ISO 15502:2005/Cor 1:2007

Household refrigerating appliances — Characteristics and test methods — Technical Corrigendum 1

Appareils de réfrigération à usage ménager — Caractéristiques et méthodes d'essai — Rectificatif technique 1

General Information

• Status: Withdrawn
• Publication Date: 13-Feb-2007
• Withdrawal Date: 13-Feb-2007
• ICS: 97.040.30 - Domestic refrigerating appliances
• Technical Committee: ISO/TC 86 - Refrigeration and air-conditioning
• Drafting Committee: ISO/TC 86 - Refrigeration and air-conditioning
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 17-Dec-2007

Relations

• Corrects: ISO 15502:2005 - Household refrigerating appliances — Characteristics and test methods
• Effective Date: 06-Jun-2022
• Child: ISO 15502:2005 - Household refrigerating appliances — Characteristics and test methods
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL STANDARD ISO 15502:2005
TECHNICAL CORRIGENDUM 1
Published 2007-02-15

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION


Household refrigerating appliances — Characteristics and test
methods
TECHNICAL CORRIGENDUM 1
Technical Corrigendum 1 to ISO 15502:2005 was prepared by Technical Committee ISO/TC 86, Refrigeration
and air-conditioning, Subcommittee SC 5, Testing and rating of household refrigeration appliances.

Page 1, Normative references
Date and correct the reference to IEC 60335-2-24 by replacing it with the following:
IEC 60335-2-24:2006, Household and similar electrical appliances — Safety — Part 2-24: Particular
requirements for refrigerating appliances, ice-cream appliances and ice-makers
Delete the footnote.
Page 56, Note to Figure 15
Replace the Note with the following, thereby deleting an incorrect cross-reference to Figure 13:
NOTE The arrangements for cellar compartments also apply to appliances that consist only of a cellar
compartment. For different evaporator arrangements in the fresh-food compartment, see also Figure 14.
Page 59, Figure 17
Add “Dimensions in millimetres” to the top right-hand corner of the figure.
Pages 65 and 66, Figures 18 and 19
Replace Figures 18 and 19 with the following, whose legends have been corrected and to which captions have
been added.
ICS 97.040.30 Ref. No. ISO 15502:2005/Cor.1:2007(E)
©  ISO 2007 – All rights reserved
Published in Switzerland

---------------------- Page: 1 ----------------------
ISO 15502:2005/Cor.1:2007(E)
If d + d u 20 mm:
1 2
dimension of shelf = D′
If d + d > 20 mm:
1 2
dimension of shelf = D

a) Determination of width of shelf

If d + d u 20 mm:
...