iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 24342:2024

(Main)

Resilient and textile floor-covering - Determination of side length, edge straightness and squareness of tiles and planks (ISO 24342:2024)

Resilient and textile floor-covering - Determination of side length, edge straightness and squareness of tiles and planks (ISO 24342:2024)

adapt the test methods to planks

Elastische und textile Bodenbeläge - Bestimmung der Kantenlänge, Rechtwinkligkeit und Geradheit von Platten und Dielen (ISO 24342:2024)

Dieses Dokument legt Verfahren zur Bestimmung der Kantenlängen, Kantengeradheit und Rechtwinkligkeit von quadratischen und/oder rechtwinkligen elastischen oder textilen Bodenplatten und Dielen fest.

Revêtements de sol résilients ou textiles - Détermination de la longueur des bords, de la rectitude des arêtes et de l'équerrage des dalles et des lames(ISO 24342:2024)

Le présent document spécifie des méthodes de détermination de la longueur des bords, de la rectitude des arêtes et de l’équerrage des revêtements de sol résilients ou textiles carrés et/ou rectangulaires sous forme de dalles et de lames.

Netekstilne in tekstilne talne obloge - Določanje stranske dolžine, ravnosti robov in pravokotnosti plošč in desk (ISO 24342:2024)

General Information

Status
Published
Public Enquiry End Date
02-Aug-2023
Publication Date
15-Aug-2024
ICS
97.150 - Floor coverings
Technical Committee
ITEK - Textile and textile products
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Aug-2024
Due Date
10-Oct-2024
Completion Date
16-Aug-2024
Ref Project
EN ISO 24342:2024 - Resilient and textile floor-covering - Determination of side length, edge straightness and squareness of tiles and planks (ISO 24342:2024)

Relations

Revises
SIST EN ISO 24342:2019 - Resilient and textile floor-coverings - Determination of side length, edge straightness and squareness of tiles (ISO 24342:2018)
Effective Date
19-Jan-2023

Buy Standard

EN ISO 24342:2024EN ISO 24342:2024
PreviousNext
Standard
EN ISO 24342:2024
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2024
Netekstilne in tekstilne talne obloge - Določanje stranske dolžine, ravnosti robov
in pravokotnosti plošč in desk (ISO 24342:2024)
Resilient and textile floor-covering - Determination of side length, edge straightness and
squareness of tiles and planks (ISO 24342:2024)
Elastische und textile Bodenbeläge - Bestimmung der Kantenlänge, Rechtwinkligkeit und
Geradheit von Platten und Dielen (ISO 24342:2024)
Revêtements de sol résilients ou textiles - Détermination de la longueur des bords, de la
rectitude des arêtes et de l'équerrage des dalles et des lames(ISO 24342:2024)
Ta slovenski standard je istoveten z: EN ISO 24342:2024
ICS:
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 24342
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 97.150 Supersedes EN ISO 24342:2018
English Version
Resilient and textile floor-covering - Determination of side
length, edge straightness and squareness of tiles and
planks (ISO 24342:2024)
Revêtements de sol résilients ou textiles - Elastische und textile Bodenbeläge - Bestimmung der
Détermination de la longueur des bords, de la rectitude Kantenlänge, Rechtwinkligkeit und Geradheit von
des arêtes et de l'équerrage des dalles et des lames(ISO Platten und Dielen (ISO 24342:2024)
24342:2024)
This European Standard was approved by CEN on 28 April 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24342:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 24342:2024) has been prepared by Technical Committee ISO/TC 219 "Floor
coverings" in collaboration with Technical Committee CEN/TC 134 “Resilient, textile, laminate and
modular mechanical locked floor coverings” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2025, and conflicting national standards shall
be withdrawn at the latest by January 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 24342:2018.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 24342:2024 has been approved by CEN as EN ISO 24342:2024 without any modification.

