SIST EN ISO 3262-22:2002
(Main)Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2001)
Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2001)
This part of ISO 3262 specifies the requirements and the corresponding methods of test for flux-calcined kieselguhr.
Füllstoffe für Beschichtungsstoffe - Anforderungen und Prüfverfahren - Teil 22: Kieselgur, fluxcalciniert (ISO 3262-22:2001)
Dieser Teil von ISO 3262 legt Anforderungen und entsprechende Prüfverfahren für fluxcalcinierten Kieselgur fest.
Matieres de charge pour peintures - Spécifications et méthodes d'essai - Partie 22: Kieselguhr, flux-calciné (ISO 3262-22:2001)
La présente partie de l'ISO 3262 spécifie les exigences et les méthodes d'essai correspondantes pour le kieselguhr flux-calciné.
Polnila za barve - Specifikacije in metode preskušanja - 22. del: Kremenka, kalcinirano topilo (ISO 3262-22:2001)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3262-22:2002
01-junij-2002
Polnila za barve - Specifikacije in metode preskušanja - 22. del: Kremenka,
kalcinirano topilo (ISO 3262-22:2001)
Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined
kieselguhr (ISO 3262-22:2001)
Füllstoffe für Beschichtungsstoffe - Anforderungen und Prüfverfahren - Teil 22: Kieselgur,
fluxcalciniert (ISO 3262-22:2001)
Matieres de charge pour peintures - Spécifications et méthodes d'essai - Partie 22:
Kieselguhr, flux-calciné (ISO 3262-22:2001)
Ta slovenski standard je istoveten z: EN ISO 3262-22:2001
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
SIST EN ISO 3262-22:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3262-22:2002
---------------------- Page: 2 ----------------------
SIST EN ISO 3262-22:2002
EUROPEAN STANDARD
EN ISO 3262-22
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2001
ICS 87.060.10
English version
Extenders for paints - Specifications and methods of test - Part
22: Flux-calcined kieselguhr (ISO 3262-22:2001)
Matières de charge pour peintures - Spécifications et Füllstoffe für Beschichtungsstoffe - Anforderungen und
méthodes d'essai - Partie 22: Kieselguhr, flux-calciné (ISO Prüfverfahren - Teil 22: Kieselgur, fluxcalciniert (ISO 3262-
3262-22:2001) 22:2001)
This European Standard was approved by CEN on 15 October 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3262-22:2001 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3262-22:2002
EN ISO 3262-22:2001 (E)
Foreword
The text of the International Standard ISO 3262-22:2001 has been prepared by Technical
Committee ISO/TC 35 "Paints and varnishes" in collaboration with Technical Committee
CEN/TC 298 "Pigments and extenders", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by April 2002, and conflicting national
standards shall be withdrawn at the latest by April 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of the International Standard ISO 3262-22:2001 was approved by CEN as a
European Standard without any modification.
NOTE Normative references to International Standards are listed in annex ZA (normative).
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3262-22:2002
EN ISO 3262-22:2001 (E)
Annex ZA
(normative)
Normative references to International Publicationswith their relevant
European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text, and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN/HD Year
ISO 787-2 1981 General methods of test for pigments and EN ISO 787-2 1995
extenders — Part 2: Determination of matter
volatile at 105 °C
ISO 787-3 1979 General methods of test for pigments and EN ISO 787-3 1995
extenders — Part 3: Determination of matter
soluble in water — Hot extraction method
ISO 787-5 1980 General methods of test for pigments and EN ISO 787-5 1995
extenders — Part 5: Determination of oil
absorption value
ISO 787-9 1981 General methods of test for pigments and EN ISO 787-9 1995
extenders — Part 9: Determination of pH
value of an aqueous suspension
ISO 3262-1 1997 Extenders for paints – Specifications and EN ISO 3262-1 1998
methods of test — Part 1: Introduction and
general test methods
ISO 3696 1987 Water for analytical laboratory use — EN ISO 3696 1995
Specifications and test methods
ISO 15528 2000 Paints, varnishes and raw materials for paints EN ISO 15528 2000
and varnishes — Sampling
3
---------------------- Page: 5 ----------------------
SIST EN ISO 3262-22:2002
---------------------- Page: 6 ----------------------
SIST EN ISO 3262-22:2002
INTERNATIONAL ISO
STANDARD 3262-22
First edition
2001-10-15
Extenders for paints — Specifications and
methods of test —
Part 22:
Flux-calcined kieselguhr
Matières de charge pour peintures — Spécifications et méthodes d'essai —
Partie 22: Kieselguhr, flux-calciné
Reference number
ISO 3262-22:2001(E)
© ISO 2001
---------------------- Page: 7 ----------------------
SIST EN ISO 3262-22:2002
ISO 3262-22:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elec-
tronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's mem-
ber body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2001 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 3262-22:2002
ISO 3262-22:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.