ISO 22085-3:2022
(Main)Intelligent transport systems (ITS) — Nomadic device service platform for micro mobility — Part 3: Data structure and data exchange procedures
Intelligent transport systems (ITS) — Nomadic device service platform for micro mobility — Part 3: Data structure and data exchange procedures
This document specifies the data structure and data exchange procedure related to micro mobility service applications utilizing a P-ITS-S (i.e. nomadic devices), including car sharing, parcel delivery and first-mile and last-mile connections. In addition, this document delivers related requirements for the development and operation of the service platform between nomadic devices and micro mobility with intelligent transport systems (ITS) technologies. This document defines a data structure and data exchange procedure based on the datasets and messages which are defined in ISO 22085-2.
Systèmes de transport intelligents (ITS) — Plate-forme de services via appareils nomades pour la micro-mobilité — Partie 3: Structure des données et procédures d'échange de données
General Information
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 22085-3
First edition
2022-01
Intelligent transport systems (ITS) —
Nomadic device service platform for
micro mobility —
Part 3:
Data structure and data exchange
procedures
Systèmes de transport intelligents (ITS) — Plate-forme de services via
appareils nomades pour la micro-mobilité —
Partie 3: Structure des données et procédures d'échange de données
Reference number
ISO 22085-3:2022(E)
© ISO 2022
---------------------- Page: 1 ----------------------
ISO 22085-3:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 22085-3:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviated terms . 2
4 Overview . 3
4.1 Introduction . 3
4.2 Message overview . . 4
5 Data structure . 5
5.1 Data structure for request-mm-status . 5
5.2 Data structure for mm-status-response . 5
5.3 Data structure for stop-notify-mm-status . 6
5.4 Data structure for notify-mm-service . 6
5.5 Data structure for stop-notify-mm-service . 7
5.6 Data structure for charging-station-information . 8
5.7 Data structure for parking-space-information . 8
5.8 Data structure for reservation-information . 9
5.9 Data structure for public-transit-schedule. 10
5.10 Data structure for public-transit-reserved-information . 10
5.11 Data structure for navigation-route-information . 11
5.12 Data structure for traffic-information . 11
5.13 Data structure for accident-information .12
5.14 Data structure for danger-zone-information .12
5.15 Data structure for warning-message . 13
5.16 Data structure for toll-balance-information . 14
5.17 Data structure for disconnection-warning-message . 15
5.18 Data structure for return-information . 16
5.19 Data structure for payment-information . 17
5.20 request-public-transit-schedule . 18
5.21 request-public-transit-reservation . 18
6 Data exchange procedure .19
6.1 Overview . 19
6.2 Pre-trip . 19
6.2.1 General . 19
6.2.2 UC 1.1 MM information providing service. 19
6.2.3 UC 1.2 Navigation service-linked information on charging station .20
6.2.4 UC 1.3 Pre-scanning available parking space service . 21
6.2.5 UC 1.4 MM sharing service . 22
6.2.6 UC 1.5 MM as an integrated mobility service . 23
6.3 En-route . 24
6.3.1 General . 24
6.3.2 UC 2.1 Traffic information providing service . 24
6.3.3 UC 2.2 MM status monitoring service . 25
6.3.4 UC 2.3 Mobile tolling service . 26
6.3.5 UC 2.4 Adaptive route management service . 27
6.3.6 UC 2.5 Searching available parking space service on the way .28
6.3.7 UC 2.6 Keyless go service for shared MM .29
6.3.8 UC 2.7 Interconnected transfer information providing service .30
6.4 Post-trip . 31
6.4.1 General . 31
iii
© ISO 2022 – All rights reserved
---------------------- Page: 3 ----------------------
ISO 22085-3:2022(E)
6.4.2 UC 3.1 MM driving information providing service . 31
6.4.3 UC 3.2 Charging station information service. 32
6.4.4 UC 3.3 Parked MM position providing service . 33
6.4.5 UC 3.4 Shared MM return service .34
Bibliography .36
iv
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 22085-3:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.
A list of all parts in the ISO 22085 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
v
© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
ISO 22085-3:2022(E)
Introduction
Micro mobility can be defined as a small or compact-sized electric vehicle. Normally, it is designed to
be used as a first-mile and last-mile service connecting public transit routes or to provide personal
mobility with one or two passengers for a short-distance trip.
The nomadic device service platform aims to accommodate the specific needs of integrated mobility
services for either urban or rural areas. The service platform focuses on the use of data exchange
interface standards between micro mobility and nomadic devices to enable the development of cloud-
based ITS using wireless networks.
