Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 5: Extraction of humic substances from aqueous samples

ISO 12782-5:2012 specifies a procedure to determine the concentration of humic substances in aqueous samples. These samples may be obtained as such or as eluates from leaching procedures applied to soil or other materials. Other materials also include waste.The content of humic substances can be used as input in geochemical models.

Qualité du sol — Paramètres pour la modélisation géochimique de la lixiviation et de la spéciation des constituants des sols et des matériaux — Partie 5: Extraction des substances humiques des échantillons aqueux

L'ISO 12782-5:2012 spécifie un mode opératoire pour déterminer la concentration des substances humiques dans les échantillons aqueux. Ces échantillons peuvent être obtenus en l'état ou sous forme d'éluats par des modes opératoires de lixiviation appliqués au sol ou aux autres matériaux. Les autres matériaux incluent également les déchets. La teneur en substances humiques peut être utilisée comme une donnée d'entrée dans les modèles géochimiques.

General Information

Status

Published

Publication Date

31-May-2012

ICS

13.080.05 - Examination of soils in general

Technical Committee

ISO/TC 190/SC 7 - Impact assessment

Drafting Committee

ISO/TC 190/SC 7/WG 6 - Transfer and mobility of components

Current Stage

9093 - International Standard confirmed

Completion Date

16-Oct-2023

Ref Project

Relations

Consolidates

ISO 21389:2004 - Oil of gum turpentine, Chinese (mainly from Pinus massoniana Lamb.)

Effective Date

06-Jun-2022

Buy Standard

ISO 12782-5:2012 - Soil quality -- Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials

Standard

ISO 12782-5:2012 - Soil quality -- Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials

English language

20 pages

sale 15% off

Preview

sale 15% off

Preview

ISO 12782-5:2012 - Qualité du sol -- Parametres pour la modélisation géochimique de la lixiviation et de la spéciation des constituants des sols et des matériaux

Standard

ISO 12782-5:2012 - Qualité du sol -- Parametres pour la modélisation géochimique de la lixiviation et de la spéciation des constituants des sols et des matériaux

French language

20 pages

sale 15% off

Preview

sale 15% off

Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 12782-5
First edition
2012-06-01
Soil quality — Parameters for geochemical
modelling of leaching and speciation of
constituents in soils and materials —
Part 5:
Extraction of humic substances from
aqueous samples
Qualité du sol — Paramètres pour la modélisation géochimique de la
lixiviation et de la spéciation des constituants des sols et des matériaux —
Partie 5: Extraction des substances humiques des échantillons aqueux
Reference number
ISO 12782-5:2012(E)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 12782-5:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12782-5:2012(E)
Contents Page
Foreword .iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 3
5 Apparatus . 3
6 Reagents . 3
7 Sampling . 4
7.1 Laboratory sample . 4
7.2 Test sample . 4
7.3 Test portion . 4
8 Procedure . 4
8.1 Preparation of DAX-8 resin . 4
8.2 Determination of total humic acid (HA), fulvic acid (FA) and hydrophilic organic carbon (Hy)
content in aqueous samples . 5
9 Eluate treatment and storage . 5
10 Analytical determination . 5
11 Blank test . 5
12 Calculation . 6
12.1 General correction factors for the calculation of humic acid (HA), fulvic acid (FA), hydrophilic
organic carbon (Hy) and hydrophobic neutral organic carbon (HON) in aqueous samples . 6
12.2 Concentration of total humic acid (HA), fulvic acid (FA), hydrophilic organic carbon (Hy) and
hydrophobic neutral organic carbon (HON) concentrations in aqueous samples . 7
13 Expre
...

