Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface

This document defines the concept of how to design the connection interfaces for adaptive and tool items, limited to any kind of standardized connections, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of connection interface. Not all dimensions given in this document are defined in the ISO 13399 series. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for other connection interfaces not being described in the scope of this document; — concept of 3D models for adaptive items; — concept of 3D models for assembly items and auxiliary items.

Représentation et échange des données relatives aux outils coupants — Partie 406: Création et échanges de modèles 3D — Conception d'interfaces de connexion

Le présent document spécifie un concept pour la conception d'interfaces de connexion pour les éléments relatifs aux attachements et aux outils, limité à tous les types de connexion normalisés, utilisant les propriétés et domaines de valeurs associés. Le présent document spécifie les exigences de modèles 3D simplifiés pour l'échange de données de l'interface de connexion. Les dimensions indiquées dans le présent document ne sont pas toutes définies dans la série ISO 13399. Les éléments suivants n'entrent pas dans le domaine d'application du présent document: — les applications où les données standards peuvent être stockées ou référencées; — le concept de modèles 3D pour outils coupants; — le concept de modèles 3D pour des éléments coupants; — le concept de modèles 3D pour d'autres éléments relatifs aux outils, non décrits dans le domaine d'application du présent document; — le concept de modèles 3D pour les éléments relatifs aux attachements; — le concept de modèles 3D pour les éléments relatifs aux assemblages et éléments auxiliaires.

General Information

Status
Published
Publication Date
09-Jan-2019
Current Stage
9093 - International Standard confirmed
Completion Date
17-Jun-2022
Ref Project

Buy Standard

Technical specification
ISO/TS 13399-406:2019 - Cutting tool data representation and exchange
English language
43 pages
sale 15% off
Preview
sale 15% off
Preview
Technical specification
ISO/TS 13399-406:2019 - Représentation et échange des données relatives aux outils coupants
French language
43 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

TECHNICAL ISO/TS
SPECIFICATION 13399-406
First edition
2019-01
Cutting tool data representation and
exchange —
Part 406:
Creation and exchange of 3D models
— Modelling of connection interface
Représentation et échange des données relatives aux outils
coupants —
Partie 406: Création et échanges de modèles 3D — Conception
d'interfaces de connexion
Reference number
ISO/TS 13399-406:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO/TS 13399-406:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 13399-406:2019(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 2
5 Starting elements, coordinate systems and planes . 3
5.1 General . 3
5.2 Reference system (PCS — Primary coordinate system) . 3
5.3 Position of the connection interface . 4
5.3.1 General. 4
5.3.2 Prismatic connection interface . 4
5.3.3 Round connection interface . 4
5.4 Mounting coordinate system . 4
5.5 Planes . 5
6 Design of the connection interface . 6
7 BFA-drill chuck taper . 6
7.1 General . 6
7.2 Necessary properties . 6
7.3 Contours (sketches) for solid bodies . 7
7.4 Solid bodies of the drill chuck taper . 7
8 CCS-polygonal taper interface with flange contact surface . 9
8.1 General . 9
8.2 Necessary properties . 9
8.3 Contours (sketches) for solid bodies . 9
8.3.1 Outside sketch . 9
8.3.2 Inside sketch .10
8.4 Solid bodies of the polygonal taper .11
8.4.1 Tapered shank .11
8.4.2 Internal contour .11
8.4.3 Flange and tool changer grooves .12
8.4.4 Completed polygonal taper shank .12
8.4.5 Tapered hole of receiver .13
8.4.6 Completed polygonal receiver .13
9 FDA-milling arbour connection .14
9.1 General .14
9.2 Necessary properties .14
9.3 Contours (sketches) for solid bodies .14
9.3.1 Sketch for connection on workpiece side .14
9.3.2 Sketch for connection on machine side .15
9.4 Solid bodies of the connection .16
9.4.1 Solid body for connection on workpiece side .16
9.4.2 Solid body for connection on machine side .16
10 HSK-hollow taper interface with flange contact .17
10.1 General .17
10.2 Necessary properties .18
10.3 Contours (sketches) for solid bodies .18
10.3.1 Outside sketch .18
10.3.2 Inside sketch .19
10.4 Solid bodies of the hollow taper interface with flange contact .19
© ISO 2019 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/TS 13399-406:2019(E)