This document fosters the introduction of nomadic devices in the public transport and automotive
world. It specifies the data structure and data exchange procedure based on Data eXchange Messages
(DXMs) at the application level regarding pre-trip, post-trip and while driving, in order to identify
connectivity among a user’s personal ITS station (P-ITS-S, for example nomadic devices), vehicle-ITS-
station gateway (V-ITS-S) and central ITS station (C-ITS-S).
This document covers subjects related to mobility services using micro mobility, including micro
mobility sharing, parcel delivery and first-mile and last-mile connections in urban areas. This DXM
implementation describes how such mobility services based on micro mobility are provided using a
P-ITS-S.
vi
© ISO 2022 – All rights reserved
---------------------- Page: 6 ----------------------
INTERNATIONAL STANDARD ISO 22085-3:2022(E)
Intelligent transport systems (ITS) — Nomadic device
service platform for micro mobility —
Part 3:
Data structure and data exchange procedures
1 Scope
This document specifies the data structure and data exchange procedure related to micro mobility
service applications utilizing a P-ITS-S (i.e. nomadic devices), including car sharing, parcel delivery and
first-mile and last-mile connections. In addition, this document delivers related requirements for the
development and operation of the service platform between nomadic devices and micro mobility with
intelligent transport systems (ITS) technologies.
This document defines a data structure and data exchange procedure based on the datasets and
messages which are defined in ISO 22085-2.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 21217, Intelligent transport systems — Station and communication architecture
3 Terms, definitions and abbreviated terms
For the purposes of this document, the terms and definitions given in ISO 21217 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1 Terms and definitions
3.1.1
central ITS station
C-ITS-S
ITS station assuming a central role
3.1.2
personal ITS station
P-ITS-S
implementation of an ITS station as a personal ITS subsystem (e.g. nomadic device or mobile device)
which provides communication connectivity via a wireless communication network (3G, 4G, and 5G),
mobile wireless broadband (WIMAX, HC-SDMA, etc.), WiFi and short-range links, such as Bluetooth,
Zigbee, etc. to connect portable devices to the motor vehicle communications system network
1
© ISO 2022 – All rights reserved
---------------------- Page: 7 ----------------------
ISO 22085-3:2022(E)
3.1.3
micro mobility
MM
eco-friendly personal electric vehicle for one or two passengers
3.1.4
in mobility network
IMN
local network bus among electrical control units in micro mobility (3.1.3), providing diagnostics
information to a P-ITS-S (3.1.2) through a V-ITS-SG (3.1.8)
3.1.5
micro mobility service provider
MMSP
service provider for micro mobility (3.1.3), including parking lot management service, public transit
authority, charging station management service, tolling service authority, car sharing service and
traffic information service, amongst others
3.1.6
micro mobility communication network
MMCN
communication network between P-ITS-S (3.1.2) and C-ITS-S (3.1.1)
3.1.7
public communication network
PCN
network between micro mobility cloud servers (MMCS) and micro mobility service providers (3.1.5)
used to provide micro mobility (3.1.3) services information on, for example, charging stations, parking
lots and traffic congestion
3.1.8
vehicle-ITS-station gateway
V-ITS-SG
ITS-S node used to interconnect two different OSI protocol stacks at layers 5 through to 7 between an in
mobility network (3.1.4) and a P-ITS-S (3.1.2)
3.2 Abbreviated terms
C conditional
DTC diagnostic trouble code
DXM data exchange message
EXE executor
IMN in mobility network
ITIPS interconnected transfer information providing service
ITS intelligent transport systems
ND nomadic device
M mandatory
MM micro mobility
MMCS micro mobility cloud server
2
© ISO 2022 – All rights reserved
---------------------- Page: 8 ----------------------
ISO 22085-3:2022(E)
MMIMS Micro mobility as an integrated mobility service
MMSRS micro mobility sharing service
O optional
SAPSS searching available parking space service
SOC state of charge
4 Overview
4.1 Introduction
Conceptual aspects of the general use cases in ISO/TR 22085-1 are depicted in Figure 1 and are
summarized in Table 1. Details of ITS-S (i.e. V-ITS-S, P-ITS-S, and C-ITS-S) are specified in ISO 21217.
Figure 1 — Conceptual aspects of the general use cases
Table 1 — Use cases clusters and associated use cases overview
Title of use cases cluster Brief description
1. Pre-trip This cluster specifies the detailed use cases of pre-trip stage for MM. It includes 5
different use cases:
3
© ISO 2022 – All rights reserved
---------------------- Page: 9 ----------------------
ISO 22085-3:2022(E)
Table 1 (continued)
Title of use cases cluster Brief description
— UC 1.1 – MM information providing services
— UC 1.2 – Navigation service linked information on charging station
— UC 1.3 – Pre-scanning available parking space service
— UC 1.4 – MM sharing service
— UC 1.5 – MM as an integrated mobility service
2. En-route This cluster specifies the detailed use cases of the en-route stage for MM. It includes
7 different use cases.
