iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO/TS 13399-302:2013

(Main)

Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools

Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools

ISO/TS 13399-302:2013 specifies a concept for the design of tool items, limited to any kind of drilling and countersinking tools with solid cutting edges, together with the usage of the related properties and domains of values. ISO/TS 13399-302:2013 specifies a common way of designing simplified models that contain: definitions and identifications of the design features of drills and countersinking tools with solid cutting edges, with a link to the properties used; definitions and identifications of the internal structure of the 3D model that represents the features and properties of drills and countersinking tools with solid cutting edges.

Représentation et échange des données relatives aux outils coupants — Partie 302: Description des modèles 3D basés sur les propriétés de l'ISO/TS 13399-3: Modélisation des forets monoblocs et des outils de fraisage

La présente partie de l'ISO 13399 spécifie un concept pour la conception des éléments coupants, limité à tous les types de forets et d'outils de fraisage à arêtes monoblocs, utilisant les propriétés et domaines de valeurs associés. La présente partie de l'ISO 13399 spécifie une façon commune de concevoir des modèles simplifiés contenant les éléments suivants: — des définitions et identifications des caractéristiques de conception des forets et d'outils de fraisage à arêtes monoblocs, avec un lien vers les propriétés utilisées; — des définitions et identifications de la structure interne du modèle 3D qui représente les caractéristiques et les propriétés des forets et d'outils de fraisage à arêtes monoblocs; Les éléments suivants n'entrent pas dans le domaine d'application de la présente partie de l'ISO 13399: — les applications où les données standards peuvent être stockées ou référencées; — le concept de modèles 3D pour les outils coupants; — le concept de modèles 3D pour les éléments coupants; — le concept de modèles 3D pour d'autres éléments de l'outil non décrits dans la présente partie de l'ISO 13399; — le concept de modèles 3D pour les éléments relatifs aux attachements; — le concept de modèles 3D pour les éléments relatifs aux assemblages et éléments auxiliaires.

General Information

Status
Published
Publication Date
06-Oct-2013
ICS
25.100.01 - Cutting tools in general
35.240.50 - IT applications in industry
Technical Committee
ISO/TC 29 - Small tools
Drafting Committee
ISO/TC 29/WG 34 - Cutting tool data representation and exchange
Current Stage
9093 - International Standard confirmed
Completion Date
31-Jan-2024
Ref Project

Buy Standard

ISO/TS 13399-302:2013 - Cutting tool data representation and exchangeISO/TS 13399-302:2013 - Cutting tool data representation and exchange
PreviousNext
Technical specification
ISO/TS 13399-302:2013 - Cutting tool data representation and exchange
English language
46 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/TS 13399-302:2013 - Représentation et échange des données relatives aux outils coupantsISO/TS 13399-302:2013 - Représentation et échange des données relatives aux outils coupants
PreviousNext
Technical specification
ISO/TS 13399-302:2013 - Représentation et échange des données relatives aux outils coupants
French language
44 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

TECHNICAL ISO/TS
SPECIFICATION 13399-302
First edition
2013-10-15
Cutting tool data representation and
exchange —
Part 302:
Concept for the design of 3D models
based on properties according to ISO/
TS 13399-3: Modelling of solid drills
and countersinking tools
Représentation et échange des données relatives aux outils coupants —
Partie 302: Description des modèles 3D basés sur les propriétés de l’ISO/
TS 13399-3: Modélisation des forets monoblocs et des outils de lamage
Reference number
ISO/TS 13399-302:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO/TS 13399-302:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 13399-302:2013(E)

Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Starting elements, coordinate systems, planes . 1
3.1 General . 1
3.2 Reference system . 2
3.3 Coordinate system at the cutting part . 2
3.4 MCS coordinate system . 3
3.5 Planes . 4
3.6 Cutting reference point (CRP) . 4
4 Design of the model . 5
4.1 General . 5
4.2 Necessary parameters for the connection interface feature . 6
5 Twist drill . 6
5.1 General . 6
5.2 Necessary properties . 7
5.3 Geometry of the non-cutting part including the connection . 8
...

SPÉCIFICATION ISO/TS
TECHNIQUE 13399-302
Première édition
2013-10-15
Représentation et échange des
données relatives aux outils
coupants —
Partie 302:
Description des modèles 3D basés sur
les propriétés de l'ISO/TS 13399-3:
Modélisation des forets monoblocs et
des outils de fraisage
Cutting tool data representation and exchange —
Part 302: Concept for the design of 3D models based on properties
according to ISO/TS 13399-3: Modelling of solid drills and
countersinking tools
Numéro de référence
ISO/TS 13399-302:2013(F)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO/TS 13399-302:2013(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2013
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2013 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/TS 13399-302:2013(F)

