SIST EN 1715-4:2008

Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications

This Part of prEN 1715 applies to drawing stock of aluminium alloys for welding and specifies characteristics and specific technical conditions for inspection and delivery of these products. The general requirements and technical conditions for inspection and delivery are specified in prEN 1715-1.
This standard does not apply to drawn wire.

Aluminium und Aluminiumlegierungen - Vordraht - Teil 4: Besondere Anforderungen für schweißtechnische Anwendungen

Dieses Dokument (prEN 1715-4:2006) legt die besonderen Anforderungen an Vordraht aus Aluminium und
Aluminiumlegierungen für schweißtechnische Anwendungen fest.
Die allgemeinen Anforderungen und Technischen Lieferbedingungen sind in prEN 1715-1 festgelegt.
Diese Norm gilt nicht für gezogenen Draht.

Aluminium et alliages d'aluminium - Fil machine - Partie 4: Exigences spécifiques pour les applications soudage

Ce document (prEN 1715-4:2006) spécifie les caractéristiques particulieres et les conditions techniques de contrôle et de livraison spécifiques pour le fil machine en aluminium et alliages d'aluminium a soudage.
Les caractéristiques et conditions générales sont spécifiées dans le prEN 1715-1.
Cette norme ne s'applique pas au fil étiré.

Aluminij in aluminijeve zlitine - Vlečeni polizdelki - 4. del: Posebne zahteve za varjenje

General Information

• Status: Published
• Publication Date: 19-May-2008
• ICS: 77.150.10 - Aluminium products
• Technical Committee: INEK - Nonferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-May-2008
• Due Date: 12-Jul-2008
• Completion Date: 20-May-2008
• Ref Project: EN 1715-4:2008 - Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications

Relations

• Replaces: SIST EN 1715-4:1998 - Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications
• Effective Date: 01-Jul-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applicationsYDUMHQMHAluminium et alliages d'aluminium - Fil machine - Partie 4: Exigences spécifiques pour les applications soudageAluminium und Aluminiumlegierungen - Vordraht - Teil 4: Besondere Anforderungen für schweißtechnische Anwendungen77.150.10Aluminijski izdelkiAluminium productsICS:SIST EN 1715-4:2008en,fr,deTa slovenski standard je istoveten z:EN 1715-4:200801-julij-2008SIST EN 1715-4:2008SLOVENSKI
STANDARDSIST EN 1715-4:19981DGRPHãþD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1715-4April 2008ICS 77.150.10Supersedes EN 1715-4:1997
English VersionAluminium and aluminium alloys - Drawing stock - Part 4:Specific requirements for welding applicationsAluminium et alliages d'aluminium - Fil machine - Partie 4:Exigences spécifiques relatives aux applications desoudageAluminium und Aluminiumlegierungen - Vordraht - Teil 4:Besondere Anforderungen für schweißtechnischeAnwendungenThis European Standard was approved by CEN on 14 March 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1715-4:2008: E



EN 1715-4:2008 (E) 2 Contents Page Foreword.3 1 Scope.5 2 Normative references.5 3 Requirements.5 3.1 Chemical composition.5 3.2 Temper for delivery.6 4 Product inspection and testing methods.7 4.1 Chemical composition.7 4.2 Mechanical properties.7 5 Delivery documents and inspection documents.7 6 Marking and packaging.7



EN 1715-4:2008 (E) 3 Foreword This document (EN 1715-4:2008) has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by October 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1715-4:1997. Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 4 "Wires and drawing stock" to revise EN 1715-4:1997. Besides editorial adjustments in the text and update of normative references, the following changes have been made:  Clause 3: text amended; title of Table 1 changed  Clause 4: amended  Clause 5: amended  Clause 6: amended EN 1715 comprises the following parts under the general title "Aluminium and aluminium alloys – Drawing stock":  Part 1: General requirements and technical conditions for inspection and delivery  Part
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applicationsYDUMHQMHAluminium et alliages d'aluminium - Fil machine - Partie 4: Exigences spécifiques pour les applications soudageAluminium und Aluminiumlegierungen - Vordraht - Teil 4: Besondere Anforderungen für schweißtechnische AnwendungenTa slovenski standard je istoveten z:EN 1715-4:2008kSIST prEN 1715-4:2008en77.150.10ICS:SIST EN 1715-4:19981DGRPHãþDSLOVENSKI
STANDARDkSIST prEN 1715-4:200801-julij-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTprEN 1715-4December 2007ICS 77.150.10Will supersede EN 1715-4:1997
English VersionAluminium and aluminium alloys - Drawing stock - Part 4:Specific requirements for welding applicationsAluminium et alliages d'aluminium - Fil machine - