ISO 17607-5:2023

Steel structures — Execution of structural steelwork — Part 5: Welding

This document defines the general requirements for welding in the execution of structural steelwork as structures or as manufactured components in conjunction with ISO 17607-1. Additional requirements to be addressed in the execution of structural steelwork, as structures or as fabricated components, can be found in other parts of the ISO 17607 series.

Structures en acier – Exécution des charpentes et ossatures en acier — Partie 5: Soudage

General Information

• Status: Published
• Publication Date: 07-Dec-2023
• ICS: 25.160.01 - Welding, brazing and soldering in general
• ICS: 91.080.13 - Steel structures
• Technical Committee: ISO/TC 167 - Steel and aluminium structures
• Drafting Committee: ISO/TC 167/WG 3 - Execution of steel structures
• Current Stage: 6060 - International Standard published
• Start Date: 08-Dec-2023
• Due Date: 11-Feb-2023
• Completion Date: 08-Dec-2023

Relations

• Revises: ISO 10721-2:1999 - Steel structures — Part 2: Fabrication and erection
• Effective Date: 24-Dec-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17607-5
First edition
2023-12
Steel structures — Execution of
structural steelwork —
Part 5:
Welding
Structures en acier – Exécution des charpentes et ossatures en
acier —
Partie 5: Soudage
Reference number
ISO 17607-5:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 17607-5:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17607-5:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 3
4 Execution specification and quality requirements . 3
5 Constituent products . 3
5.1 General . 3
5.2 Welding consumables . 4
5.3 Stud welding . 4
6 Welding . 4
6.1 General . 4
6.2 Welding plan . 5
6.2.1 Requirements for a welding plan . 5
6.2.2 Content of a welding plan . 5
6.3 Welding processes . 5
6.4 Qualification of welding procedures and welding personnel . 6
6.4.1 Qualification of welding procedures . 6
6.4.2 Welders and welding operators . 7
6.4.3 Welding coordination .
...