Sommaire Page
Avant-propos .v
Introduction .vii
1 Domaine d'application . 1
2 Références normatives . 1
3 Éléments de départ, systèmes de coordonnées, plans . 2
3.1 Généralités . 2
3.2 Système de référence . 2
3.3 Système de coordonnées sur la partie coupante . 2
3.4 Système de coordonnées MCS. 3
3.5 Plans . 4
3.6 Point de coupe de référence (CRP) . 5
4 Conception du modèle . 5
4.1 Généralités . 5
4.2 Paramètres nécessaires pour la caractéristique d’interface de connexion. 6
5 Foret hélicoïdal . 6
5.1 Généralités . 6
5.2 Propriétés nécessaires . 7
5.3 Géométrie de la partie non-coupante, y compris le raccordement . 8
5.4 Géométrie de la partie c
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO/TS 13399-3:2021(Main)
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items

This document specifies a reference dictionary for tool items, together with their descriptive properties and domains of values. This document specifies a reference dictionary containing: — definitions and identifications of the classes of tool items and their features, with an associated classification scheme; — definitions and identifications of the data element types that represents the properties of tool items and their features; — definitions and identifications of domains of values for describing the above-mentioned data element types. The following are within the scope of this document: — standard data that represent the various classes of tool items and tool item features; — standard data that represent the various properties of tool items and tool item features; — standard data that represent domains of values used for properties of tool items and tool item features; — definition of cutting operations; — definitions of reference systems for tool items and their properties; — one implementation method by which the standard data defined in this document can be exchanged. NOTE 1 The implementation method by which the standard data defined in this document can be exchanged is specified in ISO 10303-21. The following are outside the scope of this document: — specialized or expert knowledge in the design and use of cutting tools; — rules to determine what information should be communicated; — applications where these standard data can be stored or referenced; — implementation methods other than the one defined in this document by which the standard data can be exchanged and referenced; — information model for cutting tools; — definitions of classes and properties for cutting items; — definitions of classes and properties for adaptive items; — definitions of classes and properties for assembly items; — definitions of classes and properties for connection systems; — definitions of classes and properties for reference systems. NOTE 2 The information model for cutting tools is defined in ISO 13399-1. NOTE 3 The definitions of classes and properties for cutting items, adaptive items, and assembly items are provided in ISO/TS 13399-2, ISO/TS 13399-4, and ISO/TS 13399-5, respectively. NOTE 4 The definitions of classes and properties for connection systems and reference systems are provided in ISO/TS 13399-50.

  • Technical specification
    461 pages
    English language
    sale 15% off
  • Technical specification
    465 pages
    French language
    sale 15% off
ISO
ISO/TS 13399-2:2021(Main)
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items

This document specifies a reference dictionary for cutting items, together with their descriptive properties and domains of values. This document specifies a reference dictionary containing: — definitions and identifications of the classes of cutting items and their features, with an associated classification scheme; — definitions and identifications of the data element types that represent the properties of cutting items and their features; — definitions and identifications of domains of values for describing the above-mentioned data element types. The following are within the scope of this document: — standard data that represent the various classes of cutting items and cutting item features; — standard data that represent the various properties of cutting items and cutting item features; — standard data that represent domains of values used for properties of cutting items and cutting item features; — definitions of reference systems for cutting items and their properties; — one implementation method by which the standard data defined in this document can be exchanged. NOTE 1 The implementation method by which the standard data defined in this document can be exchanged is specified in ISO 10303-21. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — implementation methods other than the one defined in this document by which the standard data can be exchanged and referenced; — information model for cutting tools; — definitions of classes and properties for tool items; — definitions of classes and properties for adaptive items; — definitions of classes and properties for assembly items and auxiliary items. NOTE 2 The information model for cutting tools is defined in ISO 13399-1. NOTE 3 The definitions of classes and properties for tool items, adaptive items, assembly items, and auxiliary items are provided in ISO/TS 13399-3, ISO/TS 13399-4, and ISO/TS 13399-5, respectively.

  • Technical specification
    201 pages
    English language
    sale 15% off
  • Technical specification
    203 pages
    French language
    sale 15% off
  • Technical specification
    203 pages
    French language
    sale 15% off
ISO
ISO/TS 13399-4:2021(Main)
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items

This document specifies a reference dictionary for adaptive items, together with their descriptive properties and domains of values. This document specifies a reference dictionary containing: — definitions and identifications of the classes of adaptive items, with an associated classification scheme; — definitions and identifications of the data element types that represents the properties of adaptive items; — definitions and identifications of domains of values for describing the above-mentioned data element types. The following are within the scope of this document: — standard data that represent the various classes of adaptive items; — standard data that represent the various properties of adaptive items; — standard data that represent domains of values used for properties of adaptive items; — one implementation method by which the standard data defined in this document can be exchanged. NOTE 1 The implementation method by which the standard data defined in this document can be exchanged is specified in ISO 10303-21. The following are outside the scope of this document: — specialized or expert knowledge in the design and use of cutting tools; — rules to determine what information should be communicated; — applications where these standard data can be stored or referenced; — implementation methods other than the one defined in this document by which the standard data can be exchanged and referenced; — information model for cutting tools; — definitions of classes and properties for cutting items; — definitions of classes and properties for tool items; — definitions of classes and properties for assembly items; — definitions of classes and properties for connection systems; — definitions of classes and properties for reference systems. NOTE 2 The information model for cutting tools is defined in ISO 13399-1. NOTE 3 The definitions of classes and properties for cutting items, tool items, and assembly items are provided in ISO/TS 13399-2, ISO/TS 13399-3, and ISO/TS 13399-5. NOTE 4 The definitions of classes and properties for connection systems and reference systems are provided in ISO/TS 13399-50.

