ISO/TC 29/WG 34 - Cutting tool data representation and exchange

This document defines the concept of how to design tool items, limited to any kind of burrs, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of burrs. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — creation and exchange of 3D models for cutting tools; — creation and exchange of 3D models for cutting items; — creation and exchange of 3D models for other tool items not described in the scope of this document; — creation and exchange of 3D models for adaptive items; — creation and exchange of 3D models for assembly items and auxiliary items.

This document defines the concept of how to design the connection interfaces for adaptive and tool items, limited to any kind of standardized connections, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of connection interface. Not all dimensions given in this document are defined in the ISO 13399 series. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for other connection interfaces not being described in the scope of this document; — concept of 3D models for adaptive items; — concept of 3D models for assembly items and auxiliary items.

This document defines the concept of how to design adaptive items, limited to any kind of driven tool units, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of driven tool units. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for tool items; — concept of 3D models for other adaptive items not being described in the scope of this document; — concept of 3D models for assembly items and auxiliary items.

This document specifies a concept for the design of machine operated feed out tools, limited to any kind of machine operated feed out tools, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of machine operated feed out tools. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — creation and exchange of 3D for cutting tools; — creation and exchange of 3D for cutting items; — creation and exchange of 3D for tool items; — creation and exchange of 3D for other adaptive items not being described in the scope of this document; — creation and exchange of 3D for assembly items and auxiliary items.

This document specifies a concept for the design of tool items, limited to any kind drilling and countersinking tools for indexable inserts, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of drills and countersinking tools for indexable inserts. The following are outside the scope of this document: — applications where these standard data may be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for other tool items not being described in the scope of this document; — concept of 3D models for adaptive items; — concept of 3D models for assembly items and auxiliary items.

This document specifies a concept for the design of tool items, limited to any kind of cartridges for indexable inserts, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of cartridges for indexable inserts. The following are outside the scope of this document: — applications where these standard data may be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for other tool items not described in the scope of this document; — concept of 3D models for adaptive items; — concept of 3D models for assembly items and auxiliary items.

ISO/TS 13399-80:2017 specifies the basic principles for the creation and exchange of simplified 3D models of cutting items, tool items, and adaptive items, using related properties and domains of values. Simplified 3D models contain the following: - naming and defining of the basic design features of cutting items, tool items, and adaptive items, with an association to the used properties; - naming and defining of the internal structure of the 3D model that represents the features and the properties of cutting items, tool items, and adaptive items; - naming and defining of those elements and features that are not defined in ISO/TS 13399‑50, but are necessary to design 3D models. The following are outside the scope of this document: - applications where these standard data may be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for tool items; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

ISO/TS 13399-310:2017 carbide tips, together with the usage of the related properties and domains of values. ISO/TS 13399-310:2017 carbide tips, together with the usage of the related properties and domains of specifies a common way of designing simplified models that contain the following: - definitions and identifications of the design features of turning tools with carbide tips, with a link to the properties used; - definitions and identifications of the internal structure of the 3D model that represents features and properties of turning tools with carbide tips. The following are outside the scope of this document: - applications where these standard data can be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for cutting items; - creation and exchange of simplified 3D models for other tool items not being described in the scope of this document; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

ISO/TS 13399-305:2017 specifies a concept for the design of tool items, for all kinds of modular tooling systems with adjustable cartridges for boring, together with the usage of the related properties and domains of values. ISO/TS 13399-305:2017 specifies a common way of designing simplified models that contain the following: - definitions and identifications of the design features of modular tooling systems with adjustable cartridges for boring, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of modular tooling systems with adjustable cartridges for boring. The following are outside the scope of this document: a) applications where these standard data may be stored or referenced; b) concept of 3D models for cutting tools; c) concept of 3D models for cutting items; d) concept of 3D models for other tool items not being described in the scope of this document; e) concept of 3D models for adaptive items; f) concept of 3D models for assembly items and auxiliary items.

ISO/TS 13399-405:2016 specifies a concept for the design of adaptive items, limited to any kind of collets, clamping sleeves and ferrules, together with the usage of the related properties and domains of values. ISO/TS 13399-405:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of collets, clamping sleeves, and ferrules, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of collets, clamping sleeves, and ferrules. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for tool items; - concept of 3D models for other adaptive items not being described in the scope of this part of ISO 13399; - concept of 3D models for assembly items and auxiliary items.

ISO/TS 13399-309:2016 specifies a concept for the design of turning tools for indexable inserts, together with the usage of the related properties and domains of values. ISO/TS 13399-309:2016 specifies a common way of designing simplified models that contain the following: - definitions and identifications of the design features of turning tools for indexable inserts, with an association to the descriptive properties and dimensions; - definition and identification of the 3D model internal structure that represents the features and the properties of turning tools for indexable inserts. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

ISO/TS 13399-311:2016 specifies a concept for the design of tool items, for all kinds of solid reamers, together with the usage of the related properties and domains of values. ISO/TS 13399-311:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of solid reamers, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of solid reamers. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

ISO/TS 13399-401:2016 specifies a concept for the design of adaptive items, limited to any kind of converters, extenders and reducers, together with the usage of the related properties and domains of values. ISO/TS 13399-401:2016 specifies a common way of designing simplified models that contain the following: - definitions and identifications of the design features of converting, extending and reducing adaptors, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of converting, extending and reducing adaptors. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for tool items; - concept of 3D models for other adaptive items not described in the scope of this part of ISO/TS 13399; - concept of 3D models for assembly items and auxiliary items.

ISO/TS 13399-312:2016 specifies a concept for the design of tool items, limited to any kind of reamers for indexable cutting edges, together with the usage of the related properties and domains of values. ISO/TS 13399-312:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of reamers for indexable cutting edges, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represent the features and the properties of reamers for indexable cutting edges. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

ISO/TS 13399-307:2016 specifies a concept for the design of tool items, limited to any kind end mills for indexable inserts, together with the usage of the related properties and domains of values. ISO/TS 13399-307:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of end mills for indexable inserts, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of end mills for indexable inserts. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this International Standard; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

ISO/TS 13399-204:2016 specifies a concept for the design of cutting items, limited to any kind of replaceable inserts for reaming, using related properties and domains of values. ISO/TS 13399-204:2016 specifies a common way of designing simplified models that contain the following: - definitions and identification of the design features of replaceable inserts for reaming, with a link to the properties used; - definitions and identification of the internal structure of the 3D model that represents the features and the properties of replaceable inserts for reaming; The following are outside the scope of this part of ISO 13399: - applications where these standard data may be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for tool items; - creation and exchange of simplified 3D models for other cutting items not described in this part of ISO 13399; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

ISO/TS 13399-303:2016 specifies a concept for the design of tool items, limited to solid (non-indexable) end mills, with the usage of the related properties and domains of values. ISO/TS 13399-303:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of solid (non-indexable) end mills, with a link to the properties used; - definitions and identifications of the internal structure of the 3D model that represents features and properties of solid (non-indexable) end mills. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for cutting items; - creation and exchange of simplified 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

ISO/TS 13399-304:2016 specifies a concept for the design of tool items, limited to any kind of milling cutters with arbor hole and non-indexable cutting edges, together with the usage of the related properties and domains of values. ISO/TS 13399-304:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of milling cutters with arbor hole and non-indexable cutting edges, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of milling cutters with arbor hole and non-indexable cutting edges. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

ISO/TS 13399-308:2016 specifies a concept for the design of tool items, limited to any kind of milling cutters with arbor hole for indexable inserts, together with the usage of the related properties and domains of values. ISO/TS 13399-308:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of milling cutters with arbor hole for indexable inserts, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of milling cutters with arbor hole for indexable inserts. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

ISO 13399-203:2015 specifies a concept for the design of cutting items, limited to any kind of replaceable inserts for drilling, using related properties and domains of values. ISO 13399-203:2015 specifies a common way of designing simplified models that contain the following: - definitions and identification of the design features of replaceable inserts for drilling, with a link to the properties used; - definitions and identification of the internal structure of the 3D model that represents the features and properties of replaceable inserts for drilling; The following are outside the scope of ISO 13399-203:2015: - applications where these standard data may be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for tool items; - creation and exchange of simplified 3D models for other cutting items not described in this part of ISO 13399; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

ISO/TS 13399-202:2015 specifies a concept for the design of cutting items, limited to any kind of irregular inserts, with the usage of the related properties and domains of values. It specifies a common way of designing simplified models that contain the following: - definitions and identification of the design features of irregular inserts, with a link to the properties used; - definitions and identification of the internal structure of the 3D model that represents the features and the properties of irregular inserts. The following are outside the scope of this part of ISO 13399: - applications where these standard data may be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for tool items; - creation and exchange of simplified 3D models for other cutting items not described in this part of ISO 13399; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

ISO 13399-201:2014 specifies a concept for the design of cutting items, limited to regular inserts, with the usage of the related properties and domains of values. It specifies a common way of designing simplified models that contain definitions and identification of the design features of regular inserts, with a link to the properties used, and definitions and identification of the internal structure of the 3D model that represents features and properties of regular inserts. Outside the scope of ISO 13399-201:2014 are applications where these standard data can be stored or referenced, and the creation and exchange of simplified 3D models for cutting tools, or for tool items, other cutting items not described, adaptive items or for assembly and auxiliary items.

