SIST EN 55011:2016/oprAB:2023

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - limits and methods of measurement

Deletion of the annexes dealing with Statistical assessment of series produced equipment.
This Common Modification will cover the base document of EN 55011:2016 + A1 & A2 (from CISPR) + A11:2020 (of CLC) and whatever is presently in the pipeline.  This homegrown Common Mod (prAA) is to delete 80/80 rule mentioned in all the available Amendments from CISPR and CLC homegrown Amendment (A11)  in order to meet EC's expectation and regulatory requirements.

Appareils industriels, scientifiques et médicaux - Caractéristiques de perturbations radioélectriques - Limites et méthodes de mesure

Industrijska, znanstvena in medicinska oprema - Karakteristike radio-frekvenčne motnje - Mejne vrednosti in merilne metode - Dopolnilo AB

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Apr-2023
• ICS: 33.100.10 - Emission
• Technical Committee: EMC - Electromagnetic compatibility
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 15-Mar-2023
• Due Date: 02-Aug-2023
• Completion Date: 01-Jun-2023
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Mandate: M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
• Ref Project: EN 55011:2016/prAB - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - limits and methods of measurement

Relations

• Amends: SIST EN 55011:2016 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
• Effective Date: 07-Jun-2022
• Amends: SIST EN 55011:2016 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
• Effective Date: 09-Nov-2021
• Revised: kSIST FprEN IEC 55011:2023 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
• Effective Date: 20-Dec-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 55011:2016/oprAB:2023
01-april-2023
Industrijska, znanstvena in medicinska oprema - Karakteristike občutljivosti za
radijske motnje - Mejne vrednosti in merilne metode - Dopolnilo AB
Industrial, scientific and medical equipment - Radio-frequency disturbance
characteristics - limits and methods of measurement
Appareils industriels, scientifiques et médicaux - Caractéristiques de perturbations
radioélectriques - Limites et méthodes de mesure
Ta slovenski standard je istoveten z: EN 55011:2016/prAB
ICS:
33.100.10 Emisija Emission
SIST EN 55011:2016/oprAB:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 55011:2016/oprAB:2023

---------------------- Page: 2 ----------------------
SIST EN 55011:2016/oprAB:2023


EUROPEAN STANDARD DRAFT
EN 55011:2016
NORME EUROPÉENNE

EUROPÄISCHE NORM
prAB
February 2023
ICS 33.100.10 -
English Version
Industrial, scientific and medical equipment - Radio-frequency
disturbance characteristics - limits and methods of measurement
To be completed To be completed
This draft amendment prAB, if approved, will modify the European Standard EN 55011:2016; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2023-05-12.

It has been drawn up by CLC/TC 210.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 75007 Ref. No. EN 55011:2016/prAB E

---------------------- Page: 3 ----------------------
SIST EN 55011:2016/oprAB:2023
EN 55011:2016/prAB:2023 (E)
Contents Page
1 European foreword . 3
2 1 Modification to Clause 1, “Scope” . 4
3 2 Deletion of 3.19 . 4
4 3 Deletion of subclause 5.3 . 4
5 4 Modification to subclause 6.1. 4
6 5 Modification to subclause 6.2.1.3 . 4
7 6 Modification to subclause 6.2.2.3 . 5
8 7 Modification to subclause 6.3.1.3 . 6
9 8 Modification to subclause 7.1.3 . 6
10 9 Modification to subclause 7.3.3 . 6
11 10 Modification to subclause 7.3.4.1 . 6
12 11 Modification to subclause 7.3.4.2.1 .
...