ISO 45004

Occupational health and safety management — Guidelines on performance evaluation

Management de la santé et de la sécurité au travail — Lignes directrices relative à l'évaluation des performances

Sistem vodenja varnosti in zdravja pri delu - Smernice za ocenjevanje uspešnosti

General Information

• Status: Not Published
• ICS: 13.100 - Occupational safety. Industrial hygiene
• Technical Committee: ISO/TC 283 - Occupational health and safety management
• Drafting Committee: ISO/TC 283 - Occupational health and safety management
• Current Stage: 6000 - International Standard under publication
• Completion Date: 27-Jan-2024
• Ref Project: kSIST ISO/FDIS 45004:2023 - Occupational health and safety management - Guidelines on performance evaluation

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST ISO/DIS 45004:2023
01-junij-2023
Sistem vodenja varnosti in zdravja pri delu - Smernice za ocenjevanje uspešnosti
Occupational health and safety management - Guidelines on performance evaluation
Titre manque
Ta slovenski standard je istoveten z: ISO/DIS 45004
ICS:
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
oSIST ISO/DIS 45004:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST ISO/DIS 45004:2023

---------------------- Page: 2 ----------------------
oSIST ISO/DIS 45004:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 45004
ISO/TC 283 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-02-09 2023-05-04
Occupational health and safety management — Guidelines
on performance evaluation
ICS: 13.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 45004:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST ISO/DIS 45004:2023
ISO/DIS 45004:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 45004
ISO/TC 283 Secretariat: BSI
Voting begins on: Voting terminates on:

Occupational health and safety management — Guidelines
on performance evaluation
ICS: 13.100
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 45004:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST ISO/DIS 45004:2023
ISO/DIS 45004:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Performance evaluation .2
4.1 What performance evaluation is .
...

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 45004
ISO/TC 283
Occupational health and safety
Secretariat: BSI
management — Guidelines on
Voting begins on:
2023-12-01 performance evaluation
Voting terminates on:
2024-01-26
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 45004:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 45004:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 45004
ISO/TC 283
Occupational health and safety
Secretariat: BSI
management — Guidelines on
Voting begins on:
performance evaluation
Voting terminates on:
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 45004:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 45004:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Performance evaluation .2
4.1 General . 2
4.2 Why performance evaluation is important . 2
5 Performance evaluation process .2
5.1 General . 2
5.2 Elements of a performance evaluation process . 3
5.3 Performance evaluation sources of information and tools . 3
5.3.1 General . 3
5.3.2 Insp
...

© ISO 2023 – All rights reserved
ISO/FDIS 45004:2023(E)
Date: 2023-10-1211-17
ISO/TC 283/WG 4
Secretariat: BSI
Occupational health and safety management — Guidelines on
performance evaluation

FDIS stage

---------------------- Page: 1 ----------------------
ISO/FDIS 45004:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of
this publication may be reproduced or utilized otherwise in any form or by any means, electronic or
mechanical, including photocopying, or posting on the internet or an intranet, without prior written
permission. Permission can be requested from either ISO at the address below or ISO’s member body in the
country of the requester.
ISO Copyright Office
CP 401 • CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: [e-mail]
Website: www.iso.org
Published in Switzerland.
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/FDIS 45004:2023(E)
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Performance evaluation . 2
4.1 General . 2
4.2 Why performance evaluation is important . 2
5 Performance evaluation process . 2
5.1 General . 2
5.2 Elements of a performance evaluation process . 3
5.3 Performance evaluation sources of information and tools . 3
5.3.1 General . 3
5.3.2 Inspections . 4
5.3.3 Pre-activity and post-activity reviews . 4
5.3.4 Exposure assessments and occupational health surveillance . 5
5.3.5 Health and safety meetings . 5
5.3.6 Focus groups . 5
5.3.7 Surveys . 6
5.3.8 Interviews . 6
5.3.9 Injury and ill health tracking . 7
5.3.10 Incident investigations . 7
5.3.11 Audits . 7
5.3.12 Management review . 7
6 Performance indicators . 8
6.1 General . 8
6.2 Selection of performance indicators .
...