International
Standard
ISO 24342
Fourth edition
Resilient and textile floor
2024-06
coverings — Determination of
side length, edge straightness and
squareness of tiles and planks
Revêtements de sol résilients et textiles — Détermination de la
longueur des bords, de la rectitude des arêtes et de l’équerrage
des dalles et des lames
Reference number
ISO 24342:2024(en) © ISO 2024
ISO 24342:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 24342:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
5.1 Reference plate .2
5.2 Rigid metal or glass plate .3
5.3 Flat bedplate apparatus . .3
5.4 Dial gauge, calliper gauge and/or thickness gauges .5
5.5 Movable dial gauges apparatus . .5
6 Sampling and selection of specimens . 6
7 Atmosphere for conditioning and testing . 6
7.1 Resilient floor coverings .6
7.2 Textile floor coverings .7
8 Procedure . 7
8.1 General .7
8.2 Side length .7
8.2.1 Gauge method .7
8.2.2 Movable dial gauge method .7
8.2.3 Sliding calliper method . . .8
8.3 Edge straightness .8
8.3.1 Thickness gauge method .8
8.3.2 Movable dial gauge method .8
8.4 Squareness .9
8.4.1 Thickness gauge method .9
8.4.2 Movable dial gauge method .9
9 Calculation and expression of the results . 9
9.1 For flat bedplate apparatus (5.3) and thickness gauge (5.4) .9
9.1.1 Side length .9
9.1.2 Edge straightness .9
9.1.3 Squareness .9
9.2 For the movable dial gauge apparatus .9
9.2.1 Tiles .9
9.2.2 Planks .9
9.3 For the sliding calliper apparatus . .10
10 Test report . 10
Bibliography .12

iii
ISO 24342:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be repr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13329:2024(Main)
Laminate floor coverings - Specifications, requirements and test methods
EN 13329:2023

This document specifies characteristics, requirements and test methods for laminate floor coverings with a surface layer as defined in 3.2 to 3.5. It also specifies requirements for marking and packaging.
It includes a classification system, based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice.
Laminate floor coverings are generally designed for floating installations and are considered for domestic and commercial levels of use, including domestic kitchens. This document does not specify requirements relating to the use in areas which are subjected to frequent wetting, such as bathrooms, laundry rooms or saunas. In general, laminate floor coverings can only be used in those areas when authorized by the manufacturer and under conditions described in the manufacturer's installation guidelines.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17861:2023(Main)
Resilient, textile, laminate and modular mechanical locked floor coverings - Circular Economy - Terms and definitions
EN 17861:2023

This document defines terms regarding circular economy that are used by the flooring sector.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12104:2023(Main)
Resilient floor coverings - Cork floor tiles - Specification
EN 12104:2023

This document specifies the requirements for cork floor coverings made from agglomerated composition cork, with or without a decorative surface layer, with or without applied colours, supplied in tile form which are designed to be used with a factory finish and/or an in situ finish.
The cork floor decorative surface layer can be made of cork or other bio-based decorative materials, e.g. wood or bamboo veneers, linoleum, leather or natural fibres.
This document includes a classification system based on intensity of use which shows where cork floor tiles with a factory finish can give satisfactory service (see EN ISO 10874). It also specifies requirements for marking, labelling and packing.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16511:2023(Main)
Modular mechanical locked floor coverings (MMF) - Specification, requirements and test method for multilayer modular panels for floating installation
EN 16511:2023

This document specifies the characteristics of multilayer mechanical locked floor covering with a wear-
resistant and decorative surface layer supplied in panels (either tile or plank form). The floor panels are
considered suitable for domestic and commercial levels of use and designed for floating installation.
This document does not apply to resilient floor panels for loose-laying according to EN ISO 20326, to
multilayer wood floorings according to EN 13489, to wood veneer floor coverings according to EN 14354,
to laminate floor covering according to EN 13329, EN 14978 and EN 15468 nor to products specified in
EN ISO 10581, EN ISO 10582, EN ISO 24011, EN 12104 and ISO 14486.
This document is applicable to areas which are subject to frequent wetting, e.g. bathrooms, laundry rooms
or saunas, only if specified by the producer.
This document also includes requirements for marking and packaging.
In Annex A (informative), optional properties are given. In Annex B (informative), a test method for the
classification of the flexibility is given.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 26986:2012/A1:2022(Amendment)
Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification - Amendment 1 (ISO 26986:2010/Amd 1:2022)
EN ISO 26986:2012/A1:2022