ISO/TS 13399-60:2014 specifies a reference dictionary for connection systems for cutting tools, together with their descriptive properties and domains of values, and the structure of interface codes containing definitions and identifications of the classes of connection systems, with an associated classification scheme, definitions and identifications of the data element types that represent the properties of connection systems, definitions and identifications of domains of values for describing those data element types, definitions and structure of the value entry of the properties of interface codes that are defined, and rules for the structure of these properties to be able to communicate between systems.

ISO/TS 13399-3:2014 specifies a reference dictionary for tool items, together with their descriptive properties and domains of values, containing definitions and identifications of the classes of tool items and their features, with an associated classification scheme, definitions and identifications of the data element types that represents the properties of tool items and their features, and definitions and identifications of domains of values for describing those data element types.

ISO/TS 13399-5:2014 specifies a reference dictionary for items used to assemble cutting tools, together with their descriptive properties and domains of values, containing definitions and identifications of the classes of assembly items, with an associated classification scheme, definitions and identifications of the data element types that represents the properties of assembly items, and definitions and identifications of domains of values for describing those data element types.

ISO/TS 13399-2:2014 specifies a reference dictionary for cutting items, together with their descriptive properties and domains of values, containing definitions and identifications of the classes of cutting items and their features, with an associated classification scheme, definitions and identifications of the data element types that represent the properties of cutting items and their features, and definitions and identifications of domains of values for describing those data element types.

ISO/TS 13399-4:2014 specifies a reference dictionary for adaptive items, together with their descriptive properties and domains of values, containing definitions and identifications of the classes of adaptive items, with an associated classification scheme, definitions and identifications of the data element types that represents the properties of adaptive items, and definitions and identifications of domains of values for describing those data element types.

ISO 13399-50:2013 specifies a reference dictionary for reference systems for cutting tools, together with their descriptive properties and domains of values. ISO 13399-50:2013 specifies a reference dictionary containing: definitions and identifications of the classes of reference systems for cutting tools, with an associated classification scheme; definitions and identifications of the data element types that represent the properties of reference systems for cutting tools; definitions and identifications of domains of values for describing the above-mentioned data element types. The following are within the scope of ISO 13399-50:2013: standard data that represent the various classes of connection systems for cutting tools; standard data that represent the various properties of connection systems for cutting tools; standard data that represent domains of values used for properties of connection systems for cutting tools; standard data that represent the various classes of reference systems for cutting tools; standard data that represent the various properties of reference systems for cutting tools; standard data that represent domains of values used for properties of reference systems for cutting tools; one implementation method by which the standard data defined in ISO 13399-50:2013 can be exchanged (ISO 10303-21).

ISO/TS 13399-302:2013 specifies a concept for the design of tool items, limited to any kind of drilling and countersinking tools with solid cutting edges, together with the usage of the related properties and domains of values. ISO/TS 13399-302:2013 specifies a common way of designing simplified models that contain: definitions and identifications of the design features of drills and countersinking tools with solid cutting edges, with a link to the properties used; definitions and identifications of the internal structure of the 3D model that represents the features and properties of drills and countersinking tools with solid cutting edges.

ISO/TS 13399-301:2013 specifies a concept for the design of tool items, limited to any kind of taps and dies, together with the usage of the related properties and domains of values. ISO/TS 13399-301:2013 specifies a common way of designing simplified models that contain: definitions and identifications of the design features of thread-cutting taps, thread-forming taps and thread-cutting dies with solid cutting edges, with a link to the properties used; definitions and identifications of the internal structure of the 3D model that represents the features and properties of thread-cutting taps, thread-forming taps and thread-cutting dies with solid cutting edges.

ISO/TS 13399-100:2008 defines the principles and methods for creating unambiguous identifications and definitions of the items and their properties relating to cutting tools in computer-sensible dictionaries to be used for reference by the information model defined in ISO 13399-1. It is applicable to: the specification of data element types, their identifying, semantic and value attributes; the specification of item classes, their identifying and semantic attributes; the specification of feature classes, their identifying and semantic attributes. It is not applicable to: information model for cutting tools; classifications and definitions of items and data element types relating to cutting tools; the association between properties and items in a classification.

