SIST EN 13845:2017
(Main)Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification
General Information
- Abstract
This European Standard specifies the characteristics of floor coverings with sustainable enhanced slip resistant characteristics under specified conditions based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form.
To encourage the consumer to make an informed choice, this European Standard includes a classification system (see EN ISO 10874) based on intensity of use, which shows where resilient floor coverings should give satisfactory service.
In addition, this European Standard details the requirements for the information to be included on the packaging labels.
The slip measurements are made in a laboratory on ex-factory floor covering surfaces only. The method described is suitable for testing on wet surfaces.
- Status
- Published
- Public Enquiry End Date
- 09-Aug-2015
- Publication Date
- 05-Sep-2017
- Technical Committee
- ITEK - Textile and textile products
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 30-Aug-2017
- Due Date
- 04-Nov-2017
- Completion Date
- 06-Sep-2017
Overview
EN 13845:2017 - Resilient floor coverings - Polyvinyl chloride (PVC) floor coverings with particle‑based enhanced slip resistance - Specification - is a European Standard from CEN that defines performance, testing and marking requirements for PVC floor coverings (tiles or rolls) designed to provide sustainable enhanced slip resistance in wet conditions. The standard addresses ex‑factory surfaces only and is suitable for testing slip resistance on wet surfaces.
Key topics and requirements
- Scope and product type
- Applies to PVC and modified PVC floor coverings with particle‑based enhanced slip resistance (identifiable aggregates or particles embedded in the wear surface).
- Covers both roll and tile formats.
- Slip resistance
- Slip measurements are laboratory tests on ex‑factory surfaces; methods include the ramp (ramp test) and the pendulum friction test (see Annex C and CEN/TS 16165:2016).
- Tests can be performed for barefoot or footwear use.
- Performance classification
- Uses the EN ISO 10874 classification scheme (levels of use: domestic, commercial, industrial) to help consumers and specifiers match products to intensity of use.
- Tableed wear‑resistance cycles and minimum thicknesses are specified for different classes (examples in the standard: 20 000 to 50 000 Frick‑Taber cycles for various classes).
- Technical properties & tests
- Dimensional stability, thickness (EN ISO 24346), indentation (EN ISO 24343‑1), flexibility (EN ISO 24344), colour fastness (EN ISO 105‑B02), seam strength (EN 684), castor chair resistance (EN 425) and wear resistance (EN 660‑2 Frick‑Taber) are referenced.
- Marking and labelling
- Packaging must state the standard number/date, manufacturer, product name, colour/batch, classification symbols, dimensions, installation notes (e.g., rolls to be fully bonded), and slip resistance classification.
Applications and practical value
- Use EN 13845:2017 to specify and verify PVC safety flooring for wet‑loaded areas such as kitchens, washrooms, changing rooms, pool surrounds and other public/industrial wet zones.
- Enables informed material selection by comparing slip resistance, wear life, and classification against expected traffic and use conditions.
- Ensures consistent testing and labelling so building owners, architects, installers and procurement teams can assess suitability for barefoot vs footwear zones.
Who should use this standard
- Flooring manufacturers and product developers (for design and compliance)
- Test laboratories (for conducting ramp/pendulum and wear tests)
- Architects, specifiers and safety managers (for product selection)
- Facility managers and procurement teams (for procurement and asset management)
- Installers (for installation requirements noted on labels)
Related standards
- EN ISO 10874 - Classification of floor coverings
- CEN/TS 16165:2016 - Slip resistance evaluation methods
- EN 660‑2 (Frick‑Taber) - Wear resistance
- EN ISO 24346, EN ISO 24343‑1, EN ISO 23997, EN 425, EN 684 - dimensional, indentation, mass, castor chair and seam tests
Using EN 13845:2017 helps ensure PVC safety flooring meets harmonized European requirements for slip resistance, durability and clear labelling - key for safer wet areas and compliant procurement.
Relations
- Effective Date
- 01-Oct-2017
- Effective Date
- 28-Jan-2026
- Refers
SIST EN ISO 16906:2025 - Resilient floor coverings - Determination of seam strength (ISO 16906:2015) - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
SIST EN 13845:2017 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification". This standard covers: This European Standard specifies the characteristics of floor coverings with sustainable enhanced slip resistant characteristics under specified conditions based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form. To encourage the consumer to make an informed choice, this European Standard includes a classification system (see EN ISO 10874) based on intensity of use, which shows where resilient floor coverings should give satisfactory service. In addition, this European Standard details the requirements for the information to be included on the packaging labels. The slip measurements are made in a laboratory on ex-factory floor covering surfaces only. The method described is suitable for testing on wet surfaces.