NORME ISO
INTERNATIONALE 12782-5
Première édition
2012-06-01
Qualité du sol — Paramètres pour
la modélisation géochimique de la
lixiviation et de la spéciation des
constituants des sols et des matériaux —
Partie 5:
Extraction des substances humiques des
échantillons aqueux
Soil quality — Parameters for geochemical modelling of leaching and
speciation of constituents in soils and materials —
Part 5: Extraction of humic substances from aqueous samples
Numéro de référence
ISO 12782-5:2012(F)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 12782-5:2012(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2012
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l’accord écrit
de l’ISO à l’adresse ci-après ou du comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2012 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 12782-5:2012(F)
Sommaire Page
Avant-propos .iv
Introduction . v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 3
5 Appareillage . 3
6 Réactifs . 4
7 Échantillonnage . 4
7.1 Échantillon pour laboratoire . 4
7.2 Échantillon pour essai . 4
7.3 Prise d’essai . 4
8 Mode opératoire . 5
8.1 Préparation de la résine DAX-8 . 5
8.2 Détermination de la teneur totale en acides humiques (HA), acides fulviques (FA) et carbone
organique hydrophile (Hy) dans les échantillons aqueux . 5
9 Traitement et conservation des éluats . 6
10 Dosage analytique . 6
11 Essai à blanc . 6
12 Calcul . 6
12.1 Facteurs de correction généraux pour les calculs des acides humiques (HA), des acides
fulviques (FA), du carbone organique hydrophile (Hy) et du carbone organique neutre
hydrophobe (HON) dans les échantillons aqueux . 6
12.2 Concentrations des acides humiques (HA), des acides fulviques (FA), du carbone organique
hydrophile (Hy) et du carbone organique n
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO

ISO 18400-301:2023(Main)

Soil quality — Sampling — Part 301: Sampling and on site semi-quantitative determinations of volatile organic compounds in field investigations

This document provides specific requirements and recommendations on soil sampling and semi-quantitative measurements in field investigations for volatile organic compounds (VOCs) that are not explicitly covered in the existing ISO 18400 series. In addition, it provides information on the preparation steps (choosing a sampling strategy, defining a sampling plan); describes sampling techniques (drilling techniques, sampling devices and procedures) and field measurements; and gives advice on conservation, packaging, transport and delivery to the laboratory in the context of VOCs (see soil sampling process described in Figure 2). VOCs to which this document can be applied include: — volatile aromatic hydrocarbons such as benzene, toluene, ethylbenzene, naphthalene; — aliphatic ethers such as methyl tert.-butyl ether(MTBE), ethyl tert.-butyl ether (ETBE) and tert.-amyl methyl ether (TAME); — volatile halogenated hydrocarbons such as tetrachloroethene and, trichloroethene. The document does not cover the volatile non-organic compounds. However, some information about these is provided in Annex D. This document provides requirements and guidance on the selection of drilling and sampling techniques for determining VOCs and how to use them. It clarifies the applicability and limits of the drilling and sampling techniques, taking into account the physical, chemical or biological reactions that can occur in soil. This document gives requirements and recommendations on the use of instrumental measurement techniques for determination of VOC concentrations in air, firstly in relation to worker safety, and subsequently for semi-quantitative measurements of volatiles during soil sampling. The following subjects are outside the scope of this document: — direct quantitative measurement of volatile compounds by field analysis laboratories; — investigations and evaluation of soil gas quality (these are dealt with ISO 18400 204); — safety risk assessment; and — analytical procedures.

Standard
52 pages
English language
sale 15% off
Standard
54 pages
French language
sale 15% off
Draft
52 pages
English language
sale 15% off
Draft
52 pages
English language
sale 15% off
Draft
56 pages
French language
sale 15% off

ISO

ISO 21268-4:2019(Main)

Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials — Part 4: Influence of pH on leaching with initial acid/base addition

This document specifies a test to obtain information on the short- and long-term leaching behaviour and characteristic properties of materials. The document has been developed to measure the pH-dependent release of inorganic and organic substances from soil and soil-like material as well as to produce eluates for subsequent ecotoxicological testing. For ecotoxicological testing, see ISO 15799 and ISO 17616. The equilibrium condition, as defined in this document, is established by the addition of predetermined amounts of acid or base to reach desired final pH values. NOTE 1 Volatile organic substances include the low molecular weight substances in mixtures such as mineral oil. NOTE 2 It is not always possible to optimize test conditions simultaneously for inorganic and organic substances and optimum test conditions can also vary between different groups of organic substances. Test requirements for organic substances are generally more stringent than those for inorganic substances. The test conditions suitable for measuring the release of organic substances will generally also be applicable to inorganic substances. NOTE 3 Within the category of organic substances, a significant difference in behaviour exists between the more polar, relatively water-soluble compounds and apolar, hydrophobic organic substances (HOCs). In the latter case, mechanisms of release (e.g. particle-bound or dissolved organic carbon-bound) can be more crucial as well as sorption losses of soluble HOCs on different materials with which they come in contact (e.g. bottles, filters). The test and the results should be used for leaching of organic substances only with thorough consideration of the specific properties of the substances in question and the associated potential problems. NOTE 4 For ecotoxicological testing, eluates representing the release of both inorganic and organic substances are needed. In this document, ecotoxicological testing is meant to include genotoxicological testing. The test method produces eluates, which can subsequently be characterized by physical, chemical and ecotoxicological methods in accordance with existing standard methods. The test is not suitable for substances that are volatile under ambient conditions. For the purposes of ecotoxicological tests, the relevant pH range (see 8.2) will usually be pH 5 to pH 9. This test is mainly aimed at being used for routine and control purposes, and it cannot be used alone to describe all leaching properties of a soil. Additional leaching tests are needed for that extended goal. This document does not address issues related to health and safety. It only determines the leaching properties outlined in Clause 5.

