ISO 2125:1975

Withdrawal of ISO 2125-1975

Annulation de l'ISO 2125-1975

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-1975
• Withdrawal Date: 30-Sep-1975
• ICS: 53.040.01 - Continuous handling equipment in general
• Technical Committee: ISO/TC 101 - Continuous mechanical handling equipment
• Drafting Committee: ISO/TC 101 - Continuous mechanical handling equipment
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 01-Apr-1982

Relations

• Revised: ISO 7149:1982 - Continuous handling equipment — Safety code — Special rules
• Effective Date: 15-Apr-2008

Standards Content (Sample)

@ 2125
INTERNATIONAL STANDARD
‘aie
FOR STANDARDIZATION .UFIJ\ ti4POLIHAR OPrAHM3AUMR flO CTAHLIAPTM3AUMM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
INTERNATIONAL ORGANIZATION
L.
Continuous mechanical handling equipment for loose bulk
materials - Vibrating feeders and conveyors, shaking or
reciprocating feeders and oscillating conveyors - Safety code
Engins de manutention continue pour produits en vrac - Distributeurs et transporteurs vibrants,
distributeurs a mouvement alternatif et transporteurs par secousses ou par inertie - Code de sécurité
First edition - 1975-10-15
LLI
-
UDC 621.867.2-78 Ref. No. IS0 2125-1975 (E)
Lo
5
Descriptors : handling equipment, continuous handling, bulk products, conveyors, oscillating conveyors, mechanical feeders, safety require-
ln
c.4
ments.
c
c.4
s
Price based on 2 pages
r.

---------------------- Page: 1 ----------------------
FO R E WO R D
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Vember Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Vember Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
Prior to 1972, the results of the work of the Technical Committees were published
as IS0 Recommendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee IÇO/TC 101 has reviewed IS0 Recommandation R 2125 and found it
technically suitable for transformation. International Standard IS0 21 25 therefore
replaces IS0 Recommendation R 21 25-1971 to which it is technically identical.
IS0 Recommendation R 2125 was approved by the Member Bodies of the
following countries :
Australia Germany Spain
Austria India Sweden
Belgium Thail and
Japan
Czec hod ova k ia Netherlands United Kingdom
Egypt, Arab Rep. of New Zealand U.S.A.
U.S.S.R.
France South Africa, Rep. of
No Member Body expressed disapproval of the Recommendation.
No Member Body disapproved the transformation of ISO/R 2125 into an
International Standard.
O International Organization for Standardization, 1975
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STAN DARD IS0 2125-1975 (E)
Continuous mechanical handling equipment for loose bulk
materials - Vibrating feeders and conveyors, shaking or
reciprocating feeders and oscillating conveyors - Safety code
1 SCOPE
4.1.2 Guiding and centring devices for the materials shall
be provided, if necessary, at the feed points.
This International Standard specifies, in addition to the
general safety rules set out in ISO/R 1819, the special
4.1.3 In addition to rule 2.1.3 of ISO/R 1819, a safety
safety rules for the following continuous mechanical
device (rails, barrier, guards, etc.) shall be provided in the
handling equipment for loose bulk materials : vibrating
feeding zone if it is normally forseeable that material could
feeders and conveyors, shaking or reciprocating feeders,
be thrown out.
oscillating conveyors.
4.1.4 Inspection holes or flaps wit
...

@ 2125
INTERNATIONAL STANDARD
'*=e
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION -UE'X3\ HAPOLIHAR OPrAHM3AUMR no CTAHLiAPTM3AUMM *ORGANISATION INTERNATIONALE DE NORMALISATION
Continuous mechanical handling equipment for loose bulk
materials - Vibrating feeders and conveyors, shaking or
reciprocating feeders and oscillating conveyors - Safety code
Engins de manutention continue pour produits en vrac - Distributeurs et transporteurs vibrants,
distributeurs à mouvement alternatif et transporteurs par secousses ou par inertie - Code de sécurité
First edition - 1975-10-15
-
w
-
UDC 621.867.2-78 Ref. No. IS0 2125-1975 (E)
m
rc
n
Descriptors : handling equipment, continuous handling, bulk products, conveyors, oscillating conveyors, mechanical feeders, safety require-
Li,
N
ments.
c
hl
iq
Price based on 2 pages
I

---------------------- Page: 1 ----------------------
FO R E WO R D
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Wember Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
hfember Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
Prior to 1972, the results of the work of the Technical Committees were published
as IS0 Recommendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee ISO/TC 101 has reviewed IS0 Recommandation R 2125 and found it
technically suitable for transformation. international Standard IS0 2125 therefore
replaces IS0 Recommendation R 2125-1971 to which it is technically identical.
IS0 Recommendation R 2125 was approved by the Member Bodies of the
following countries :
Australia Germany Spain
Au stria India Sweden
Belgium Thai I and
Japan
Czechoslovak ia Netherlands United Kingdom
Egypt, Arab Rep. of New Zealand U.S.A.
France South Africa, Rep. of U.S.S.R.
No Member Body expressed disapproval of the Recommendation.
No Member Body disapproved the transformation of ISO/R 2125 into an
International Standard.
O International Organization for Standardization, 1975 0
Printed in Switzerland

---------------------- Page: 2 ----------------------
~
INTERNATIONAL STANDARD IS0 2125-1975 (E)
Continuous mechanical handling equipment for loose bulk
materials - Vibrating feeders and conveyors, shaking or
reciprocating feeders and oscillating conveyors - Safety code
1 SCOPE
4.1.2 Guiding and centring devices for the materials shall
be provided, if necessary, at the feed points.
This International Standard specifies, in addition to the
general safety rules set out in ISO/R 1819, the special
4.1.3 In addition to rule 2.1.3 of ISO/R 1819, a safety
safety rules for the following continuous mechanical
device (rails, barrier, guards, etc.) shall be provided in the
handling equipment for loose bulk materials : vibrating
t
feeding zone if it is normally forseeable that material could
feeders and conveyors, shaking or reciprocating feeders,
be thrown out.
oscillating conveyors.
4.1.4 Inspection holes or flaps wit
...