— UC 2.1 – Traffic information providing service
— UC 2.2 – MM status monitoring service
— UC 2.3 – Mobile tolling service
— UC 2.4 – Adaptive route management service
— UC 2.5 – Searching available parking space service on the way
— UC 2.6 – Keyless go service for shared micro mobility
— UC 2.7 – Interconnected transfer information providing service
3. Post-trip This cluster specifies the detailed use cases of post-trip stage for MM. It includes 4
different use cases.
— UC 3.1 – MM driving information providing service
— UC 3.2 – Charging station information service
— UC 3.3 – Parked MM position providing service
— UC 3.4 – Sharing MM return service
4.2 Message overview
DXMs regarding the use cases defined in ISO/TR 22085-1 are summarized in Table 2.
Table 2 — DXMs for mobility service using MM
ID DXM name Exe Description
1 request-mm-status P Request V-ITS-S to notify MM status with SOC, DTC, mile-
age, V-ITS-S-ID.
2 mm-status-response V Send MM status information (V-ITS-S-ID, SOC, DTC, mile-
age) to P-ITS-S.
3 stop-notify-mm-status P Stop sending MM status information to P-ITS-S.
4 notify-mm-service P Send MM status information, V-ITS-S-ID, position and user
information to C-ITS-S. After the first contact, send only the
P-ITS-S position, MM status information and V-ITS-S-ID in
a predefined time interval.
5 stop-notify-mm-service P Stop the communication to the C-ITS-S.
6 charging-station-information C Send charging station location to P-ITS-S.
7 parking-space-information C Send parking location information to P-ITS-S.
4
© ISO 2022 – All rights reserved
---------------------- Page: 10 ----------------------
ISO 22085-3:2022(E)
Table 2 (continued)
ID DXM name Exe Description
8 reservation-information C Send sharing service reservation information to P-ITS-S.
9 public-transit-schedule C Send public transit information with arrival/departure
time and transit type to P-ITS-S.
10 public-transit-reserved-informa- C Send reserved information to P-ITS-S.
tion
11 navigation-route-information C Send navigation route information to P-ITS-S.
12 traffic-information C Send traffic information to ND (P-ITS-S) from server (C-ITS-S).
13 accident-information C Send accident information from server (C-ITS-S) to ND
(P-ITS-S).
14 danger-zone-information C Send danger zone location information to P-ITS-S.
15 warning-message C Send warning message if DTC error has occurred.
16 toll-balance-information C Definition of toll-balance-information.
17 disconnection-warning-message C Send connection lost warning message where connection
between V-ITS-S and P-ITS-S has been disconnected.
18 return-information C Send returning MM information.
19 payment-information C Send sharing service reservation information to P-ITS-S.
20 request-public-transit-schedule P Send public transit schedule request from ND (P-ITS-S)
to server (C-ITS-S).
21 request-public-transit-reservation P Reserve public transit schedule from ND (P-ITS-S) to
server (C-ITS-S).
5 Data structure
5.1 Data structure for request-mm-status
Table 3 shows the data structure for the DXM request-mm-status to request MM status information and
V-ITS-S ID from the ND (P-ITS-S).
Table 3 — Data structure for request-mm-status
ID 1 Request that V-ITS-S notifies MM status with SOC, DTC, mileage
and V-ITS-S-ID.
name
request-mm-status
exec P-ITS-S
5.2 Data structure for mm-status-response
Table 4 shows the data structure for the DXM mm-status-response to send MM status information to
the ND (P-ITS-S).
5
© ISO 2022 – All rights reserved
Data structure Msg
---------------------- Page: 11 ----------------------
ISO 22085-3:2022(E)
Table 4 — Data structure for mm-status-response
ID 2 Send MM status information (V-ITS-S-ID, SOC, DTC, mileage) to
the P-ITS-S
name mm-status-response
exec V-ITS-S
5.3 Data structure for stop-notify-mm-status
Table 5 shows the data structure for the DXM stop-notify-mm-status to stop the communication from
the vehicle (V-ITS-S).
Table 5 — Data structure for stop-notify-mm-status
ID 3 Stop sending MM status information to the P-ITS-S.
name stop-notify-mm-status
exec P-ITS-S
5.4 Data structure for notify-mm-service
Table 6 shows the data structure for the DXM notify-mm-service to send MM status information, V-ITS-
S-ID, position, user information from the P-ITS-S to the C-ITS-S.
