Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

This standard specifies safety requirements to be met by the manufacturer for machines and plant used in foundries for the production of castings in disposable moulds. It takes into account the foreseeable significant hazards due to design, construction and installation that may occur during commissioning, operation, maintenance and decommissioning. It specifies preventative measures and verification means for the elimination or reduction of these hazards. It specifies requirements for information to be provided by the manufacturer to the user on safe operation and maintenance.  This standard applies to the following equipment:  Machinery and plant constructed to condition and/or reclaim foundry sands; Moulding machinery and plants; Coremaking machinery and plants; Knock-out equipment; Other directly associated equipment.  The foreseeable significant hazards covered are listed in clause 5 and include:  mechanical hazards, movement of machinery and workpieces, ejection of material, of liquids and gases, inadequacy of the mechanical strength; explosion, fire, exothermic reactions; contact with hot parts, gases and flames; noise and vibration; thermal heat radiation and conduction; harmful by-products, poisoning, pollution of operators breathing air.   This standard applies to equipment covered by this standard which is placed on the market after the date of issue of this standard.  This standard does not cover the safety requirements for wax- and lost foam pattern production and wax removal equipment and drying ovens.  This standard does not apply to crane installations, winches, continuous conveyors or handling systems which could be an integral part of the above equipment.  The standard does not cover dust reduction equipment.

Sicherheitsanforderungen an Gießereimaschinen und -anlagen der Form- und Kernherstellung und dazugehörige Einrichtungen

Diese Norm legt vom Hersteller zu erfüllende Sicherheitsanforderungen für Maschinen und Anlagen fest, die in Gießerei für die Gußteilherstellung in verlorenen Formen verwendet werden. Sie behandelt die vorhersehbaren signifikanten Gefährdungen aufgrund von Konstruktion, Errichtung und Einbau, die bei Inbetriebnahme, Betrieb, Instandhaltung und Stillegung auftreten können. Schutzmaßnahmen werden festgelegt sowie Maßnahmen zur Feststellung der Übereinstimmung zur Beseitigung oder Verringerung dieser Gefährdungen.

Prescriptions de sécurité applicables aux machines et chantiers de moulage et de noyautage en fonderie et a leurs équipements annexes

Cette norme définit les prescriptions de sécurité auxquelles le fabricant doit soumettre les machines et installations utilisées en fonderie pour la production de pieces coulées en moules perdus. Elle tient compte des phénomenes dangereux significatifs prévisibles provenant de la conception, de la construction et de l'installation qui peuvent survenir lors de la mise en service, du fonctionnement, de la maintenance et de la mise hors service. Elle décrit les mesures de prévention et les moyens de vérification pour éliminer ou réduire ces phénomenes dangereux.

Varnostne zahteve za livarske stroje, stroje za izdelavo jeder in pripadajočo opremo

General Information

Status
Withdrawn
Publication Date
31-Mar-2000
Withdrawal Date
03-Jun-2010
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-May-2010
Due Date
05-Jun-2010
Completion Date
04-Jun-2010

Relations

Buy Standard

Standard
EN 710:2000
English language
85 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 710:2000
01-april-2000
9DUQRVWQH]DKWHYH]DOLYDUVNHVWURMHVWURMH]DL]GHODYRMHGHULQSULSDGDMRþR
RSUHPR
Safety requirements for foundry moulding and coremaking machinery and plant
associated equipment
Sicherheitsanforderungen an Gießereimaschinen und -anlagen der Form- und
Kernherstellung und dazugehörige Einrichtungen
Prescriptions de sécurité applicables aux machines et chantiers de moulage et de
noyautage en fonderie et a leurs équipements annexes
Ta slovenski standard je istoveten z: EN 710:1997
ICS:
25.120.30 Livarska oprema Moulding equipment
SIST EN 710:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 710:2000

---------------------- Page: 2 ----------------------

SIST EN 710:2000

---------------------- Page: 3 ----------------------

SIST EN 710:2000

---------------------- Page: 4 ----------------------

SIST EN 710:2000

---------------------- Page: 5 ----------------------

SIST EN 710:2000

---------------------- Page: 6 ----------------------

SIST EN 710:2000

---------------------- Page: 7 ----------------------

SIST EN 710:2000

---------------------- Page: 8 ----------------------

SIST EN 710:2000

---------------------- Page: 9 ----------------------

SIST EN 710:2000

---------------------- Page: 10 ----------------------

SIST EN 710:2000

---------------------- Page: 11 ----------------------

SIST EN 710:2000

---------------------- Page: 12 ----------------------

SIST EN 710:2000

---------------------- Page: 13 ----------------------

SIST EN 710:2000

---------------------- Page: 14 ----------------------

SIST EN 710:2000

---------------------- Page: 15 ----------------------

SIST EN 710:2000

---------------------- Page: 16 ----------------------

SIST EN 710:2000

---------------------- Page: 17 ----------------------

SIST EN 710:2000

---------------------- Page: 18 ----------------------

SIST EN 710:2000

---------------------- Page: 19 ----------------------

SIST EN 710:2000

---------------------- Page: 20 ----------------------

SIST EN 710:2000

---------------------- Page: 21 ----------------------

SIST EN 710:2000

---------------------- Page: 22 ----------------------

SIST EN 710:2000

---------------------- Page: 23 ----------------------

SIST EN 710:2000

---------------------- Page: 24 ----------------------

SIST EN 710:2000

---------------------- Page: 25 ----------------------

SIST EN 710:2000

---------------------- Page: 26 ----------------------

SIST EN 710:2000

---------------------- Page: 27 ----------------------

SIST EN 710:2000

---------------------- Page: 28 ----------------------

SIST EN 710:2000

---------------------- Page: 29 ----------------------

SIST EN 710:2000

---------------------- Page: 30 ----------------------

SIST EN 710:2000

---------------------- Page: 31 ----------------------

SIST EN 710:2000

---------------------- Page: 32 ----------------------

SIST EN 710:2000

---------------------- Page: 33 ----------------------

SIST EN 710:2000

---------------------- Page: 34 ----------------------

SIST EN 710:2000

---------------------- Page: 35 ----------------------

SIST EN 710:2000

---------------------- Page: 36 ----------------------

SIST EN 710:2000

---------------------- Page: 37 ----------------------

SIST EN 710:2000

---------------------- Page: 38 ----------------------

SIST EN 710:2000

---------------------- Page: 39 ----------------------

SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.