iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 4954-2:2024

(Main)

Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels

Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels

This document specifies requirements for stainless steels that are intended for cold heading or cold extruding and are delivered as wire rods, wire or bars. It lists specific requirements for steels with diameters of 0,8 mm up to 50 mm for austenitic steels, up to 25 mm for ferritic steels and up to 100 mm for martensitic steels. This document is applicable to the properties of cold-headed or cold-extruded parts which have been subjected to a subsequent heat treatment. NOTE Non-alloy and alloy steels for cold heading and cold extruding are covered by ISO 4954-1.

Aciers pour transformation à froid et extrusion à froid — Conditions techniques de livraison — Partie 2: Aciers inoxydables

General Information

Status
Published
Publication Date
18-Jun-2024
ICS
77.140.10 - Heat-treatable steels
77.140.20 - Stainless steels
Technical Committee
ISO/TC 17/SC 4 - Heat treatable and alloy steels
Drafting Committee
ISO/TC 17/SC 4 - Heat treatable and alloy steels
Current Stage
6060 - International Standard published
Start Date
19-Jun-2024
Due Date
20-Mar-2026
Completion Date
19-Jun-2024
Ref Project

Relations

Revises
ISO 4954:2022 - Steels for cold heading and cold extruding
Effective Date
24-Dec-2022

Buy Standard

ISO 4954-2:2024 - Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels Released:19. 06. 2024ISO 4954-2:2024 - Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels Released:19. 06. 2024
PreviousNext
Standard
ISO 4954-2:2024 - Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels Released:19. 06. 2024
English language
22 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/FDIS 4954-2 - Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels Released:19. 03. 2024ISO/FDIS 4954-2 - Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels Released:19. 03. 2024
PreviousNext
Draft
ISO/FDIS 4954-2 - Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels Released:19. 03. 2024
English language
22 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/FDIS 4954-2 - Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels Released:19. 03. 2024REDLINE ISO/FDIS 4954-2 - Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels Released:19. 03. 2024
PreviousNext
Draft
REDLINE ISO/FDIS 4954-2 - Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels Released:19. 03. 2024
English language
22 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International
Standard
ISO 4954-2
First edition
Steels for cold heading and cold
2024-06
extruding — Technical delivery
conditions —
Part 2:
Stainless steels
Aciers pour transformation à froid et extrusion à froid —
Conditions techniques de livraison —
Partie 2: Aciers inoxydables
Reference number
ISO 4954-2:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 4954-2:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 4954-2:2024(en)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification and designation . 2
4.1 Classification .2
4.2 Designation .3
5 Information to be supplied by the purchaser . 3
5.1 Mandatory information .3
5.2 Options and/or supplementary or special requirements .3
5.3 Ordering example.4
6 Manufacturing process . 4
6.1 General .4
6.2 Deoxidation.4
6.3 Heat-treatment condition and surface condition at delivery .4
6.3.1 Heat-treatment condition .4
6.3.2 Particular surface conditions .4
6.4 Traceability of the cast .4
6.5 Statistical evaluation .
...

FINAL DRAFT
International
Standard
ISO/FDIS 4954-2
ISO/TC 17/SC 4
Steels for cold heading and cold
Secretariat: DIN
extruding — Technical delivery
Voting begins on:
conditions —
2024-04-02
Part 2:
Voting terminates on:
2024-05-28
Stainless steels
Aciers pour transformation à froid et extrusion à froid —
Conditions techniques de livraison —
Partie 2: Aciers inoxydables
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 4954-2:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 4954-2:2024(en)
International
Standard
ISO/FDIS 4954-2
ISO/TC 17/SC 4
Steels for cold heading and cold
Secretariat: DIN
extruding — Technical delivery
Voting begins on:
conditions —
Part 2:
Voting terminates on:
Stainless steels
Aciers pour transformation à froid et extrusion à froid —
Conditions techniques de livraison —
Partie 2: Aciers inoxydables
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 4954-2:2024(en) © ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/FDIS 4954-2:2024(en)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification and designation . 2
4.1 Classification .2
4.2 Designation .3
5 Information to be supplied by the purchaser . 3
5.1 Mandatory information .3
5.2 Options and/or supplementary or special requirements .3
5.3 Ordering example.
...