6
© ISO 2022 – All rights reserved
Data structure Msg Data structure Msg
---------------------- Page: 12 ----------------------
ISO 22085-3:2022(E)
Table 6 — Data structure for notify-mm-service
ID 4 Send MM status information, V-ITS-S-ID, position and user infor-
mation to the C-ITS-S. After the first contact, send only the P-ITS-S
name notify-mm-service
position, MM status information and V-ITS-S-ID in a predefined
time interval.
exec P-ITS-S
5.5 Data structure for stop-notify-mm-service
Table 8 shows the data structure for the DXM stop-notify-mm-service to send MM status information,
V-ITS-S-ID, position and user information from the P-ITS-S to the C-ITS-S.
7
© ISO 2022 – All rights reserved
Data structure Msg
---------------------- Page: 13 ----------------------
ISO 22085-3:2022(E)
Table 7 — Data structure for stop-notify-mm-service
ID 5 Stop the communication to the C-ITS-S.
name stop-notify-mm-service
exec P-ITS-S
5.6 Data structure for charging-station-information
Table 8 shows the data structure for the DXM charging-station-information to send charging station
location information from the server (C-ITS-S) to the ND (P-ITS-S).
Table 8 — Data structure for charging-station-information
ID 6 Send charging station location to P-ITS-S.
name charging-station-information
exec C-ITS-S
5.7 Data structure for parking-space-information
Table 9 shows the data structure for the DXM parking-space-information to send available parking
space information from the server (C-ITS-S) to the nomadic device (P-ITS-S).
8
© ISO 2022 – All rights reserved
Data structure Msg Data structure Msg
---------------------- Page: 14 ----------------------
ISO 22085-3:2022(E)
Table 9 — Data structure for parking-space-information
ID 7 Send parking location information to the P-ITS-S.
name parking-space-information
exec C-ITS-S
5.8 Data structure for reservation-information
Table 10 shows the data structure for the DXM reservation-information to send MM sharing service
reservation information from the server (C-ITS-S) to the ND (P-ITS-S).
Table 10 — Data structure for reservation-information
ID 8 Send sharing service reservation information to the P-ITS-S.
name reservation-information
exec C-ITS-S
9
© ISO 2022 – All rights reserved
Msg
Data structure Msg Data structure
---------------------- Page: 15 ----------------------
ISO 22085-3:2022(E)
5.9 Data structure for public-transit-schedule
Table 11 shows the data structure for the DXM public-transit-schedule to send public transit schedule
information from the server (C-ITS-S) to the ND (P-ITS-S).
Table 11 — Data structure for public-transit-schedule
ID 9 Send public transit information with arrival/departure time and
transit type to the P-ITS-S.
name public-transit-schedule
exec C-ITS-S
5.10 Data structure for public-transit-reserved-information
Table 12 shows the data structure for the DXM public-transit-reserved-information to send public
transit reservation information from the ND (P-ITS-S) to the server (C-ITS-S).
Table 12 — Data structure for public-transit-reserved-information
ID 10 Send transit reserved information to the P-ITS-S.
name public-transit-reserved-infor-
mation
exec C-ITS-S
10
© ISO 2022 – All rights reserved
Data structure Msg Data structure Msg
---------------------- Page: 16 ----------------------
ISO 22085-3:2022(E)
5.11 Data structure for navigation-route-information
Table 13 shows the data structure for the DXM navigation-route-information to send navigation route
information from the server (C-ITS-S) to the ND (P-ITS-S).
Table 13 — Data structure for public-transit-reservation
ID 11 Send navigation route information to the P-ITS-S.
name navigation-route-information
exec C-ITS-S
5.12 Data structure for traffic-information
Table 14 shows the data structure for the DXM traffic-information to send traffic information from the
server (C-ITS-S) to the ND (P-ITS-S).
11
© ISO 2022 – All rights reserved
Data structure Msg
---------------------- Page: 17 ----------------------
ISO 22085-3:2022(E)
Table 14 — Data structure for traffic-information
ID 12 Send traffic information to the ND (P-ITS-S) from the server
(C-ITS-S).
name traffic-information
exec C-ITS-S
5.13 Data structure for accident-information
Table 15 shows the data structure for the DXM accident-information to send accident information from
the server (C-ITS-S) to the ND (P-ITS-S).
Table 15 — Data structure for accident-information
ID 13 Send accident information from the server (C-ITS-S) to the ND
(P-ITS-S).
name accident-information
exec C-ITS-S
5.14 Data structure for danger-zone-information
Table 16 shows the data structure for the DXM danger-zone-information to send danger zone
information from the server (C-ITS-S) to the ND (P-ITS-S).
12
© ISO 2022 – All rights reserved
Data structure Msg Data structure Msg
---------------------- Page: 18 ----------------------
ISO 22085-3:2022(E)
Table 16 — Data structure for danger-zone-information
ID 14 Send danger zone information from server (C-ITS-S) to the ND
(P-ITS-S).
name danger-zone-information
exec C-ITS-S
5.15 Data structure for warning-message
Table 17 shows the data structure for the DXM warning-message to send a warning message from the
server (C-ITS-S) to the ND (P-ITS-S).