10.4.1 Solid body for connection on machine side .19
10.4.2 Solid body for connection on workpiece side .20
11 KMT-modular taper interface with ball track system .21
11.1 General .21
11.2 Necessary properties .21
11.3 Contours (sketches) for solid bodies .22
11.3.1 Outside sketch .22
11.3.2 Inside sketch .22
11.4 Solid bodies of the modular taper with ball track system .23
11.4.1 Solid body for connection on machine side .23
11.4.2 Solid body for connection on workpiece side .24
12 MEG/MKG-metric/Morse taper .25
12.1 General .25
12.2 Necessary properties .25
12.3 Contours (sketches) for solid bodies .26
12.3.1 Outside sketch .26
12.3.2 Inside sketch .26
12.4 Solid bodies of the metric or Morse taper .27
12.4.1 Solid body for connection on machine side .27
12.4.2 Solid body for connection on workpiece side .28
13 SKG-tool shanks with 7/24 and steep tapers .29
13.1 General .29
13.2 Necessary properties .29
13.3 Contours (sketches) for solid bodies .30
13.3.1 Outside sketch .30
13.3.2 Inside sketch .31
13.4 Solid bodies of the 7/24 taper .31
13.4.1 Solid body for connection on machine side .31
13.4.2 Solid body for connection on workpiece side .33
14 SZD-collet standard connection .34
14.1 General .34
14.2 Necessary properties .34
14.3 Contour (sketch) for solid body.34
14.4 Solid bodies of the collet receiver .35
15 ZYL-cylindrical shanks .36
15.1 General .36
15.2 Necessary properties .36
15.3 Contours (sketches) for solid bodies .36
15.4 Solid bodies of the cylindrical connections .37
15.4.1 Solid body for connection on machine side .37
15.4.2 Solid body for connection on workpiece side .38
16 ZYV-cylindrical connection for stationary tools — ISO 10889-1 .38
16.1 General .38
16.2 Necessary properties .39
16.3 Contours (sketches) for solid bodies .39
16.4 Solid bodies of the cylindrical connection for stationary tools .39
16.4.1 Solid body for connection on machine side .39
16.4.2 Solid body for connection on workpiece side .40
17 Manufacturer specific connection interfaces .41
18 Structure of the design elements (tree of model) .41
Annex A (informative) Nominal dimensions .42
Bibliography .43
iv © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/TS 13399-406:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 29, Small tools.
A list of all parts in the ISO 13399 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
© ISO 2019 – All rights reserved v

---------------------- Page: 5 ----------------------
ISO/TS 13399-406:2019(E)

Introduction
This document defines the concept, terms and definitions of how to design simplified 3D models of
connection interfaces for the design of cutting tools that can be used for NC-programming, simulation
of the manufacturing processes and the determination of collision within machining processes. It is not
intended to standardize the design of the cutting tool itself.
A cutting tool is used in a machine to remove material from a workpiece by a shearing action at the
cutting edges of the tool. Cutting tool data that can be described by the ISO 13399 series include, but
are not limited to, everything between the workpiece and the machine tool. Information about inserts,
solid tools, assembled tools, adaptors, components and their relationships can be represented by this
document. The increasing demand for providing the end user with 3D models for the purposes defined
above is the basis for the development of this series of International Standards.
The objective of the ISO 13399 series is to provide the means to represent the information that
describes cutting tools in a computer sensible form that is independent from any particular computer
system. The representation will facilitate the processing and exchange of cutting tool data within
and between different software systems and computer platforms and support the application of
this data in manufacturing planning, cutting operations and the supply of tools. The nature of this
description makes it suitable not only for neutral file exchange, but also as a basis for implementing
and sharing product databases and for archiving. The methods that are used for these representations
are those developed by ISO/TC 184, Automation systems and integration, SC 4, Industrial data, for the
representation of product data by using standardized information models and reference dictionaries.
Definitions and identifications of dictionary entries are defined by means of standard data that consist
of instances of the EXPRESS entity data types defined in the common dictionary schema, resulting from
a joint effort between ISO/TC 184/SC 4 and IEC/TC 3/SC 3D, Product properties and classes and their
identification, and in its extensions defined in ISO 13584-24 and ISO 13584-25.
vi © ISO 2019 – All rights reserved