ISO/TC 17/SC 4
Style Definition
...
Formatted: Left: 1.5 cm, Top: 1.4 cm, Bottom: 1 cm,
Date: 2024-01
Gutter: 0 cm, Header distance from edge: 1.27 cm,
Footer distance from edge: 1.27 cm
ISO/FDIS 4954-2:2024(E) Formatted: Font: 14 pt, Bold, French (Switzerland)
Formatted: zzCover large, Adjust space between Latin
ISO/TC 17/SC 4
and Asian text, Adjust space between Asian text and
numbers
Secretariat: DIN
Formatted: French (Switzerland)
Formatted: Space After: 0 pt, Adjust space between
Date: 2024-03-18
Latin and Asian text, Adjust space between Asian text
and numbers
Steels for cold heading and cold extruding — Technical delivery
conditions — —
Formatted: Regular, Font: 16 pt, Bold, French
Part 2:
(Switzerland)
Stainless steels
Formatted: Cover Title_A2, Adjust space between Latin
and Asian text, Adjust space between Asian text and
Aciers pour transformation à froid et extrusion à froid — Conditions techniques de livraison — — numbers
Formatted
...
Partie 2 : Aciers inoxydables
Formatted
...
Formatted: French (France)
Formatted: Cover Title_B, Adjust space between Latin
and Asian text, Adjust space between Asian text and
numbers
Formatted
...
FDIS stage

---------------------- Page: 1 ----------------------
ISO/FDIS 4954-2:2024(Een) Formatted: Font: 11 pt
Formatted: HeaderCentered, Space After: 0 pt, Line
spacing: single
Formatted: Font: 11 pt
© ISO 20232024
Formatted: French (Switzerland)
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
Formatted: Default Paragraph Font, French
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
Formatted: French (Switzerland)
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
Formatted: French (Switzerland)
at the address below or ISO'sISO’s member body in the country of the requester.
ISO Copyright Officecopyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Formatted: zzCopyright address, Adjust space between
Phone: + 41 22 749 01 11 Latin and Asian text, Adjust space between Asian text
and numbers
Email: copyright@iso.org
Formatted: French (Switzerland)
E-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Formatted: zzCopyright address, Adjust space between
Latin and Asian text, Adjust space between Asian text
and numbers
Published in Switzerland.
Formatted: FooterPageRomanNumber
ii © ISO 2023 – All rights reserved
© ISO 2024 – All rights reserved

ii

---------------------- Page: 2 ----------------------
ISO/FDIS 4954-2:2024(Een) Formatted: HeaderCentered, Left, Space After: 0 pt, Line
spacing: single
Formatted: Font: 11 pt
Formatted: Font: 11 pt
Contents Page
Foreword . vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification and designation . 3
4.1 Classification . 3
4.2 Designation . 3
5 Information to be supplied by the purchaser . 3
5.1 Mandatory information . 3
5.2 Options and/or supplementary or special requirements . 4
5.3 Ordering example . 4
6 Manufacturing process.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 4954-1:2024(Main)
Steels for cold heading and cold extruding — Technical delivery conditions — Part 1: Non-alloy and alloy steels

This document specifies requirements for non-alloy and alloy steels that are intended for cold heading or cold extruding and are delivered as wire rods, wire or bars. It also lists the specific requirements for: — steels not intended for heat treatment, with diameters from 2 mm to 100 mm (see Annex A); — case-hardening steels with diameters from 2 mm to 100 mm (see Annex B); — steels for quenching and tempering, including boron-alloyed steels, with diameters from 2 mm to 100 mm (see Annex C). This document (except Annex A) also applies to the properties of cold-headed or cold-extruded parts which have been subjected to a subsequent heat treatment. NOTE Stainless steels for cold heading and cold extruding are covered by ISO 4954-2.

