iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 16145-4:2013

(Main)

Ships and marine technology — Protective coatings and inspection method — Part 4: Automated measuring method for the total amount of water-soluble salts

Ships and marine technology — Protective coatings and inspection method — Part 4: Automated measuring method for the total amount of water-soluble salts

ISO 16145-4:2013 describes the characteristics of an automated measuring method by using a conductivity meter for the assessment of the total surface density of various water-soluble salts on steel surfaces prior to coating applications for dedicated sea water ballast tanks, void spaces of bulk carriers and oil tankers, and cargo oil tanks of crude tankers in compliance with PSPC stipulated by IMO Res.MSC.215(82), IMO Res.MSC.244(83), and IMO Res.MSC.288(87). This method describes a procedure for rapid evaluation of the surface of steel for the presence of ionic contamination by determining the total concentration of water-soluble ionic contaminants by means of a conductivity test.

Navires et technologie maritime — Revêtements de protection et méthode d'inspection — Partie 4: Méthode de mesure automatisée de la quantité totale de sels solubles dans l'eau

General Information

Status
Published
Publication Date
14-Jan-2013
ICS
47.020.99 - Other standards related to shipbuilding and marine structures
Technical Committee
ISO/TC 8/SC 8 - Ship design
Drafting Committee
ISO/TC 8/SC 8 - Ship design
Current Stage
9093 - International Standard confirmed
Completion Date
06-Dec-2023
Ref Project

Buy Standard

ISO 16145-4:2013 - Ships and marine technology -- Protective coatings and inspection methodISO 16145-4:2013 - Ships and marine technology -- Protective coatings and inspection method
PreviousNext
Standard
ISO 16145-4:2013 - Ships and marine technology -- Protective coatings and inspection method
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 16145-4
First edition
2013-02-01
Ships and marine technology —
Protective coatings and inspection
method —
Part 4:
Automated measuring method for the
total amount of water-soluble salts
Navires et technologie maritime — Revêtements de protection et
méthode d’inspection —
Partie 4: Méthode de mesure automatisée de la quantité totale de sels
solubles dans l’eau
Reference number
ISO 16145-4:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 16145-4:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 16145-4:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle of measurement . 2
5 General requirements . 2
5.1 Standard solutions . 2
5.2 Composition of detector . 2
5.3 Conductivity meter . 2
5.4 Water . 2
6 Measurement procedure . 2
6.1 General . 2
6.2 Blank test . 3
6.3 General requirements of extraction of salts from the steel surface . 3
6.4 Conductivity measurement . 3
6.5 Cleaning of the detector . 3
7 Expression of results . 3
7.1 Measurement with direct reading from instrument .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 16145-5:2014(Main)
Ships and marine technology — Protective coatings and inspection method — Part 5: Assessment method for coating damages

ISO 16145-5:2014 specifies a method for the assessment of coating damages of ballast tanks, as well as cargo oil tanks where IMO PSPC shall be applied, and it can also be applied to other areas as a reference.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO 17682:2013(Main)
Ships and marine technology — Methodology for ship launching utilizing air bags

ISO 17682:2013 specifies general guidelines for ship launching utilizing air bags, including the specification of the ship and facilities such as air bags, slipway, towing arrangements, the launching procedure, and safeguards during the ship launching. ISO 17682:2013 is applicable to ships meeting specified requirements and utilizing air bags for launching.

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 16145-3:2012(Main)
Ships and marine technology — Protective coatings and inspection method — Part 3: Cargo oil tanks of crude oil tankers

This part of ISO 16145 specifies a method of protective coatings and its inspection of cargo oil tanks for crude oil tankers of not less than 5 000 tones deadweight, which are contracted for new building on or after 1 January 2013; or in the absence of a building contract, the keels of which are laid or which are at a similar stage of construction on or after 1 July 2013; or the delivery of which is on or after 1 January 2016. NOTE A crude oil tanker is an oil tanker engaged in the trade of carrying crude oil. This part of ISO 16145 applies to crude oil tankers and crude oil/product carriers as defined in items 1.11.1 or 1.11.4 of the Supplement to the International Oil Pollution Prevention Certificate (Form B).

  • Standard
    40 pages
    English language
    sale 15% off
ISO
ISO 16145-2:2012(Main)
Ships and marine technology — Protective coatings and inspection method — Part 2: Void spaces of bulk carriers and oil tankers

This part of ISO 16145 specifies a method of protective coatings and its inspection of void spaces of bulk carriers and oil tankers which are contracted and agreed to apply PSPC/VOID [IMO Res.MSC.244 (83)] for new building on or after 5 October 2007.

