ISO 10721-2:1999

Steel structures — Part 2: Fabrication and erection

This part of ISO 10721 specifies the requirements for the fabrication, erection and inspection of structural steelwork in buildings designed in accordance with ISO 10721-1, including steelwork in composite steel and concrete structures. This part of ISO 10721 is also applicable to bridges, off-shore and other civil engineering and related structures, but for such structures it may be necessary to consider other requirements. NOTE For welded connections and for structures subject to fatigue, special considerations regarding scope and field of application are presented in 8.9 and 10.1 respectively of ISO 10721-1.

Structures en acier — Partie 2: Fabrication et montage

General Information

• Status: Withdrawn
• Publication Date: 05-May-1999
• ICS: 91.080.10 - Metal structures
• ICS: 91.080.13 - Steel structures
• Technical Committee: ISO/TC 167/SC 2 - Steel: Fabrication and erection
• Drafting Committee: ISO/TC 167/SC 2 - Steel: Fabrication and erection
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 08-Dec-2023

Relations

• Corrected By: ISO 10721-2:1999/Cor 1:1999 - Steel structures — Part 2: Fabrication and erection — Technical Corrigendum 1
• Effective Date: 28-Dec-2008
• Revised: ISO 17607-2:2023 - Steel structures — Execution of structural steelwork — Part 2: Steels
• Effective Date: 24-Dec-2022
• Revised: ISO 17607-5:2023 - Steel structures — Execution of structural steelwork — Part 5: Welding
• Effective Date: 24-Dec-2022
• Revised: ISO 17607-6:2023 - Steel structures — Execution of structural steelwork — Part 6: Bolting
• Effective Date: 24-Dec-2022
• Revised: ISO 17607-3:2023 - Steel structures — Execution of structural steelwork — Part 3: Fabrication
• Effective Date: 24-Dec-2022
• Revised: ISO 17607-4:2023 - Steel structures — Execution of structural steelwork — Part 4: Erection
• Effective Date: 24-Dec-2022
• Revised: ISO 17607-1:2023 - Steel structures — Execution of structural steelwork — Part 1: General requirements and terms and definitions
• Effective Date: 24-Dec-2022
• Parent: ISO 10721-2:1999/Cor 1:1999 - Steel structures — Part 2: Fabrication and erection — Technical Corrigendum 1
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10721-2
First edition
1999-05-01
Corrected and reprinted
2000-09-15
Steel structures —
Part 2:
Fabrication and erection
Structures en acier —
Part 2: Fabrication et montage
A
Reference number
ISO 10721-2:1999(E)

---------------------- Page: 1 ----------------------
ISO 10721-2:1999(E)
Contents
1 Scope .1
2 Normative references .1
3 Materials .2
4 Fabrication workmanship .3
4.1 Material identification.3
4.2 Bending and pressing .3
4.3 Straightening and flattening.3
4.4 Forging.3
4.5 Preparation of edges, ends and surfaces .3
4.6 Holes for bolts and pins.4
4.7 Bolts, nuts and washers .5
4.8 Welding.8
5 Fabrication tolerances.13
5.1 General.13
5.2 Cross-section of rolled sections .14
5.3 Cross-section of members fabricated from plates (or built up from sections).14
5.4 Length.17
5.5 Straightness in both axes .17
5.6 Camber.17
6 Erection.18
6.1 Accuracy of construction .18
6.2 Marking for erection .18
6.3 Delivery, storage and handling .18
©  ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
© ISO
ISO 10721-2:1999(E)
6.4 Erection of structural steelwork. 18
6.5 Alignment . 18
6.6 Protective treatment — Site app
...