  • Standard
    56 pages
    English language
    sale 15% off
  • Draft
    56 pages
    English language
    sale 15% off
  • Draft
    56 pages
    English language
    sale 15% off
ISO
ISO 683-7:2023(Main)
Heat-treatable steels, alloy steels and free-cutting steels — Part 7: Bright products of non-alloy and alloy steels

This document specifies the technical delivery requirements for bright steel products in the drawn, peeled/turned or additional ground condition and they are intended for mechanical purposes, for example for machine parts. The bright steel products are subdivided into the following steel types: a) non-alloy general engineering steels; b) non-alloy free-cutting steels; c) non-alloy and alloy case-hardening steels; d) non-alloy and alloy steels for quenching and tempering. Bright products of stainless steels are not part of this document, they are covered by ISO 16143-4.

  • Standard
    55 pages
    English language
    sale 15% off
ISO
ISO 683-6:2023(Main)
Heat-treatable steels, alloy steels and free-cutting steels — Part 6: Hot-rolled steels for quenched and tempered springs

This document specifies the technical delivery requirements for round and flat bars and wire rods manufactured from the alloyed steels listed in Table 4, intended for hot-formed and subsequently heat-treated springs or cold-formed and subsequently heat-treated springs. The products are supplied in one of the heat-treatment conditions given for the different types of products in Table 2 and in one of the surface conditions given in Table 3. NOTE 1 Table 4 only considers steels that have gained certain international importance. This does, however, not mean that these are available in all industrial countries. In addition, a great number of other steels are specified in regional and national standards. NOTE 2 Non-alloy steels also for the production of springs are covered by the wire rod specification in ISO 16120-4. NOTE 3 International Standards relating to steels conforming with the chemical composition requirements in Table 4, but supplied in other product forms or other treatment conditions or intended for special applications, are given in the bibliography.

  • Standard
    28 pages
    English language
    sale 15% off
ISO
ISO 4954:2022(Main)
Steels for cold heading and cold extruding

This document specifies requirements for non-alloy and alloy steels that are intended for cold heading or cold extruding and are delivered as wire rods, wire or bars. It also contains specific requirements for: — steels not intended for heat treatment, with diameters from 2 mm to 100 mm (see Annex A); — case-hardening steels with diameters from 2 mm to 100 mm (see Annex B); — steels for quenching and tempering, including boron-alloyed steels (see Table C.3), with diameters from 2 mm to 100 mm (see Annex C); — stainless steels with diameters of 0,8 mm up to 50 mm for austenitic steels, up to 25 mm for ferritic steels and up to 100 mm for martensitic steels (see Annex D). This document (except Annex A) is applicable to the properties of cold-headed or cold-extruded parts which have been subjected to a subsequent heat treatment. As the properties of the parts in the cold-headed or cold-extruded, and subsequently not-heat-treated condition, are largely dependent on the applied cold-heading or cold-extruding conditions, these are, if necessary, subject to agreement between the purchaser and the manufacturer of the parts.

  • Standard
    67 pages
    English language
    sale 15% off
  • Standard
    67 pages
    English language
    sale 15% off
  • Standard
    67 pages
    English language
    sale 15% off
ISO
ISO 683-3:2022(Main)
Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels

This document specifies the technical delivery requirements for — semi-finished products, hot formed (e.g. blooms, billets, slabs) (see NOTE 1), — bars (see NOTE 1), — wire rod, — finished flat products, and — hammer or drop forgings (see NOTE 1) manufactured from the case-hardening non-alloy or alloy steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2. The steels are, in general, intended for the manufacture of case-hardened machine parts. NOTE 1 Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammerforged bars are covered under semi-finished products or bars and not under the term “hammer and drop forgings”. NOTE 2 For International Standards relating to steels conforming with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.

  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    35 pages
    French language
    sale 15% off
ISO
ISO 9443:2018(Main)
Surface quality classes for hot-rolled bars and wire rod

This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions dN from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser. By agreement between manufacturer and purchaser, this document can also be applied to other special profiles. This document is particularly applicable to steels for engineering and structural applications. This document does not include any requirements for the permissible depth of surface decarburization. NOTE The determination of depth of surface decarburization is presented in ISO 3887. The material standards for steel bars and wire rod can exclude the application of one or other of the surface quality classes of this document. They can also cover requirements for surface quality which deviate from this document. In these cases the requirements of the material standard prevail.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off
ISO
ISO 683-5:2017(Main)
Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels

ISO 683-5:2017 gives the technical delivery requirements for - semi-finished products, e.g. blooms, billets, slabs (see note 1), - bars (see note 1), - wire rod, - hot-rolled plates (see note 2), and - hammer or drop forgings (see note 1) manufactured from the nitriding steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1, rows 2 to 5, and in one of the surface conditions given in Table 2. The steels are generally intended for the fabrication of quenched and tempered and, subsequently, nitriding machine parts. The requirements for mechanical properties given in this document are restricted to the sizes given in Table 6. NOTE 1 Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings". NOTE 2 The term "plate" includes in the following also wide flats unless otherwise stated. In special cases, variations in these technical delivery requirements or additions to these requirements can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B). In addition to this document, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
ISO
ISO 683-4:2016(Main)
Heat-treatable steels, alloy steels and free-cutting steels — Part 4: Free-cutting steels

ISO 683-4:2016 gives the technical delivery requirements for semi-finished products (e.g. blooms, billets, slabs), bars and wire rod, manufactured from the free-cutting steels listed in Table 2 and supplied in one of the treatment conditions given for the different types of products in Table 1, rows 2 to 4. It covers three groups of free-cutting steels for mechanical purposes as listed in Table 2, namely a) not intended for heat treatment, b) suitable for case-hardening, and c) suitable for quenching and tempering. Free-cutting steels are often used as bright bars. For these products, refer to ISO 683‑18. In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B). In addition to ISO 683-4:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off
ISO
ISO 683-1:2016(Main)
Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Non-alloy steels for quenching and tempering·

ISO 683-1:2016 specifies the technical delivery requirements for - semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1), - bars (see Note 1), - wire rod, - finished flat products, and - hammer or drop forgings (see Note 1) manufactured from the direct hardening non-alloy steels and the non-alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2. The steels are, in general, intended for the manufacture of quenched and tempered or austempered (see 3.2 and Note 2) and flame- or induction-hardened machine parts (see Tables 9 and 11), but can also be partly used in the normalized condition (see Table 10). The requirements for mechanical properties given in ISO 683-1:2016 are restricted to the sizes given in Tables 9 and 10. NOTE 1 Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are, in the following, covered under semi-finished products or bars and not under the term "hammer and drop forgings". NOTE 2 For the purposes of simplification, the term "quenched and tempered" is, unless otherwise indicated, used in the following also for the austempered condition. NOTE 3 For International Standards relating to steels complying with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography. NOTE 4 ISO 683-1 :2016 does not apply to bright products and bars and wire rod for cold heading. For such products, see ISO 683‑18 and ISO 4954. In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement between the manufacturer and purchaser at the time of enquiry and order (see 5.2 and Annex B). In addition to ISO 683-1:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    39 pages
    English language
    sale 15% off
  • Standard
    39 pages
    English language
    sale 15% off
  • Standard
    41 pages
    French language
    sale 15% off
ISO
ISO 683-2:2016(Main)
Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels for quenching and tempering

ISO 683-2:2016 specifies the technical delivery requirements for - semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1), - bars (see Note 1), - wire rod, finished flat products, and - hammer or drop forgings (see Note 1) manufactured from the direct hardening alloy steels and the alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2. The steels are, in general, intended for the manufacture of quenched and tempered or austempered (see 3.2 and Note 2) and flame- or induction-hardened machine parts (see Tables 8 and 9). The requirements for mechanical properties given in ISO 683-2:2016 are restricted to the sizes given in the relevant Table 8. NOTE 1 Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings". NOTE 2 For the purposes of simplification, the term "quenched and tempered" is, unless otherwise indicated, used in the following also for the austempered condition. NOTE 3 For International Standards relating to steels complying with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography. NOTE 4 ISO 683-2 :2016 does not apply to bright products and bars and wire rod for cold heading. For such products, see ISO 683‑18 and ISO 4954. In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B). In addition to ISO 683-2:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    40 pages
    English language
    sale 15% off
  • Standard
    40 pages
    English language
    sale 15% off
  • Standard
    40 pages
    French language
    sale 15% off