---------------------- Page: 6 ----------------------
TECHNICAL SPECIFICATION ISO/TS 13399-406:2019(E)
Cutting tool data representation and exchange —
Part 406:
Creation and exchange of 3D models — Modelling of
connection interface
1 Scope
This document defines the concept of how to design the connection interfaces for adaptive and tool
items, limited to any kind of standardized connections, together with the usage of the related properties
and domains of values.
This document specifies the requirements of simplified 3D models for data exchange of connection
interface.
Not all dimensions given in this document are defined in the ISO 13399 series.
The following are outside the scope of this document:
— applications where these standard data can be stored or referenced;
— concept of 3D models for cutting tools;
— concept of 3D models for cutting items;
— concept of 3D models for other connection interfaces not being described in the scope of this
document;
— concept of 3D models for adaptive items;
— concept of 3D models for assembly items and auxiliary items.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 296, Machine tools — Self-holding tapers for tool shanks
ISO 239, Drill chuck tapers
ISO 3338 (all parts), Cylindrical shanks for milling cutters
ISO 5414-1, Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 1:
Dimensions of the driving system of tool shanks
ISO 5414-2, Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2:
Connecting dimensions of chucks and designation
ISO 6462, Face and shoulder milling cutters with indexable inserts — Dimensions
ISO 7388 (all parts), Tool shanks with 7/24 taper for automatic tool changers
ISO 9270-1, 7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of
spindle noses of forms S and SF
© ISO 2019 – All rights reserved 1

---------------------- Page: 7 ----------------------
ISO/TS 13399-406:2019(E)

ISO 9270-2, 7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of
spindle noses of forms J and JF
ISO 9766, Drills with indexable inserts — Cylindrical shanks with a parallel flat
ISO 10649-1, Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
ISO 10897, Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts
ISO 10889 (all parts), Tool holders with cylindrical shank
ISO 12164-1, Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions
ISO 12164-2, Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions
ISO 12164-3, Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for
stationary tools
ISO 12164-4, Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for
stationary tools
ISO 15488, Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
ISO/TS 13399-80, Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D
models — Overview and principles
ISO/TS 13399-401, Cutting tool data representation and exchange — Part 401: Creation and exchange of
3D models — Converting, extending and reducing adaptive items
ISO 26622-1, Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
ISO 26622-2, Modular taper interface with ball track system — Part 2: Dimensions and designation of
receivers
ISO 26623-1, Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation
of shanks
ISO 26623-2, Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation
of receivers
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https: //www .iso .org/obp
— IEC Electropedia: available at http: //www .electropedia .org/
4 Abbreviated terms
DCONMS connection diameter machine side
DM polygonal diameter according to ISO 26623-1
DF flange diameter
DIX maximum body diameter according to the ISO 12164 series
MXA X-axis of the MCS coordinate system
2 © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------
ISO/TS 13399-406:2019(E)

MYA Y-axis of the MCS coordinate system
MZA Z-axis of the MCS coordinate system
LPCON connection protruding length
LPR protruding length
LS shank length
OAL overall length
5 Starting elements, coordinate systems and planes
5.1 General
The modelling of the 3D models shall be done by means of nominal dimensions. Some examples of
nominal dimensions are given in Annex A. Deviations within the tolerances are allowed.
WARNING — There is no guarantee that the 3D model, created according to the methods
described in this document, is a true representation of the physical tool supplied by the tool
manufacturer. If the models are used for simulation purposes — e.g. CAM simulation — it shall
be taken into consideration that the real product dimensions can differ from those nominal
dime
...

SPÉCIFICATION ISO/TS
TECHNIQUE 13399-406
Première édition
2019-01
Représentation et échange des
données relatives aux outils
coupants —
Partie 406:
Création et échanges de modèles 3D —
Conception d'interfaces de connexion
Cutting tool data representation and exchange —
Part 406: Creation and exchange of 3D models — Modelling of
connection interface
Numéro de référence
ISO/TS 13399-406:2019(F)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO/TS 13399-406:2019(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2019
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2019 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/TS 13399-406:2019(F)