ISO/TS 13399-150:2008 gives guidelines for the application of ISO 13399 as a whole, including guidance on the instantiation of the EXPRESS schema as described in ISO 13399-1, and the use of the reference data described in ISO/TS 13399-2, ISO/TS 13399-3, ISO/TS 13399-4, ISO/TS 13399-5, ISO/TS 13399-50 and ISO/TS 13399-60. ISO/TS 13399-150:2008 does not define the terms and properties for cutting items, tool items, adaptive items assembly items, reference systems or common features and connection systems.

ISO 13399-1:2006 covers the main categories of cutting tool data and the relationships between them. It provides a general information model of data representation and information exchange for these categories, as well as an overview of the principles of product data exchange used in ISO 13399 as a whole, a description of the other parts of ISO 13399 and a method for transferring cutting tool data.

ISO 13399-80:2014 specifies the basic principles for the creation and exchange of simplified 3D models of cutting items, tool items, and adaptive items, using related properties and domains of values. Simplified 3D models contain the following: naming and defining of the basic design features of cutting items, tool items, and adaptive items, with an association to the used properties; naming and defining of the internal structure of the 3D model that represents the features and the properties of cutting items, tool items, and adaptive items; naming and defining of those elements and features that are not defined in ISO/TS 13399‑50, but are necessary to design 3D models. The following are outside the scope of ISO 13399-80:2014: applications where these standard data may be stored or referenced; creation and exchange of simplified 3D models for cutting tools; creation and exchange of simplified 3D models for tool items; creation and exchange of simplified 3D models for adaptive items; creation and exchange of simplified 3D models for assembly items and auxiliary items.

ISO/TS 13399-5:2007 specifies a reference dictionary for assembly items for cutting tools, together with their descriptive properties and domains of values. It specifies a reference dictionary that contains definitions and identifications of the classes of assembly items, with an associated classification scheme, definitions and identifications of the data element types that represent the properties of assembly items, and definitions and identifications of domains of values for describing the above data element types. The following is within the scope of ISO/TS 13399-5:2007: standard data that represent the various classes of assembly items; standard data that represent the various properties of assembly items; standard data that represent domains of values used for properties of assembly items; a single implementation method by which the standard data defined in ISO/TS 13399-5:2007 can be exchanged (see ISO 10303-21). The following is not within its scope: specialized or expert knowledge on the design and use of cutting tools; rules used to determine the information that should be communicated; applications where these standard data may be stored or referenced; implementation methods other than the one defined in ISO/TS 13399-5:2007 by which the standard data can be exchanged and referenced; information models for cutting tools; definitions of classes and properties for cutting items, tool items, adaptive items, reference systems and common concepts, or for connection systems, these being covered by other parts of ISO 13399; definitions of items for general engineering use that may be specified by other organizations and included in other dictionaries approved by ISO.

ISO/TS 13399-50:2007 specifies a reference dictionary for reference systems and common concepts for cutting tools, together with their descriptive properties and domains of values. The reference dictionary contains definitions and identifications of the classes of reference systems and common concepts for cutting tools, with an associated classification scheme, definitions and identifications of the data element types that represent the properties of reference systems and common concepts for cutting tools, and definitions and identifications of domains of values for describing the above data element types. The following is within the scope of ISO/TS 13399-50:2007: standard data that represent the various classes of reference systems and common concepts for cutting tools; standard data that represent the various properties of reference systems and common concepts for cutting tools; standard data that represent domains of values used for properties of reference systems and common concepts for cutting tools; a single implementation method by which the standard data defined in ISO/TS 13399-50:2007 can be exchanged (see ISO 10303-21). The following is not within its scope: specialized or expert knowledge on the design and use of cutting tools; rules used to determine the information that should be communicated; applications where these standard data may be stored or referenced; implementation methods other that the one defined in ISO/TS 13399-50:2007 by which the standard data can be exchanged and referenced; information models for cutting tools; definitions of classes and properties for cutting items, tool items, assembly items, adaptive items, or for connection systems, these being covered by other parts of ISO 13399.

ISO 13399-3:2007 specifies a reference dictionary for tool items, together with their descriptive properties and domains of values. It specifies a reference dictionary that contains definitions and identifications of the classes of tool items and their features, with an associated classification scheme, definitions and identifications of the data element types that represent the properties of tool items and their features, and definitions and identifications of domains of values for describing the above data element types. The following is within the scope of ISO 13399-3:2007: standard data that represent the various classes of tool items and tool item features; standard data that represent the various properties of tool items and tool item features; standard data that represent domains of values used for properties of tool items and tool item features; a single implementation method by which the standard data defined in ISO 13399-3:2007 can be exchanged (see ISO 10303-21). The following is not within its scope: specialized or expert knowledge on the design and use of cutting tools; rules used to determine the information that should be communicated; applications where these standard data may be stored or referenced; implementation methods other that the one defined in ISO 13399-3:2007 by which the standard data can be exchanged and referenced; information models for cutting tools; definitions of classes and properties for cutting items, adaptive items, assembly items, reference systems and common concepts, or for connection systems, these being covered by other parts of ISO 13399.

ISO/TS 13399-4:2007 specifies a reference dictionary for adaptive items, together with their descriptive properties and domains of values. The reference dictionary contains definitions and identifications of the classes of adaptive items, with an associated classification scheme, definitions and identifications of the data element types that represent the properties of adaptive items, and definitions and identifications of domains of values for describing the above data element types. The following is within the scope of ISO/TS 13399-4:2007: standard data that represent the various classes of adaptive items; standard data that represent the various properties of adaptive items; standard data that represent domains of values used for properties of adaptive items; a single implementation method by which the standard data defined in ISO/TS 13399-4:2007 can be exchanged (see ISO 10303-21). The following is not within its scope: specialized or expert knowledge on the design and use of cutting tools; rules used to determine the information that should be communicated; applications where these standard data may be stored or referenced; implementation methods other that the one defined in ISO/TS 13399-4:2007 by which the standard data can be exchanged and referenced; information models for cutting tools; definitions of classes and properties for cutting items, tool items, assembly items, reference systems and common concepts, or for connection systems, these being covered by other parts of ISO 13399.

ISO/TS 13399-60:2007 specifies a reference dictionary for connection systems for cutting tools, together with their descriptive properties and domains of values. The reference dictionary contains definitions and identifications of the classes of connection systems for cutting tools, with an associated classification scheme, definitions and identifications of the data element types that represent the properties of connection systems for cutting tools, and definitions and identifications of domains of values for describing the above data element types. The following is within the scope of ISO/TS 13399-60:2007: standard data that represent the various classes of connection systems for cutting tools; standard data that represent the various properties connection systems for cutting tools; standard data that represent domains of values used for properties of connection systems for cutting tools; a single implementation method by which the standard data defined in ISO/TS 13399-60:2007 can be exchanged (see ISO 10303-21). The following is not within its scope: specialized or expert knowledge on the design and use of cutting tools; rules used to determine the information that should be communicated; applications where these standard data may be stored or referenced; implementation methods other that the one defined in ISO/TS 13399-60:2007 by which the standard data can be exchanged and referenced; information models for cutting tools; definitions of classes and properties for cutting items, tool items, assembly items, adaptive items, or for reference systems and common concepts, these being covered by other parts of ISO 13399.

ISO/TS 13399-2:2005 specifies a reference dictionary for cutting items, together with their descriptive properties and domains of values, for use in cutting tool data representation. The reference dictionary contains definitions and identifications of the classes of cutting items and their features, together with an associated classification scheme, definitions and identifications of the data element types that represent the properties of cutting items and their features, and definitions and identifications of domains of values for describing those data element types. It is applicable to standard data that represent the various classes of cutting items and cutting item features, standard data that represent the various properties of cutting items and cutting item features, standard data that represent domains of values used for properties of cutting items and cutting item features, definitions of reference systems for cutting items and their properties, and an implementation method by which the standard data defined in this Technical Specification may be exchanged, specified in ISO 10303-21. It is not applicable to applications where these standard data may be stored or referenced, implementation methods other than the one defined in this Technical Specification by which the standard data may be exchanged and referenced, information model for cutting tools, definitions of classes and properties for tool items, definitions of classes and properties for adaptive items, or definitions of classes and properties for assembly items and auxiliary items.

ISO/TS 13399-100:2004 defines the principles and methods for creating unambiguous definitions of the items and their properties that relate to cutting tools in computer-sensible dictionaries that are to be used for reference by the information model defined in ISO 13399-1. The following are within the scope of this Technical Specification: the specification of data element types, their identifying, semantic and value attributes; the specification of item classes, their identifying and semantic attributes; The following are not within the scope of this Technical Specification: information model for cutting tools; classifications and definitions of items and data element types relating to cutting tools; association between properties and items in a classification.