Status
Published
Publication Date
31-Oct-1983
Current Stage
9093 - International Standard confirmed
Completion Date
26-Jan-2023

Buy Standard

Standard
ISO 7518:1983 - Technical drawings -- Construction drawings -- Simplified representation of demolition and rebuilding
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7518:1995
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 7518:1983 - Dessins techniques -- Dessins de construction -- Représentation simplifiée de démolition et de reconstruction
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7518:1983 - Dessins techniques -- Dessins de construction -- Représentation simplifiée de démolition et de reconstruction
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ternational Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONoME)I(PLYHAPO~HAR OPf-AHM3ALWlfl fl0 CTAH~APTld3AWU ’l~RGANISATION INTERNATIONALE DE NORMALISATION
Construction drawings -
Technical drawings -
Simplified representation of demolition and rebuilding
Dessins de construction - Repr&ntation simplifibe de dkmolition et de reconstruction
Dessins techniques -
First edition - 1983-11-01
Ref. No. ISO 75184983 (E)
UDC 744.43: 69
Ei
-
M
Descriptors : technical drawings, buildings, Symbols, marking, graphic Symbols.
0
Price based on 2 pages
v)

---------------------- Page: 1 ----------------------
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bedies). The work of developing International
Standards is carried out through ISO technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take patt in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 7518 was developed by Technical Committee ISO/TC 10,
Technical drawings, and was circulated to the member bodies in January 1982.
lt has been approved by the member bodies of the following countries:
Australia South Africa, Rep. of
India
Austria Spain
Italy
Belgium Japan Sweden
Brazil Netherlands Thailand
Canada New Zealand USA
China Poland USSR
Egypt, Arab Rep. of Romania
docu
The member bodies of following countries expressed disapproval of the
on technical grounds :
Finland
Norway
United Kingdom
0 International Organkation for Standardization, 1983 0
Printed in Switzerland

---------------------- Page: 2 ----------------------
ISO 7518-1983 (E)
INTERNATIONAL STANDARD
Construction drawings -
Technical drawings -
Simplified representation of demolition and rebuilding
1 Scope and field of application ISO 4069, BuiIding and civt7 engineering drawings - Represen-
tation of areas on sections and views - General principles.
This International Standard specifies rules for Symbols, mark-
in
...

SLOVENSKI STANDARD
SIST ISO 7518:1995
01-junij-1995
7HKQLþQHULVEH*UDGEHQLãNHULVEH3RHQRVWDYOMHQRSULND]RYDQMHSRUXãHQLKLQ
QRYR]JUDMHQLKGHORY
Technical drawings -- Construction drawings -- Simplified representation of demolition
and rebuilding
Dessins techniques -- Dessins de construction -- Représentation simplifiée de démolition
et de reconstruction
Ta slovenski standard je istoveten z: ISO 7518:1983
ICS:
01.100.30 *UDGEHQLQDþUWL Construction drawings
SIST ISO 7518:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 7518:1995

---------------------- Page: 2 ----------------------

SIST ISO 7518:1995
ternational Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONoME)I(PLYHAPO~HAR OPf-AHM3ALWlfl fl0 CTAH~APTld3AWU ’l~RGANISATION INTERNATIONALE DE NORMALISATION
Construction drawings -
Technical drawings -
Simplified representation of demolition and rebuilding
Dessins de construction - Repr&ntation simplifibe de dkmolition et de reconstruction
Dessins techniques -
First edition - 1983-11-01
Ref. No. ISO 75184983 (E)
UDC 744.43: 69
Ei
-
M
Descriptors : technical drawings, buildings, Symbols, marking, graphic Symbols.
0
Price based on 2 pages
v)

---------------------- Page: 3 ----------------------

SIST ISO 7518:1995
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bedies). The work of developing International
Standards is carried out through ISO technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take patt in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 7518 was developed by Technical Committee ISO/TC 10,
Technical drawings, and was circulated to the member bodies in January 1982.
lt has been approved by the member bodies of the following countries:
Australia South Africa, Rep. of
India
Austria Spain
Italy
Belgium Japan Sweden
Brazil Netherlands Thailand
Canada New Zealand USA
China Poland USSR
Egypt, Arab Rep. of Romania
docu
The member bodies of following countries expressed disapproval of the
on technical grounds :
Finland
Norway
United Kingdom
0 International Organkation for Standardization, 1983 0
Printed in Switzerland

---------------------- Page: 4 ----------------------

...