Sommaire Page
Avant-propos .v
Introduction .vi
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes et définitions . 2
4 Termes abrégés . 3
5 Éléments de départ, systèmes de coordonnées, plans . 3
5.1 Généralités . 3
5.2 Système de référence (PCS – Système de coordonnées principal) . 3
5.3 Position de l’interface de connexion . 4
5.3.1 Généralités . 4
5.3.2 Interface de connexion prismatique . 4
5.3.3 Interface de connexion ronde . 4
5.4 Système de coordonnées de montage . 5
5.5 Plans . 5
6 Conception de l’interface de connexion . 6
7 Connexion du cône d'emmanchement pour mandrin de perceuse BFA .6
7.1 Généralités . 6
7.2 Propriétés nécessaires . 6
7.3 Contours (schémas) pour les corps monoblocs . 7
7.4 Corps monoblocs du cône d'emmanchement pour mandrin de perceuse . 7
8 Interface à cône polygonal avec face d'appui CCS . 9
8.1 Généralités . 9
8.2 Propriétés nécessaires . 9
8.3 Contours (schémas) pour les corps monoblocs . 9
8.3.1 Schéma extérieur . 9
8.3.2 Schéma intérieur . .10
8.4 Corps monoblocs du cône polygonal .11
8.4.1 Queue conique .11
8.4.2 Contour interne .11
8.4.3 Collerette et rainures du changement d’outil .12
8.4.4 Queue à cône polygonal complète .12
8.4.5 Trou conique du nez de broche .13
8.4.6 Nez de broche polygonal complet .13
9 Connexion par mandrin porte-fraise FDA .14
9.1 Généralités .14
9.2 Propriétés nécessaires .14
9.3 Contours (schémas) pour les corps monoblocs .14
9.3.1 Schéma pour la connexion du côté pièce .14
9.3.2 Schéma pour la connexion du côté machine .15
9.4 Corps monoblocs de la connexion .16
9.4.1 Corps monobloc pour la connexion du côté pièce .16
9.4.2 Corps monobloc pour la connexion du côté machine .16
10 Interfaces à cône creux-face HSK .17
10.1 Généralités .17
10.2 Propriétés nécessaires .18
10.3 Contours (schémas) pour les corps monoblocs .18
10.3.1 Schéma extérieur .18
10.3.2 Schéma intérieur . .19
10.4 Corps monoblocs des interfaces à cône creux-face HSK .19
© ISO 2019 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO/TS 13399-406:2019(F)

10.4.1 Corps monobloc pour la connexion du côté machine .19
10.4.2 Corps monobloc pour la connexion du côté pièce .21
11 Interfaces à cône modulaire avec système de serrage à billes .22
11.1 Généralités .22
11.2 Propriétés nécessaires .22
11.3 Contours (schémas) pour les corps monoblocs .22
11.3.1 Schéma extérieur .22
11.3.2 Schéma intérieur . .23
11.4 Corps monoblocs du cône modulaire avec système de serrage à billes .23
11.4.1 Corps monobloc pour la connexion du côté machine .23
11.4.2 Corps monobloc pour la connexion du côté pièce .25
12 Cône métrique MEG/MKG et cône Morse .25
12.1 Généralités .25
12.2 Propriétés nécessaires .26
12.3 Contours (schémas) pour les corps monoblocs .26
12.3.1 Schéma extérieur .26
12.3.2 Schéma intérieur . .26
12.4 Corps monoblocs du cône métrique ou du cône Morse .27
12.4.1 Corps monobloc pour la connexion du côté machine .27
12.4.2 Corps monobloc pour la connexion du côté pièce .28
13 Queues d'outils SKG à conicité 7/24 et à forte tonicité .29
13.1 Généralités .29
13.2 Propriétés nécessaires .29
13.3 Contours (schémas) pour les corps monoblocs .30
13.3.1 Schéma extérieur .30
13.3.2 Schéma intérieur . .31
13.4 Corps monoblocs du cône 7/24 .31
13.4.1 Corps monobloc pour la connexion du côté machine .31
13.4.2 Corps monobloc pour la connexion du côté pièce .33
14 Connexion à pince SZD standard .34
14.1 Généralités .34
14.2 Propriétés nécessaires .34
14.3 Contours (schémas) pour les corps monoblocs .34
14.4 Corps monoblocs pour le nez de broche de la pince .35
15 Queues cylindriques ZYL .36
15.1 Généralités .36
15.2 Propriétés nécessaires .36
15.3 Contours (schémas) pour les corps monoblocs .36
15.4 Corps monoblocs des connexions cylindriques.37
15.4.1 Corps monobloc pour la connexion du côté machine .37
15.4.2 Corps monobloc pour la connexion du côté pièce .38
16 Connexion cylindrique ZYV pour outils non-rotatifs – ISO 10889-1 .38
16.1 Généralités .38
16.2 Propriétés nécessaires .39
16.3 Contours (schémas) pour les corps monoblocs .39
16.4 Corps monoblocs de la connexion cylindrique pour les outils non-rotatifs .39
16.4.1 Corps monobloc pour la connexion du côté machine .39
16.4.2 Corps monobloc pour la connexion du côté pièce .40
17 Interfaces de connexion spécifiques du fabricant .41
18 Structure des éléments de conception (arborescence du modèle) .41
Annexe A (informative) Informations sur les dimensions nominales .42
Bibliographie .43
iv © ISO 2019 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO/TS 13399-406:2019(F)

Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l'élaboration du document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de
brevets reçues par l'ISO (voir www .iso .org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www .iso .org/avant -propos.
Le comité chargé de l'élaboration du présent document est l'ISO/TC 29, Petit outillage.
La liste de toutes les parties de la série ISO 13399 peut être consultée sur le site de l'ISO.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www .iso .org/fr/members .html.
© ISO 2019 – Tous droits réservés v

---------------------- Page: 5 ----------------------
ISO/TS 13399-406:2019(F)

Introduction
Le présent document définit le concept, les termes et définitions pour concevoir des modèles 3D
d’interfaces de connexion pour la conception d’outils coupants, pouvant être utilisées pour la
programmation CN, la simulation des processus de fabrication et la détermination des collisions dans
les processus d'usinage. Il n'est pas prévu de normaliser la conception de l'outil coupant lui-même.
Un outil coupant est utilisé dans une machine pour enlever la matière d'une pièce par une action de
cisaillement sur les arêtes de coupe de l'outil. Les données de l'outil coupant qui peuvent être décrites par
la série ISO 13399 comprennent, sans s' y limiter, tout ce qui se trouve entre la pièce et la machine-outil.
Les informations relatives aux plaquettes, outils solides, outils assemblés, adaptateurs, composants et
leurs relations peuvent être représentées par le présent document. La demande croissante de fournir
à l'utilisateur final des modèles 3D pour les besoins définis ci-dessus est à la base de l'élaboration de la
série de Normes Internationales.
L'objectif de la série ISO 13399 est de fournir les moyens de représenter les informations décrivant
les outils coupants sous une forme informatisable indépendante d'un système informatique particulier.
Cette représentation facilitera le traitement et les échanges de données relatives aux outils coupants
par et entre les différents logiciels et plates-formes informatiques, et permettra l'application de ces
données dans la planification de la production, les opérations de coupe et l'approvisionnement en outils.
La nature de cette description la rend adaptée, non seulement pour l'échange de fichiers neutres mais
également en tant que base pour la mise en œuvre et le partage de bases de données produits et pour
l'archivage. Les méthodes utilisées pour ces représentations sont celles développées par l'ISO/TC 184
Systèmes d'automatisation et intégration, SC 4 Données industrielles, pour la représentation de données
produits en utilisant des modèles d'informations normalisés et des dictionnaires de référence.
Les définitions et identifications des entrées du dictionnaire sont définies par des données standards
qui consistent en des instances de types de données d'entité EXPRESS définis dans le schéma commun
du dictionnaire, qui résulte des efforts conjoints entre l'ISO/TC 184/SC 4 et l'IEC/TC 3/SC 3D Propriétés
et classes des produits et leur identification, et de ses extensions définies dans l’ISO 13584-24 et
l'ISO 13584-25.
vi © ISO 2019 – Tous droits réservés

---------------------- Page: 6 ----------------------
SPÉCIFICATION TECHNIQUE ISO/TS 13399-406:2019(F)
Représentation et échange des données relatives aux outils
coupants —
Partie 406:
Création et échanges de modèles 3D — Conception
d'interfaces de connexion
1 Domaine d'application
Le présent document spécifie un concept pour la conception d’interfaces de connexion pour les éléments
relatifs aux attachements et aux outils, limité à tous les types de connexion normalisés, utilisant les
propriétés et domaines de valeurs associés.
Le présent document spécifie les exigences de modèles 3D simplifiés pour l’échange de données de
l’interface de connexion.
Les dimensions indiquées dans le présent document ne sont pas toutes définies dans la série ISO 13399.
Les éléments suivants n'entrent pas dans le domaine d'application du présent document:
— les applications où les données standards peuvent être stockées ou référencées;
— le concept de modèles 3D pour outils coupants;
— le concept de modèles 3D pour des éléments coupants;
— le concept de modèles 3D pour d'autres éléments relatifs aux outils, non décrits dans le domaine
d’application du présent document;
— le concept de modèles 3D pour les éléments relatifs aux attachements;
— le concept de modèles 3D pour les éléments relatifs aux assemblages et éléments auxiliaires.
2 Références normatives
Les documents suivants, en tout ou partie, sont référencés de façon normative dans le présent document
et sont indispensables à son application. Pour les références datées, seule l'édition citée s'applique.
Pour les références non datées, la dernière édition du document de référence s'applique (y compris les
éventuels amendements).
ISO 296, Machines-outils — Cônes pour emmanchements d'outils à faible conicité
ISO 239, Cônes d'emmanchement pour mandrins de perceuse
ISO 3338 (toutes les parties), Queues cylindriques d’outils à fraiser
ISO 5414-1, Mandrins porte-outils, à vis de blocage, pour outils à queue cylindrique à méplat — Partie 1:
Dimensions du système d'entraînement des queues d'outils
ISO 5414-2, Mandrins porte-outils, à vis de blocage, pour outils à queue cylindrique à méplat — Partie 2:
Dimensions d'encombrement des mandrins et désignation
ISO 6462, Fraises à surfacer et à surfacer et dresser, à plaquettes amovibles — Dimensions
ISO 7388 (toutes les parties), Queues d’outils à conicité 7/24 pour changement automatique d’outils
© ISO 2019 – Tous droits réservés 1