13
© ISO 2022 – All rights reserved
Data structure Ms
...
INTERNATIONAL ISO
STANDARD 22085-3
First edition
Intelligent transport systems (ITS) —
Nomadic device service platform for
micro mobility —
Part 3:
Data structure and data exchange
procedures
Systèmes de transport intelligents coopératifs (C-ITS) - Plate-forme de
services via appareils nomades pour la micro-mobilité —
Partie 3: Structure des données et procédures d'échange de données
PROOF/ÉPREUVE
Reference number
ISO 22085-3:2021(E)
© ISO 2021
---------------------- Page: 1 ----------------------
ISO 22085-3:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 22085-3:2021(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviated terms . 2
4 Overview . 3
4.1 Introduction . 3
4.2 Message overview . . 4
5 Data structure . 5
5.1 Data structure for request-mm-status . 5
5.2 Data structure for mm-status-response . 5
5.3 Data structure for stop-notify-mm-status . 6
5.4 Data structure for notify-mm-service . 6
5.5 Data structure for stop-notify-mm-service . 7
5.6 Data structure for charging-station-information . 8
5.7 Data structure for parking-space-information . 8
5.8 Data structure for reservation-information . 9
5.9 Data structure for public-transit-schedule. 10
5.10 Data structure for public-transit-reserved-information . 10
5.11 Data structure for navigation-route-information . 11
5.12 Data structure for traffic-information . 11
5.13 Data structure for accident-information .12
5.14 Data structure for danger-zone-information .12
5.15 Data structure for warning-message . 13
5.16 Data structure for toll-balance-information . 14
5.17 Data structure for disconnection-warning-message . 15
5.18 Data structure for return-information . 16
5.19 Data structure for payment-information . 17
5.20 request-public-transit-schedule . 18
5.21 request-public-transit-reservation . 18
6 Data exchange procedure .19
6.1 Overview . 19
6.2 Pre-trip . 19
6.2.1 General . 19
6.2.2 UC 1.1 MM information providing service. 19
6.2.3 UC 1.2 Navigation service-linked information on charging station .20
6.2.4 UC 1.3 Pre-scanning available parking space service . 21
6.2.5 UC 1.4 MM sharing service . 22
6.2.6 UC 1.5 MM as an integrated mobility service . 23
6.3 En-route . 24
6.3.1 General . 24
6.3.2 UC 2.1 Traffic information providing service . 24
6.3.3 UC 2.2 MM status monitoring service . 25
6.3.4 UC 2.3 Mobile tolling service . 26
6.3.5 UC 2.4 Adaptive route management service . 27
6.3.6 UC 2.5 Searching available parking space service on the way .28
6.3.7 UC 2.6 Keyless go service for shared MM .29
6.3.8 UC 2.7 Interconnected transfer information providing service .30
6.4 Post-trip . 31
6.4.1 General . 31
iii
© ISO 2021 – All rights reserved PROOF/ÉPREUVE
---------------------- Page: 3 ----------------------
ISO 22085-3:2021(E)
6.4.2 UC 3.1 MM driving information providing service . 31
6.4.3 UC 3.2 Charging station information service. 32
6.4.4 UC 3.3 Parked MM position providing service . 33
6.4.5 UC 3.4 Shared MM return service .34
Bibliography .36
iv
PROOF/ÉPREUVE © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 22085-3:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.
A list of all parts in the ISO 22085 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
v
© ISO 2021 – All rights reserved PROOF/ÉPREUVE
---------------------- Page: 5 ----------------------
ISO 22085-3:2021(E)
Introduction
Micro mobility can be defined as a small or compact-sized electric vehicle. Normally, it is designed to
be used as a first-mile and last-mile service connecting public transit routes or to provide personal
mobility with one or two passengers for a short-distance trip.
The nomadic device service platform aims to accommodate the specific needs of integrated mobility
services for either urban or rural areas. The service platform focuses on the use of data exchange
interface standards between micro mobility and nomadic devices to enable the development of cloud-
based ITS using wireless networks.
This document fosters the introduction of nomadic devices in the public transport and automotive
world. It specifies the data structure and data exchange procedure based on Data eXchange Messages
(DXMs) at the application level regarding pre-trip, post-trip and while driving, in order to identify
connectivity among a user’s personal ITS station (P-ITS-S, for example nomadic devices), vehicle-ITS-
station gateway (V-ITS-S) and central ITS station (C-ITS-S).