This European Standard specifies the characteristics of floor coverings with sustainable enhanced slip resistant characteristics under specified conditions based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form. To encourage the consumer to make an informed choice, this European Standard includes a classification system (see EN ISO 10874) based on intensity of use, which shows where resilient floor coverings should give satisfactory service. In addition, this European Standard details the requirements for the information to be included on the packaging labels. The slip measurements are made in a laboratory on ex-factory floor covering surfaces only. The method described is suitable for testing on wet surfaces.
SIST EN 13845:2017 is classified under the following ICS (International Classification for Standards) categories: 97.150 - Floor coverings. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13845:2017 has the following relationships with other standards: It is inter standard links to SIST EN 13845:2005, SIST EN ISO 4918:2021, SIST EN ISO 16906:2025, SIST EN ISO 24341:2012, SIST EN ISO 23997:2012, SIST EN 12466:1999, SIST EN ISO 10874:2012, SIST EN ISO 24344:2012, SIST EN 660-2:1999, SIST EN ISO 24346:2012, SIST EN ISO 24342:2024, SIST EN ISO 105-B02:2014, SIST-TS CEN/TS 16165:2016, SIST EN ISO 24343-1:2012, SIST EN ISO 23999:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13845:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elastische Bodenbeläge - Polyvinylchlorid-Bodenbeläge mit erhöhtem Gleitwiderstand - SpezifikationRevêtements de sol résilients - Revêtements de sol en chlorure de polyvinyle à résistance accrue au glissement - SpécificationResilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification97.150Talne oblogeFloor coveringsICS:Ta slovenski standard je istoveten z:EN 13845:2017SIST EN 13845:2017en,fr,de01-oktober-2017SIST EN 13845:2017SLOVENSKI
STANDARDSIST EN 13845:20051DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13845
August
t r s y ICS
{ yä s w r Supersedes EN
s u z v wã t r r wEnglish Version
Resilient floor coverings æ Polyvinyl chloride floor coverings with particle based enhanced slip resistance æ Specification Revêtements de sol résilients æ Revêtements de sol en chlorure de polyvinyle à résistance accrue au glissement æ Spécification
Elastische Bodenbeläge æ PolyvinylchloridæBodenbeläge mit partikelbasiertem erhöhten Gleitwiderstand æ Spezifikation This European Standard was approved by CEN on
t t May
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u z v wã t r s y ESIST EN 13845:2017
Optional properties . 11 Annex B (informative)
Additional methods of test . 12 Annex C (normative)
Determination of slip resistance . 13 C.1 Scope . 13 C.2 Referenced documents . 13 C.3 Principle . 13 C.4 Operator . 13 C.5 Test footwear . 13 C.6 Apparatus . 14 C.7 Test fluid . 14 C.8 Test piece . 14 C.9 Procedure. 14 C.10 Evaluation . 15 C.11 Calibration . 15 C.12 Test report . 15 Annex D (normative)
Determination of wear resistance. 16 D.1 Scope . 16 D.2 Principle . 16 D.3 Apparatus . 16 D.4 Test specimen . 16 D.5 Conditioning . 17 D.6 Procedure. 17 D.7 Expression of result . 17 D.8 Test report . 18 Bibliography . 19
EN ISO 24341 length (m)
width (mm) Not less than the nominal values
Tiles:
EN ISO 24342 side length
(mm) Deviation
¶
rá s u
¨ of nominal length up to 0,5 mm maximum
squareness and straightness for side length (mm) Deviation allowed at any point
¶
v r r mm
¶
rá t w > 400 mm
¶
rá u w > 400 mm (intended for welding)
¶
rá w r Total mass per unit area
(average) (g/m2)
Nominal value
ª
s u
¨ EN ISO 23997
«
s r
¨ Overall thickness: (mm) Nominal + 0,13 EN ISO 24346 Average
- 0,10 Individual results
average value ± 0,15 Slip classification :
Annex C (Ramp test) CEN/TS 16165:2016 Annex C, (Pendulum friction Test) Class ESf (footwear) :
Class ESb (barefoot)
Residual indentation (average) (mm)
¶
rá s EN ISO 24343-1 Dimensional stability: ( Variation in each direction EN ISO 23999 sheets and tiles (intended for welding)
¶
rá v
¨
tiles (intended
...