Standard
31 pages
English language
sale 15% off
Standard
33 pages
French language
sale 15% off

ISO

ISO 21268-3:2019(Main)

Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials — Part 3: Up-flow percolation test

This document specifies a test, which is aimed at determining the leaching behaviour of inorganic and organic substances from a soil and soil-like materials. The method is a once-through up-flow percolation test under standardized conditions of flow rate. The material is leached under dynamic hydraulic conditions. The document has been developed to measure the release of inorganic and organic substances from soil and soil-like material as well as to produce eluates for subsequent ecotoxicological testing. For ecotoxicological testing, see ISO 15799[6] and ISO 17616[7]. The test results enable the distinction between different release patterns, for instance wash-out and release under the influence of interaction with the matrix, when approaching local equilibrium between material and leachant. This test method produces eluates, which can subsequently be characterized by physical, chemical and ecotoxicological methods in accordance with existing standard methods. The results of eluate analysis are presented as a function of the liquid/solid (L/S) ratio. The test is not suitable for substances that are volatile under ambient conditions. NOTE 1 Volatile organic substances include the low-molecular-weight substances in mixtures such as mineral oil. NOTE 2 It is not always possible to optimize test conditions simultaneously for inorganic and organic substances and optimum test conditions can also vary between different groups of organic substances. Test requirements for organic substances are generally more stringent than those for inorganic substances. The test conditions suitable for measuring the release of organic substances will generally also be applicable to inorganic substances. NOTE 3 Within the category of organic substances, a significant difference in behaviour exists between the more polar, relatively water-soluble compounds and apolar, hydrophobic organic substances (HOCs). In the latter case, mechanisms of release (e.g. particle-bound or dissolved organic carbon-bound) can be more crucial as well as sorption losses of soluble HOCs on different materials with which they come in contact (e.g. bottles, filters). The test and the results should be used for leaching of organic substances only with thorough consideration of the specific properties of the substances in question and the associated potential problems. NOTE 4 For ecotoxicological testing, eluates representing the release of both inorganic and organic substances are needed. In this document, ecotoxicological testing is also meant to include genotoxicological testing. NOTE 5 The test is generally not suitable for soils with hydraulic conductivities below 10−8 m/s (see also Annex B). It can be difficult to maintain the designated flow rate already in the range of saturated hydraulic conductivity between 10−7 m/s and 10−8 m/s. The application of this test method alone is not sufficient for the determination of the leaching behaviour of a material under specified conditions different to those from the test procedure, since this generally requires the application of several test methods, behavioural modelling and model validation. This document does not address issues related to health and safety. It only determines the leaching properties as outlined in Clause 4.

Standard
34 pages
English language
sale 15% off
Standard
35 pages
French language
sale 15% off

ISO

ISO 21268-1:2019(Main)

Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials — Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter

This document specifies a test providing information on leaching of soil and soil-like materials under the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 2 l/kg dry matter. The document has been developed to measure the release of inorganic and organic substances from soil and soil-like material as well as to produce eluates for subsequent ecotoxicological testing. For ecotoxicological testing, see ISO 15799[6] and ISO 17616[7]. NOTE 1 Volatile organic substances include the low-molecular-weight substances in mixtures such as mineral oil. NOTE 2 It is not always possible to optimise test conditions simultaneously for inorganic and organic substances and optimum test conditions can also vary between different groups of organic substances. Test requirements for organic substances are generally more stringent than those for inorganic substances. The test conditions suitable for measuring the release of organic substances will generally also be applicable to inorganic substances. NOTE 3 Within the category of organic substances, a significant difference in behaviour exists between the more polar, relatively water-soluble compounds and apolar, hydrophobic organic substances (HOCs). In the latter case, mechanisms of release (e.g. particle-bound or dissolved organic carbon-bound) can be more crucial as well as sorption losses of soluble HOCs on different materials with which they come in contact (e.g. bottles, filters). The test and the results should be used for leaching of organic substances only with thorough consideration of the specific properties of the substances in question and the associated potential problems. NOTE 4 For ecotoxicological testing, eluates representing the release of both inorganic and organic substances are needed. In this document, ecotoxicological testing is also meant to include genotoxicological testing. This test method produces eluates, which can subsequently be characterized by physical, chemical and ecotoxicological methods in accordance with existing standard methods. The test is not suitable for substances that are volatile under ambient conditions. This procedure is not applicable to materials with a dry-matter-content ratio lower than 33 %. This test is mainly aimed at being used for routine and control purposes, and it cannot be used alone to describe all leaching properties of a soil. Additional leaching tests are needed for that extended goal. This document does not address issues related to health and safety. It only determines the leaching properties as outlined in Clause 4.

Standard
27 pages
English language
sale 15% off
Standard
27 pages
French language
sale 15% off

ISO

ISO 21268-2:2019(Main)

Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials — Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter

This document specifies a test providing information on leaching of soil and soil materials under the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 10 l/kg dry matter. The document has been developed to measure the release of inorganic and organic substances from soil and soil-like material as well as to produce eluates for subsequent ecotoxicological testing. For ecotoxicological testing, see ISO 15799[6] and ISO 17616[7]. NOTE 1 Volatile organic substances include the low-molecular-weight substances in mixtures such as mineral oil. NOTE 2 It is not always possible to optimize test conditions simultaneously for inorganic and organic substances and optimum test conditions can also vary between different groups of organic substances. Test requirements for organic substances are generally more stringent than those for inorganic substances. The test conditions suitable for measuring the release of organic substances will generally also be applicable to inorganic substances. NOTE 3 Within the category of organic substances, a significant difference in behaviour exists between the more polar, relatively water-soluble compounds and apolar, hydrophobic organic substances (HOCs). In the latter case, mechanisms of release (e.g. particle-bound or dissolved organic carbon-bound) can be more crucial as well as sorption losses of soluble HOCs on different materials with which they come in contact (e.g. bottles, filters). The test and the results should be used for leaching of organic substances only with thorough consideration of the specific properties of the substances in question and the associated potential problems. NOTE 4 For ecotoxicological testing, eluates representing the release of both inorganic and organic substances are needed. In this document, ecotoxicological testing is also meant to include genotoxicological testing. This test method produces eluates, which can subsequently be characterized by physical, chemical and ecotoxicological methods in accordance with existing standard methods. The test is not suitable for substances that are volatile under ambient conditions. This procedure is not applicable to materials with a dry-matter-content ratio lower than 33 %. This test is mainly aimed at being used for routine and control purposes, and it cannot be used alone to describe all leaching properties of a soil. Additional leaching tests are needed for that extended goal. This document does not address issues related to health and safety. It only determines the leaching properties as outlined in Clause 4.

Standard
27 pages
English language
sale 15% off
Standard
27 pages
French language
sale 15% off

ISO

ISO 18400-205:2018(Main)

Soil quality — Sampling — Part 205: Guidance on the procedure for investigation of natural, near-natural and cultivated sites

