ISO 10360-1:2000/Cor 1:2002

Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary — Technical Corrigendum 1

Spécification géométrique des produits (GPS) — Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) — Partie 1: Vocabulaire — Rectificatif technique 1

Specifikacije geometrijskih veličin izdelka - Preskusi za sprejemljivost in ponovno verifikacijo koordinatnih merilnih strojev - 1. del: Slovar - Tehnični popravek 1

General Information

• Status: Published
• Publication Date: 19-Nov-2002
• ICS: 01.040.17 - Metrology and measurement. Physical phenomena (Vocabularies)
• ICS: 17.040.30 - Measuring instruments
• Technical Committee: ISO/TC 213 - Dimensional and geometrical product specifications and verification
• Drafting Committee: ISO/TC 213/WG 10 - Coordinate measuring machines
• Current Stage: 6060 - International Standard published
• Completion Date: 20-Nov-2002
• Ref Project: SIST ISO 10360-1:2002/TC 1:2003 - ISO 10360-1:2000/Cor 1:2002

Relations

• Child: ISO 10360-1:2000 - Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary
• Effective Date: 15-Apr-2008
• Child: SIST ISO 10360-1:2002 - Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 1: Vocabulary
• Effective Date: 12-May-2008
• Corrects: ISO 10360-1:2000 - Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary
• Effective Date: 06-Jun-2022

Standards Content (Sample)

SIST ISO 10360-1:2002/TC 1:2003SLOVENSKIjulij 2003
STANDARDSpecifikacije geometrijskih veličin izdelka - Preskusi za sprejemljivost in ponovno verifikacijo koordinatnih merilnih strojev - 1. del: Slovar - Tehnični popravek 1Geometrical Product Specifications (GPS) -
Acceptance and reverification test for coordinate
measuring machines (CMM) - Part 1: Vocabulary - Technical Corrigendum 1©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST ISO 10360-1:2002/TC 1:2003(en,fr)ICS01.040.17; 17.040.30



SIST ISO 10360-1:2002/TC 1:2003



ICS
01.040.17;
17.040.30 Ref. No./Réf. no ISO 10360-1:2000/Cor.1:2002(E/F)© ISO 2002 – All rights reserved/Tous droits réservés Published in Switzerland/Publié en Suisse
INTERNATIONAL STANDARD ISO 10360-1:2000 TECHNICAL CORRIGENDUM 1 NORME INTERNATIONALE ISO 10360-1:2000 RECTIFICATIF TECHNIQUE 1 Published/Publié 2002-11-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION •
• ORGANISATION INTERNATIONALE DE NORMALISATION
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary TECHNICAL CORRIGENDUM 1 Spécification géométrique des produits (GPS) — Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) — Partie 1: Vocabulaire RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO 10360-1:2000 was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product specifications and verification. Le Rectificatif technique 1 à l'ISO 10360-1:2000 a été élaboré par le comité technique ISO/TC 213, Spécifications et vérification dimensionnelles et géométriques des produits.
SIST ISO 10360-1:2002/TC 1:2003



ISO 10360-1:2000/Cor.1:2002(E/F) 2 © ISO 2002 – All rights reserved/Tous droits réservés Page 13, Figure 10
Page 13, Figure 10 Replace the drawing in Figure 10 with the following one.
Replacer le dessin de la Figure 10 par le dessin suivant.
Page 13, definition 6.1
Page 13, définition 6.1 Replace the definition of the term discrete-point probing speed with the following. “magnitude of the velocity of a probing system (2.6) relative to a workpiece when discrete-point probing (2.8)”
Remplacer la déf
...