  • Technical specification
    199 pages
    English language
    sale 15% off
  • Technical specification
    200 pages
    French language
    sale 15% off
ISO
ISO/TS 13399-313:2019(Main)
Cutting tool data representation and exchange — Part 313: Creation and exchange of 3D models — Burrs

This document defines the concept of how to design tool items, limited to any kind of burrs, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of burrs. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — creation and exchange of 3D models for cutting tools; — creation and exchange of 3D models for cutting items; — creation and exchange of 3D models for other tool items not described in the scope of this document; — creation and exchange of 3D models for adaptive items; — creation and exchange of 3D models for assembly items and auxiliary items.

  • Technical specification
    30 pages
    English language
    sale 15% off
  • Technical specification
    30 pages
    French language
    sale 15% off
ISO
ISO/TS 13399-406:2019(Main)
Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface

This document defines the concept of how to design the connection interfaces for adaptive and tool items, limited to any kind of standardized connections, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of connection interface. Not all dimensions given in this document are defined in the ISO 13399 series. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for other connection interfaces not being described in the scope of this document; — concept of 3D models for adaptive items; — concept of 3D models for assembly items and auxiliary items.

  • Technical specification
    43 pages
    English language
    sale 15% off
  • Technical specification
    43 pages
    French language
    sale 15% off
ISO
ISO/TS 13399-403:2018(Main)
Cutting tool data representation and exchange — Part 403: Creation and exchange of 3D models — Modelling of driven tool units

This document defines the concept of how to design adaptive items, limited to any kind of driven tool units, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of driven tool units. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for tool items; — concept of 3D models for other adaptive items not being described in the scope of this document; — concept of 3D models for assembly items and auxiliary items.

  • Technical specification
    34 pages
    English language
    sale 15% off
  • Technical specification
    34 pages
    French language
    sale 15% off
ISO
ISO/TS 13399-315:2018(Main)
Cutting tool data representation and exchange — Part 315: Creation and exchange of 3D models — Modelling of machine operated feed out tools

This document specifies a concept for the design of machine operated feed out tools, limited to any kind of machine operated feed out tools, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of machine operated feed out tools. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — creation and exchange of 3D for cutting tools; — creation and exchange of 3D for cutting items; — creation and exchange of 3D for tool items; — creation and exchange of 3D for other adaptive items not being described in the scope of this document; — creation and exchange of 3D for assembly items and auxiliary items.

  • Technical specification
    40 pages
    English language
    sale 15% off
  • Technical specification
    41 pages
    French language
    sale 15% off
ISO
ISO/TS 13399-306:2018(Main)
Cutting tool data representation and exchange — Part 306: Creation and exchange of 3D models — Drills and countersinking tools for indexable inserts

This document specifies a concept for the design of tool items, limited to any kind drilling and countersinking tools for indexable inserts, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of drills and countersinking tools for indexable inserts. The following are outside the scope of this document: — applications where these standard data may be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for other tool items not being described in the scope of this document; — concept of 3D models for adaptive items; — concept of 3D models for assembly items and auxiliary items.

  • Technical specification
    58 pages
    English language
    sale 15% off
  • Technical specification
    59 pages
    French language
    sale 15% off
ISO
ISO/TS 13399-314:2018(Main)
Cutting tool data representation and exchange — Part 314: Creation and exchange of 3D models — Cartridges for indexable inserts

This document specifies a concept for the design of tool items, limited to any kind of cartridges for indexable inserts, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of cartridges for indexable inserts. The following are outside the scope of this document: — applications where these standard data may be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for other tool items not described in the scope of this document; — concept of 3D models for adaptive items; — concept of 3D models for assembly items and auxiliary items.

  • Technical specification
    22 pages
    English language
    sale 15% off
  • Technical specification
    22 pages
    French language
    sale 15% off
  • Technical specification
    22 pages
    French language
    sale 15% off
ISO
ISO/TS 13399-80:2017(Main)
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles

ISO/TS 13399-80:2017 specifies the basic principles for the creation and exchange of simplified 3D models of cutting items, tool items, and adaptive items, using related properties and domains of values. Simplified 3D models contain the following: - naming and defining of the basic design features of cutting items, tool items, and adaptive items, with an association to the used properties; - naming and defining of the internal structure of the 3D model that represents the features and the properties of cutting items, tool items, and adaptive items; - naming and defining of those elements and features that are not defined in ISO/TS 13399‑50, but are necessary to design 3D models. The following are outside the scope of this document: - applications where these standard data may be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for tool items; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

  • Technical specification
    34 pages
    English language
    sale 15% off
  • Technical specification
    35 pages
    French language
    sale 15% off