Norme internationale 7518
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlE~YHAPO&lAR OPTAHH3AlWlR n0 CTAHIJAPTH3ALlMM~RGANISATION INTERNATIONALE DE NORMALISATION
Dessins techniques - Dessins de construction -
Représentation simplifiée de démolition et de
reconstruction
Technical drawings - Construction drawings - Simplifïed represen tation of demolition and rebuilding
Première édition - 1983-11-01
CDU 744.43: 69 Réf. no : ISO 75184983 (FI
Descripteurs : dessin industriel, bâtiment, symbole, marquage, symbole graphique.
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 7518 a été élaborée par le comité technique ISO/TC 10,
Dessins techniques, et a été soumise aux comités membres en janvier 1982.
Les comités membres des pays suivants l’ont approuvée:
Afrique du Sud, Rép. d’ Égypte, Rép. d’
Pologne
Australie Espagne Roumanie
Autriche Inde
Suede
Belgique Italie Thailande
Brésil Japon
URSS
Canada Nouvelle-Zélande USA
Chine Pays- Bas
Les comités membres des su ivants l’ont désapprouvée pour des raisons tech-
PWS
niques :
Finlande
Norvbge
Royaume-Uni
0
0 Organisation internationale de normalisation, 1983
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 75184983 (FI
NORME INTERNATIONALE
Dessins de construction -
Dessins techniques -
démolition et de
Représentation simplifiée de
reconstruction
ISO 4069, Dessins de bâtiment et de génie civl - Représenta-
1 Objet et domaine d’application
tion des surfaces sur des coupes et des vues - Principes géné-
raux.
La présente Norme internationale prescrit des régles générales
pour des symboles, inscriptions et représentations simplifiées
3 Principes généraux
de démolition et de reconstruction sur des dessins d’ensemble
et d’assemblage.
La démolition et la reconstruction
...

Norme internationale 7518
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlE~YHAPO&lAR OPTAHH3AlWlR n0 CTAHIJAPTH3ALlMM~RGANISATION INTERNATIONALE DE NORMALISATION
Dessins techniques - Dessins de construction -
Représentation simplifiée de démolition et de
reconstruction
Technical drawings - Construction drawings - Simplifïed represen tation of demolition and rebuilding
Première édition - 1983-11-01
CDU 744.43: 69 Réf. no : ISO 75184983 (FI
Descripteurs : dessin industriel, bâtiment, symbole, marquage, symbole graphique.
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 7518 a été élaborée par le comité technique ISO/TC 10,
Dessins techniques, et a été soumise aux comités membres en janvier 1982.
Les comités membres des pays suivants l’ont approuvée:
Afrique du Sud, Rép. d’ Égypte, Rép. d’
Pologne
Australie Espagne Roumanie
Autriche Inde
Suede
Belgique Italie Thailande
Brésil Japon
URSS
Canada Nouvelle-Zélande USA
Chine Pays- Bas
Les comités membres des su ivants l’ont désapprouvée pour des raisons tech-
PWS
niques :
Finlande
Norvbge
Royaume-Uni
0
0 Organisation internationale de normalisation, 1983
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 75184983 (FI
NORME INTERNATIONALE
Dessins de construction -
Dessins techniques -
démolition et de
Représentation simplifiée de
reconstruction
ISO 4069, Dessins de bâtiment et de génie civl - Représenta-
1 Objet et domaine d’application
tion des surfaces sur des coupes et des vues - Principes géné-
raux.
La présente Norme internationale prescrit des régles générales
pour des symboles, inscriptions et représentations simplifiées
3 Principes généraux
de démolition et de reconstruction sur des dessins d’ensemble
et d’assemblage.
La démolition et la reconstruction
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.