This document covers subjects related to mobility services using micro mobility, including micro
mobility sharing, parcel delivery and first-mile and last-mile connections in urban areas. This DXM
implementation describes how such mobility services based on micro mobility are provided using a
P-ITS-S.
vi
PROOF/ÉPREUVE © ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
INTERNATIONAL STANDARD ISO 22085-3:2021(E)
Intelligent transport systems (ITS) — Nomadic device
service platform for micro mobility —
Part 3:
Data structure and data exchange procedures
1 Scope
This document specifies the data structure and data exchange procedure related to micro mobility
service applications utilizing a P-ITS-S (i.e. nomadic devices), including car sharing, parcel delivery and
first-mile and last-mile connections. In addition, this document also delivers related requirements for
the development and operation of the service platform between nomadic devices and micro mobility
with Intelligent Transport Systems (ITS) technologies.
This document defines a data structure and data exchange procedure based on the datasets and
messages which are defined in ISO 22085-2.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 21217, Intelligent transport systems — Station and communication architecture
3 Terms, definitions and abbreviated terms
For the purposes of this document, the terms and definitions given in ISO 21217 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1 Terms and definitions
3.1.1
central ITS station
C-ITS-S
ITS station assuming a central role
3.1.2
personal ITS station
P-ITS-S
implementation of an ITS station as a personal ITS subsystem (e.g. nomadic device or mobile device)
which provides communication connectivity via a wireless communication network (3G, 4G, and 5G),
mobile wireless broadband (WIMAX, HC-SDMA, etc.), WiFi and short-range links, such as Bluetooth,
Zigbee, etc. to connect portable devices to the motor vehicle communications system network
1
© ISO 2021 – All rights reserved PROOF/ÉPREUVE
---------------------- Page: 7 ----------------------
ISO 22085-3:2021(E)
3.1.3
micro mobility
MM
eco-friendly personal electric vehicle for one or two passengers
3.1.4
in mobility network
IMN
local network bus among electrical control units in micro mobility (3.1.3), providing diagnostics
information to a P-ITS-S (3.1.2) through a V-ITS-SG (3.1.8)
3.1.5
micro mobility service provider
MMSP
service provider for micro mobility (3.1.3), including parking lot management service, public transit
authority, charging station management service, tolling service authority, car sharing service and
traffic information service, amongst others
3.1.6
micro mobility communication network
MMCN
communication network between P-ITS-S (3.1.2) and C-ITS-S (3.1.1)
3.1.7
public communication network
PCN
network between micro mobility cloud servers (MMCS) and micro mobility service providers (3.1.5)
used to provide micro mobility (3.1.3) services information on, for example, charging stations, parking
lots and traffic congestion
3.1.8
vehicle-ITS-station gateway
V-ITS-SG
ITS-S node used to interconnect two different OSI protocol stacks at layers 5 through to 7 between an in
mobility network (3.1.4) and a P-ITS-S (3.1.2)
3.2 Abbreviated terms
C conditional
DTC diagnostic trouble code
DXM data exchange message
EXE executor
IMN in mobility network
ITIPS interconnected transfer information providing service
ITS intelligent transport systems
ND nomadic device
M mandatory
MM micro mobility
MMCS micro mobility cloud server
2
PROOF/ÉPREUVE © ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
ISO 22085-3:2021(E)
MMIMS Micro mobility as an integrated mobility service
MMSRS micro mobility sharing service
O optional
SAPSS searching available parking space service
SOC state of charge
4 Overview
4.1 Introduction
Conceptual aspects of the general use cases in ISO/TR 22085-1 are depicted in Figure 1 and are
summarized in Table 1. Details of ITS-S (i.e. V-ITS-S, P-ITS-S, and C-ITS-S) are specified in ISO 21217.
Figure 1 — Conceptual aspects of the general use cases
Table 1 — Use cases clusters and associated use cases overview
Title of use cases cluster Brief description
1. Pre-trip This cluster specifies the detailed use cases of pre-trip stage for MM. It includes 5
different use cases:
3
© ISO 2021 – All rights reserved PROOF/ÉPREUVE
---------------------- Page: 9 ----------------------
ISO 22085-3:2021(E)
Table 1 (continued)
Title of use cases cluster Brief description
— UC 1.1 – MM information providing services
— UC 1.2 – Navigation service linked information on charging station
— UC 1.3 – Pre-scanning available parking space service
— UC 1.4 – MM sharing service
— UC 1.5 – MM as an integrated mobility service
2. En-route This cluster specifies the detailed use cases of the en-route stage for MM. It includes
7 different use cases.
— UC 2.1 – Traffic information providing service
— UC 2.2 – MM status monitoring service
— UC 2.3 – Mobile tolling service
— UC 2.4 – Adaptive route management service
— UC 2.5 – Searching available parking space service on the way
— UC 2.6 – Keyless go service for shared micro mobility
— UC 2.7 – Interconnected transfer information providing service
3. Post-trip This cluster specifies the detailed use cases of post-trip stage for MM. It includes 4
different use cases.