SIST ISO 18400-205:2019

This document provides guidance on the sampling of soils of — natural and near-natural sites, — natural arboreal areas including forests and woods, — areas used for agriculture (arable and pasture sites), — areas used for horticulture (including domestic gardens, allotments), and — areas used for special crop-cultivation, orchards, vineyards, commercial plantations and forests, etc. It is applicable to — soil investigations and evaluations in the field, and — collection of samples for chemical, geochemical, physical, and biological characterization of soil and soil materials in the laboratory. This document sets out appropriate strategies for the design of sampling programmes, field procedures and subsequent treatment of samples for transport and storage prior to sample pretreatment (e.g. drying, milling). It is intended to be used in conjunction with the other parts of the ISO 18400 series. Attention is, in particular, drawn to the requirements concerning collection, handling and storage of soil for assessment of biological functions in ISO 18400-206. NOTE 1 Groundwater and surface water can be adversely impacted by agricultural and related activities, such as nitrates and pesticides, and by translocation of soil particles. In turn, knowledge about water quality can provide information about possible sources of groundwater contamination or contaminating run-off. Investigation of groundwater and surface water quality is outside of the scope of this document; relevant guidance is given in the ISO 5667 series of standards. ISO 15175 provides guidance on the relationship between soil properties and groundwater quality. NOTE 2 It could also be appropriate to investigate ambient air, vegetation, potable water supplies and a variety of other media depending on the findings of the preliminary investigation.

Standard
21 pages
English language
sale 10% off
e-Library read for
1 day
Standard
15 pages
English language
sale 15% off
Standard
16 pages
French language
sale 15% off

ISO

ISO 18400-104:2018(Main)

Soil quality — Sampling — Part 104: Strategies

SIST ISO 18400-104:2019

This document gives general guidance on the development of site investigation strategies and detailed guidance on the development of sampling strategies, when collecting information on — the average properties of soil, — the variability of soil properties, and — the spatial distribution of soil properties. It is applicable to soil samples intended for chemical testing and determination of a variety of other properties (e.g. physical). Although the main focus of this document is the collection of material (field samples) for transfer to a laboratory for testing, it is also applicable when measurements are made directly in the field. NOTE 1 This document also provides information on the statistical principles underlying the development of appropriate sampling strategies and statistical methodologies. NOTE 2 Guidance on other forms of related sampling activities are given in other International Standards [for soil gas (ISO 18400-204) and for biological testing purposes (ISO 18400-206)]. Guidance on sampling groundwater is provided in ISO 5667-11 and ISO 5667-22 and on sampling methods and groundwater measurements in geotechnical investigations in ISO 22475-1.

Standard
139 pages
English language
sale 10% off
e-Library read for
1 day
Standard
131 pages
English language
sale 15% off
Standard
146 pages
French language
sale 15% off
Draft
159 pages
English language
sale 10% off
e-Library read for
1 day

ISO

ISO 18400-203:2018(Main)

Soil quality — Sampling — Part 203: Investigation of potentially contaminated sites

SIST ISO 18400-203:2019

This document gives guidance on the: — investigation of sites, where either it is known that soil contamination is present, or the presence of soil contamination is suspected; — investigation of sites where no soil contamination is expected, but the soil quality is to be determined (e.g. to make sure that there is no contamination present); — investigation in anticipation of a need to manage re-use or disposal of excavated soil which might be contaminated; — collection of information that is necessary for risk assessment and/or the development of remedial action plans (e.g. whether remediation is required and suggestions as to how this might be best achieved). Although the information on soil quality for the risk assessment and/or the development of remedial action plans is gathered by applying this document, it does not give guidance on the decisions and actions that follow from a site investigation, for example, risk assessment and decisions about the requirements for remediation (if any).

Standard
39 pages
English language
sale 10% off
e-Library read for
1 day
Standard
32 pages
English language
sale 15% off
Standard
34 pages
French language
sale 15% off

ISO

ISO 18400-202:2018(Main)

Soil quality — Sampling — Part 202: Preliminary investigations

SIST ISO 18400-202:2019

This document provides guidance on the design and execution of preliminary investigations comprising desk studies and site reconnaissance, and where appropriate, preliminary risk assessment. It is applicable whenever sampling exercises or investigations are to be carried out to determine soil quality.

Standard
40 pages
English language
sale 10% off
e-Library read for
1 day
Standard
34 pages
English language
sale 15% off
Standard
36 pages
French language
sale 15% off

ISO

ISO 18400-100:2017(Main)

Soil quality — Sampling — Part 100: Guidance on the selection of sampling standards

SIST ISO 18400-100:2018

ISO 18400-100:2017 describes the structure of sampling standards for any kind of soil investigation. It also describes the coherence of the different parts in the ISO 18400 series. It provides guidance on the selection of sampling standards appropriate for the objectives of users.

Standard
8 pages
English language
sale 10% off
e-Library read for
1 day
Standard
4 pages
English language
sale 15% off
Standard
5 pages
French language
sale 15% off