---------------------- Page: 7 ----------------------
ISO/TS 13399-406:2019(F)

ISO 9270-1, Nez de broches à conicité 7/24 pour changement automatique d'outils — Partie 1: Dimensions
et désignation des nez de broches de formes S et SF
ISO 9270-2, Nez de broches à conicité 7/24 pour changement automatique d'outils — Partie 2: Dimensions
et désignation des nez de broches de formes J et JF
ISO 9766, Forets à plaquettes amovibles — Queues cylindriques à méplat
ISO 10649-1, Mandrins porte-fraise à entraînement par clavette et tenon — Partie 1: Dimensions générales
ISO 10889 (toutes les parties), Porte-outil à queue cylindrique
ISO 10897, Pinces de serrage pour mandrins à conicité 1:10 — Pinces, mandrins à pinces, écrous de serrage
ISO 12164-1, Interfaces à cône creux-face — Partie 1: Queues — Dimensions
ISO 12164-2, Interfaces à cône creux-face — Partie 2: Nez de broche — Dimensions
ISO 12164-3, Interfaces à cône creux-face — Partie 3: Dimensions des queues pour outils non rotatifs
ISO 12164-4, Interfaces à cône creux-face — Partie 4: Dimensions des nez de broches pour outils non
rotatifs
ISO 15488, Pinces de serrage avec angle de réglage de 8 degrés pour queues d'outil — Pinces, écrous de
serrage et dimensions d'assemblage
ISO/TS 13399-80, Représentation et échange des données relatives aux outils coupants — Partie 80:
Création et échange de modèles 3D — Vue d'ensemble et principes
ISO/TS 13399-401, Représentation et échange des données relatives aux outils coupants — Partie 401:
Création et échange de modèles 3D — Conversion, rallonge et réduction des éléments relatifs aux
attachements
ISO 26622-1, Interfaces à cône modulaire avec système de serrage à billes — Partie 1: Dimensions et
désignation des queues
ISO 26622-2, Interfaces à cône modulaire avec système de serrage à billes — Partie 2: Dimensions et
désignation des nez de broche
ISO 26623-1, Interfaces à cône polygonal avec face d’appui — Partie 1: Dimensions et désignation des queues
ISO 26623-2, Interfaces à cône polygonal avec face d'appui — Partie 2: Dimensions et désignation des nez
de broche
3 Termes et définitions
Aucun terme, aucune définition n’est listé(e) dans le présent document.
L’ISO et l’IEC maintiennent des bases de données terminologiques destinées à être utilisées dans le
cadre de la normalisation, aux adresses suivantes:
— ISO Plateforme de consultation en ligne: disponible sur https: //www .iso .org/obp
— IEC Electropedia: disponible sur http: //www .electropedia .org/
2 © ISO 2019 – Tous droits réservés

---------------------- Page: 8 ----------------------
ISO/TS 13399-406:2019(F)

4 Termes abrégés
DCONMS diamètre de connexion côté machine
DM diamètre polygonal conformément à l’ISO 26623-1
DF diamètre de collerette
DIX diamètre du corps maximal conformément à la série ISO 12164
MXA axe x du système de coordonnées MCS
MYA axe y du système de coordonnées MCS
MZA axe z du système de coordonnées MCS
LPCON longueur de connexion de dépassement
LPR longueur de dépassement
LS longueur de queue
OAL longueur totale
5 Éléments de départ, systèmes de coordonnées, plans
5.1 Généralités
La modélisation des modèles 3D doit être réalisée à l'aide de dimensions nominales. Des exemples de
dimensions nomina
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.