— UC 3.1 – MM driving information providing service
— UC 3.2 – Charging station information service
— UC 3.3 – Parked MM position providing service
— UC 3.4 – Sharing MM return service
4.2 Message overview
DXMs regarding the use cases defined in ISO/TR 22085-1 are summarized in Table 2.
Table 2 — DXMs for mobility service using MM
ID DXM name Exe Description
1 request-mm-status P Request V-ITS-S to notify MM status with SOC, DTC, mile-
age, V-ITS-S-ID.
2 mm-status-response V Send MM status information (V-ITS-S-ID, SOC, DTC, mile-
age) to P-ITS-S.
3 stop-notify-mm-status P Stop sending MM status information to P-ITS-S.
4 notify-mm-service P Send MM status information, V-ITS-S-ID, position and user
information to C-ITS-S. After the first contact, send only the
P-ITS-S position, MM status information and V-ITS-S-ID in
a predefined time interval.
5 stop-notify-mm-service P Stop the communication to the C-ITS-S.
6 charging-station-information C Send charging station location to P-ITS-S.
7 parking-space-information C Send parking location information to P-ITS-S.
4
PROOF/ÉPREUVE © ISO 2021 – All rights reserved
---------------------- Page: 10 ----------------------
ISO 22085-3:2021(E)
Table 2 (continued)
ID DXM name Exe Description
8 reservation-information C Send sharing service reservation information to P-ITS-S.
9 public-transit-schedule C Send public transit information with arrival/departure
time and transit type to P-ITS-S.
10 public-transit-reserved-informa- C Send reserved information to P-ITS-S.
tion
11 navigation-route-information C Send navigation route information to P-ITS-S.
12 traffic-information C Send traffic information to ND (P-ITS-S) from server (C-ITS-S).
13 accident-information C Send accident information from server (C-ITS-S) to ND
(P-ITS-S).
14 danger-zone-information C Send danger zone location information to P-ITS-S.
15 warning-message C Send warning message if DTC error has occurred.
16 toll-balance-information C Definition of toll-balance-information.
17 disconnection-warning-message C Send connection lost warning message where connection
between V-ITS-S and P-ITS-S has been disconnected.
18 return-information C Send returning MM information.
19 payment-information C Send sharing service reservation information to P-ITS-S.
20 request-public-transit-schedule P Send public transit schedule request from ND (P-ITS-S)
to server (C-ITS-S).
21 request-public-transit-reservation P Reserve public transit schedule from ND (P-ITS-S) to
server (C-ITS-S).
5 Data structure
5.1 Data structure for request-mm-status
Table 3 shows the data structure for the DXM request-mm-status to request MM status information and
V-ITS-S ID from the ND (P-ITS-S).
Table 3 — Data structure for request-mm-status
ID 1 Request that V-ITS-S notifies MM status with SOC, DTC, mileage
and V-ITS-S-ID.
name
request-mm-status
exec P-ITS-S
5.2 Data structure for mm-status-response
Table 4 shows the data structure for the DXM mm-status-response to send MM status information to
the ND (P-ITS-S).
5
© ISO 2021 – All rights reserved PROOF/ÉPREUVE
Msg
Data structure
---------------------- Page: 11 ----------------------
ISO 22085-3:2021(E)
Table 4 — Data structure for mm-status-response
ID 2 Send MM status information (V-ITS-S-ID, SOC, DTC, mileage) to
the P-ITS-S
name mm-status-response
exec V-ITS-S
5.3 Data structure for stop-notify-mm-status
Table 5 shows the data structure for the DXM stop-notify-mm-status to stop the communication from
the vehicle (V-ITS-S).
Table 5 — Data structure for stop-notify-mm-status
ID 3 Stop sending MM status information to the P-ITS-S.
name stop-notify-mm-status
exec P-ITS-S
5.4 Data structure for notify-mm-service
Table 6 shows the data structure for the DXM notify-mm-service to send MM status information, V-ITS-
S-ID, position, user information from the P-ITS-S to the C-ITS-S.
6
PROOF/ÉPREUVE © ISO 2021 – All rights reserved
Msg Msg
Data structure Data structure
---------------------- Page: 12 ----------------------
ISO 22085-3:2021(E)
Table 6 — Data structure for notify-mm-service
ID 4 Send MM status information, V-ITS-S-ID, position and user infor-
mation to the C-ITS-S. After the first contact, send only the P-ITS-S
name notify-mm-service
position, MM status information and V-ITS-S-ID in a predefined
time interval.
exec P-ITS-S
5.5 Data structure for stop-notify-mm-service
Table 8 shows the data structure for the DXM stop-notify-mm-service to send MM status information,
V-ITS-S-ID, position and user information from the P-ITS-S to the C-ITS-S.