ISO 26986:2010 specifies the characteristics of floor coverings based on expanded (cushioned) poly(vinyl chloride), supplied as either tiles or rolls.
ISO 26986:2010 includes a classification system based on the intensity of use, which shows where resilient floor coverings give satisfactory service.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11638:2022(Main)
Resilient floor coverings - Heterogeneous poly(vinyl chloride) flooring on foam - Specification (ISO 11638:2020, including corrected version 2021-09)
EN ISO 11638:2022

This document specifies the characteristics of heterogeneous poly(vinyl chloride) flooring on foam, based on poly(vinyl chloride), and supplied in roll form or tile and plank. Such products can contain a transparent, non PVC factory finish.
To encourage the consumer to make an informed choice, this document includes a classification system, based on intensity of use, which shows where these floor coverings can be expected to give satisfactory service.
It also specifies requirements for marking.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17849:2022(Main)
Resilient, textile, laminate and modular mechanical locked floor coverings - Guidance on how to implement EN 14041:2004/AC:2006 under the Construction Products Regulation EU 305/2011 (CPR)
CEN/TR 17849:2022

This document concerns floor covering products falling under the scope of EN 14041 as well as mandate M/119 and M/119 rev.1. Such products are considered construction products for indoor use.
Excluded are products which are loose laid (barrier)mats, runners and rugs, as well as products which might be covered by other harmonized standards, such as indoor sports flooring, or other legislation such as flooring in public transport.
The purpose of this document is to provide guidance on how to deal with the situation that
a)   the version EN 14041:2004/AC:2006 has to be used for placing CEN TC134 products onto the European market, even though it
1)   was developed under the no longer applicable “Council Directive 89/106/EEC on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (CPD)”,
and
2)   has been withdrawn and replaced by EN 14041:2018 in the current CEN catalogue;
and
b)   the more recent version EN 14041:2018 cannot be used for placing CEN TC134 products onto the European market, even though it
1)   was developed under the currently applicable legislation, “Regulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (CPR)”
2)   is the active version of the standard in the current CEN catalogue.
The focus will be on an overview of the resources available from the European commission for CE marking and placing products onto the European market as well as how to implement EN 14041:2004/AC:2006 under the current European legislation pointing out sections which are no longer valid.

  • Technical report
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23999:2022(Main)
Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2021)
EN ISO 23999:2021

This document specifies a method for determining dimensional stability and curling of resilient floor
coverings, in the form of sheets, tiles or planks after exposure to heat.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 1763:2021(Main)
Textile floor coverings - Determination of number of tufts and/or loops per unit length and per unit area
ISO 1763:2020

This document specifies a method for the determination of the number of tufts and/or loops per unit length and per unit area of a textile floor covering. It is applicable to textile floor coverings with the pile of which consists of tufts and/or loops.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    5 pages
    French language
    sale 15% off
SIST
SIST EN 17539:2021(Main)
Modular mechanical locked floor coverings (MMF) - Determination of geometrical characteristics
EN 17539:2021

This document describes test methods for determination of the geometrical characteristics of modular mechanical locked floor covering panels in respect to thickness, length, width, squareness, straightness, width flatness, length flatness, openings between assembled elements and height differences between assembled elements.
The geometrical characteristics of modular mechanical locked panels are important considerations because installed flooring will have an objectionable appearance if these performance criteria are not followed. This can cause the installed panels to line up unevenly, producing unsightly seams, uneven surfaces and corners that do not match.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day