25.120 - Chipless working equipment

This document defines a set of terms and definitions of molding and coremaking machines and other equipment related to non-permanent mold casting process in foundry machinery. It applies to standard development in foundry machinery field, technical documentation, related scientific and technical publication, etc.

This document specifies the dimensions and tolerances, in millimetres, of ejector sleeves with cylindrical head which are used in compression and injection moulds and in diecasting dies. It also gives material guidelines and hardness requirements, and specifies the designation of ejector sleeves with cylindrical head.

This document specifies the dimensions and tolerances of guide pillars, type C, with taper lead and bush, intended for use in press tools. It gives guidance on the materials and specifies the hardness and the designation of guide pillars which meet the requirements of this document.

This document specifies the dimensions and tolerances of guide pillars, type B, intended for use in press tools. These guide pillars can be end-locking, type B1 (see Figure 1), or end-locking with lubrication grooves, type B2 (see Figure 2). It gives guidance on the materials and specifies the hardness and the designation of guide pillars which meet the requirements of this document.

This document specifies the dimensions and tolerances of guide pillars, type D, end-locking pillar with flange, intended for use in press tools. It gives guidance on the materials and specifies the hardness and the designation of guide pillars which meet the requirements of this document.

This document gives an overview on the terms and definitions of foundry machinery that are commonly and widely used. It applies to standard development in the foundry machinery field, technical documentation, related scientific and technical publications, etc.

This document, in addition to ISO 16092-1, specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of the following groups of mechanical presses and mechanical press production systems:
— Group 1: Presses with a part revolution clutch(es);
— Group 2: Presses with a servo drive system (Mechanical servo presses).
NOTE 1 Requirements in this document are essentially applicable to both groups of the mechanical press. If a requir...view more

This document establishes the terms and definitions of the main types of tools for pressing, their features and dimensional characteristics. Some of these terms refer to components whose functions are shown in Figure 1, Figure 2 and Annex A. This document is intended to serve as a reference for users and manufacturers of tools for pressing. This document is used for understanding of technical terms and applicable for communication and trade of tools for pressing. NOTE The figures are given only ...view more

This document specifies the terms generally in use for components of compression and injection moulds and diecasting dies. The function of these components is shown in Figure 1 to Figure 30. NOTE The figures are given as examples. The purpose of this document is to introduce coherent terms in professional terminology particularly with regard to the use in CAD (Computer Aided Drafting). Various symbols are specified for simplified representation on technical drawings.

This document establishes the technical specifications for compression springs made from rectangular wires. The parameters set in this document are applicable to springs which are set. This document does not attempt to specify the quality of the springs themselves, nor all of their dimensions (e.g. cross-section), their material or their length of life. The springs are classified into spring rates: light, medium, strong and extra strong. For each spring rate, this document gives a colour code.

This document specifies the dimensions in millimetres, of mounting base plates, of two-part mounting clamps, of flange mounts and front end supports intended for use in press tool together with gas springs in accordance with ISO 11901‑1, ISO 11901‑3 and ISO 11901‑4. It also gives information concerning materials and specifies the designation of the mounting accessories in accordance with this document.

This document specifies dimensions for heel guidings in large stamping and forming dies. It also gives example applications and an example for ordering.

This document specifies dimensions, stroke and forces of spring plungers with steel spring or gas spring. This document applies to spring plungers which are used in tool manufacture for separating the tool and the sheet-metal part after stamping or forming operations. It also gives information concerning their use and installation example of spring plungers steel spring or gas spring.

This standard specifies technical safety requirements and measures to be adopted by persons undertaking the design (as defined in EN 12100), manufacture and supply of hydraulic presses which are intended to work cold metal or material partly of cold metal.
This standard applies in combination with ISO 16092-1. Both parts together cover all significant hazards relevant for hydraulic presses which are intended to work cold metal or material partly of cold metal, when they are used as intended and...view more

This International standard specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of presses and ancillary devices which are intended to work cold metal or material partly of cold metal.
The requirements in this International standard take account of intended use, as defined in 3.22 of ISO 12100-1:2003. This standard presumes access to the press from all directions, deals with the hazards during the various phases of the life...view more

ISO 16092-3:2017, in addition to ISO 16092‑1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of hydraulic presses which are intended to work cold metal or material partly made up of cold metal.
The presses covered by this document range in size from small high-speed machines with a single operator producing small workpieces to large relatively slow-speed machines with several operators and large complex workpieces...view more

ISO 16092-1:2017 specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of presses which are intended to work cold metal or material partly of cold metal, but which can be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather, etc.).
NOTE 1 The design of a machine includes the study of the machine itself, taking into account all phases of the "life" of the machine mentioned in ISO 12100:...view more

IEC 62841-3-13:2017 applies to transportable drills, with manually fed axial movement of the spindle, having a maximum chuck capacity of 13 mm. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the norm...view more

This part of IEC 62841 applies to hand-held shears and nibblers.

ISO 16916:2016 defines the description and specification of injection moulds to be used when requesting tools (stage of tender) and ordering tools. This International Standard gives data for material acquisition, equipment, structural design of injection moulds including the surfaces of the tool. Information relating to machine-specific data, types of operation and warranty is also contained in this specification sheet. ISO 16916:2016 does not apply to compression moulds and die casting dies.