7
© ISO 2021 – All rights reserved PROOF/ÉPREUVE
Msg
Data structure
---------------------- Page: 13 ----------------------
ISO 22085-3:2021(E)
Table 7 — Data structure for stop-notify-mm-service
ID 5 Stop the communication to the C-ITS-S.
name stop-notify-mm-service
exec P-ITS-S
5.6 Data structure for charging-station-information
Table 8 shows the data structure for the DXM charging-station-information to send charging station
location information from the server (C-ITS-S) to the ND (P-ITS-S).
Table 8 — Data structure for charging-station-information
ID 6 Send charging station location to P-ITS-S.
name charging-station-information
exec C-ITS-S
5.7 Data structure for parking-space-information
Table 9 shows the data structure for the DXM parking-space-information to send available parking
space information from the server (C-ITS-S) to the nomadic device (P-ITS-S).
8
PROOF/ÉPREUVE © ISO 2021 – All rights reserved
Msg Msg
Data structure Data structure
---------------------- Page: 14 ----------------------
ISO 22085-3:2021(E)
Table 9 — Data structure for parking-space-information
ID 7 Send parking location information to the P-ITS-S.
name parking-space-information
exec C-ITS-S
5.8 Data structure for reservation-information
Table 10 shows the data structure for the DXM reservation-information to send MM sharing service
reservation information from the server (C-ITS-S) to the ND (P-ITS-S).
Table 10 — Data structure for reservation-information
ID 8 Send sharing service reservation information to the P-ITS-S.
name reservation-information
exec C-ITS-S
9
© ISO 2021 – All rights reserved PROOF/ÉPREUVE
Msg Msg
Data structure Data structure
---------------------- Page: 15 ----------------------
ISO 22085-3:2021(E)
5.9 Data structure for public-transit-schedule
Table 11 shows the data structure for the DXM public-transit-schedule to send public transit schedule
information from the server (C-ITS-S) to the ND (P-ITS-S).
Table 11 — Data structure for public-transit-schedule
ID 9 Send public transit information with arrival/departure time and
transit type to the P-ITS-S.
name public-transit-schedule
exec C-ITS-S
5.10 Data structure for public-transit-reserved-information
Table 12 shows the data structure for the DXM public-transit-reserved-information to send public
transit reservation information from the ND (P-ITS-S) to the server (C-ITS-S).
Table 12 — Data structure for public-transit-reserved-information
ID 10 Send transit reserved information to the P-ITS-S.
name public-transit-reserved-infor-
mation
exec C-ITS-S
10
PROOF/ÉPREUVE © ISO 2021 – All rights reserved
Msg Msg
Data structure Data structure
---------------------- Page: 16 ----------------------
ISO 22085-3:2021(E)
5.11 Data structure for navigation-route-information
Table 13 shows the data structure for the DXM navigation-route-information to send navigation route
information from the server (C-ITS-S) to the ND (P-ITS-S).
Table 13 — Data structure for public-transit-reservation
ID 11 Send navigation route information to the P-ITS-S.
name navigation-route-information
exec C-ITS-S
5.12 Data structure for traffic-information
Table 14 shows the data structure for the DXM traffic-information to send traffic information from the
server (C-ITS-S) to the ND (P-ITS-S).
11
© ISO 2021 – All rights reserved PROOF/ÉPREUVE
Msg
Data structure
---------------------- Page: 17 ----------------------
ISO 22085-3:2021(E)
Table 14 — Data structure for traffic-information
ID 12 Send traffic information to the ND (P-ITS-S) from the server
(C-ITS-S).
name traffic-information
exec C-ITS-S
5.13 Data structure for accident-information
Table 15 shows the data structure for the DXM accident-information to send accident information from
the server (C-ITS-S) to the ND (P-ITS-S).
Table 15 — Data structure for accident-information
ID 13 Send accident information from the server (C-ITS-S) to the ND
(P-ITS-S).
name accident-information
exec C-ITS-S
5.14 Data structure for danger-zone-information
Table 16 shows the data structure for the DXM danger-zone-information to send danger zone
information from the server (C-ITS-S) to the ND (P-ITS-S).
12
PROOF/ÉPREUVE © ISO 2021 – All rights reserved
Msg Msg
Data structure Data structure
---------------------- Page: 18 ----------------------
ISO 22085-3:2021(E)
Table 16 — Data structure for danger-zone-information
ID 14 Send danger zone information from server (C-ITS-S) to the ND
(P-ITS-S).
name danger-zone-information
exec C-ITS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.