  • Standard
    38 pages
    English language
    sale 15% off
ISO
ISO 16145-1:2012(Main)
Ships and marine technology — Protective coatings and inspection method — Part 1: Dedicated sea water ballast tanks

This part of ISO 16145 specifies a method of protective coatings and its inspection for dedicated seawater ballast tanks. It is applicable to all types of ships of not less than 500 gross tonnage and double-side skin spaces of bulk carriers of 150 m in length and upwards, which are contracted for new building on or after 1 July 2008; or in the absence of a building contract, the keels of which are laid or which are at a similar stage of construction on or after 1 January 2009; or the delivery of which is on or after 1 July 2012. This part of ISO 16145 also is applicable to the dedicated seawater ballast tanks of oil tankers of double hull construction of 150 m in length and upwards and double-side skin spaces of bulk carriers of 90 m in length and upwards, which are contracted for new building on or after 8 December 2006. NOTE Double-side skin space is a configuration where each ship side is constructed by the side shell with a longitudinal bulkhead connecting to the double bottom and the deck. Hopper side tanks and top-side tanks may, where fitted, be integral parts of the double-side skin configuration. Therefore, the void spaces or other designated tanks arranged as a part of top-side tank, when provided in the bulk carriers of single-side skin construction, need not be considered as a double-side skin space

  • Standard
    40 pages
    English language
    sale 15% off
ISO
ISO 14409:2011(Main)
Ships and marine technology — Ship launching air bags

ISO 14409:2011 specifies the terms and definitions, classification, materials and dimensions, test items and methods for air bags to be used for launching a vessel. It also specifies issues such as marking, documentation, packaging, transport, storage and so on. ISO 14409:2011 is intended for designing, manufacturing, testing and accepting air bags that are made of synthetic-tire-cord reinforcement layers.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off
  • Standard
    12 pages
    Russian language
    sale 15% off
ISO
ISO 16155:2006(Main)
Ships and marine technology — Computer applications — Shipboard loading instruments

ISO 16155:2006 is applicable where computer equipment is used to perform functions related to loading and associated ship safety issues, such as, but not limited to, intact and damaged stability and longitudinal strength. ISO 16155:2006 defines requirements on a shipboard loading instrument that are supplementary to IMO MSC/Circ. 836, IMO MSC/Circ. 854, IMO MSC/Circ. 891 and IACS Recommendation No. 48.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    12 pages
    Russian language
    sale 15% off
ISO
ISO 17894:2005(Main)
Ships and marine technology — Computer applications — General principles for the development and use of programmable electronic systems in marine applications

ISO 17894:2005 provides a set of mandatory principles, recommended criteria and associated guidance for the development and use of dependable marine programmable electronic systems for shipboard use. It applies to any shipboard equipment containing programmable elements which may affect the safe or efficient operation of the ship. It contains information for all parties involved in the specification, operation, maintenance and assessment of such systems. The principles and guidance in the document are largely based on requirements in national and international standards. The source standards and their contribution to this International Standard are presented in the bibliography.

  • Standard
    64 pages
    English language
    sale 15% off
ISO
ISO 22804:2023(Main)
Marine technology — General technical requirement of marine conductivity-temperature-depth (CTD) measuring instrument

This document specifies the technical requirements to ensure consistent reporting on the test method, inspection rules, marks, packaging, transportation and storage of conductivity-temperature-depth (CTD) profilers. This document is applicable to marine fixed-point and mobile observation, monitoring platform and the various types of shipborne CTD measuring instruments. NOTE A CTD directly measures conductivity, temperature, pressure of seawater. Depth is the conversion of pressure according to the Formula (C.1).

  • Standard
    20 pages
    English language
    sale 15% off
ISO
ISO 3725:2023(Main)
Ships and marine technology — Aquatic nuisance species — Methods for evaluating the performance of compliance monitoring devices for ballast water discharges

This document specifies methods to evaluate the performance of a specific class of analytical instruments, known as compliance monitoring devices (CMDs). These instruments are designed and intended to examine ballast water to determine whether a sample meets or exceeds limits for the concentration of living or viable organisms. These limits include those specified by the International Maritime Organization (IMO) Regulation D-2 in the International Convention for the Control and Management of Ships' Ballast Water and Sediments[4] or other discharge standards (DS) adopted by national or regional authorities. The test methods measure the agreement between the CMD and a reference method to calculate trueness and precision. Both trueness and precision consider only simple, categorical outcomes (e.g. “meets” or “exceeds” the DS). The performance metric reliability is quantified by the frequency of instances when the CMD is not available or is not operating as expected. The set of tests and trials is based upon the CMD manufacturer claims, such as the DS group(s) targeted by the CMD, and known limitations, including those based upon the salinity of the sample water. NOTE Additional tests and trials, if required by the end-user, can follow this general test method. Guidance on determining experimental power is found in 7.5. This document provides guidance for customizing the tests to evaluate the claims of the manufacturer or to address optional factors of interest to the end-users. This document does not set or recommend success criteria of any performance metric, as these are appropriately defined by the end-users.

  • Standard
    28 pages
    English language
    sale 15% off
  • Draft
    26 pages
    English language
    sale 15% off