Sawn timber - Method for assessment of case-hardening

This European standard defines a destructive method of assessing the case hardening of a piece of timber with reference to the distorsion measured in a slice taken from the piece. This standard applies to sawn timber and timber which has been planed or surfaced by other means. It applies to both hardwood and softwood with a thickness not greater than 100 mm.

Schnittholz - Verfahren zur Ermittlung der Verschalung

Bois sciés - Méthode de mesure de la cémentation

Sawn timber - Method for assessment of case-hardening

General Information

Status
Withdrawn
Publication Date
30-Sep-2003
Withdrawal Date
14-Nov-2010
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Oct-2010
Due Date
12-Nov-2010
Completion Date
15-Nov-2010

Relations

Buy Standard

Standardization document
ENV 14464:2003
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 14464:2003
01-oktober-2003
Sawn timber - Method for assessment of case-hardening
Sawn timber - Method for assessment of case-hardening
Schnittholz - Verfahren zur Ermittlung der Verschalung
Bois sciés - Méthode de mesure de la cémentation
Ta slovenski standard je istoveten z: ENV 14464:2002
ICS:
79.040 Les, hlodovina in žagan les Wood, sawlogs and sawn
timber
SIST ENV 14464:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 14464:2003

---------------------- Page: 2 ----------------------

SIST ENV 14464:2003
EUROPEAN PRESTANDARD
ENV 14464
PRÉNORME EUROPÉENNE
EUROPÄISCHE VORNORM
November 2002
ICS 79.040
English version
Sawn timber - Method for assessment of case-hardening
Bois sciés - Méthode de mesure de la cémentation Schnittholz - Verfahren zur Ermittlung der Verschalung
This European Prestandard (ENV) was approved by CEN on 23 September 2002 as a prospective standard for provisional application.
The period of validity of this ENV is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the ENV can be converted into a European Standard.
CEN members are required to announce the existence of this ENV in the same way as for an EN and to make the ENV available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the ENV) until the final
decision about the possible conversion of the ENV into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. ENV 14464:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST ENV 14464:2003
ENV 14464:2002 (E)
Contents
Foreword.3
1 Scope .3
2 Normative references .3
3 Terms and definitions.3
4 Slicing test method.3
4.1 Apparatus .3
4.1.1 Calibrated measuring device.3
4.1.2 Jig .4
4.1.3 Slicing device .4
4.2 Procedure .4
4.3 Calculation and expression of the result .6
2

---------------------- Page: 4 ----------------------

SIST ENV 14464:2003
ENV 14464:2002 (E)
Foreword
This document ENV 14464:2002 has been prepared by Technical Committee CEN /TC 175, "Round and sawn
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.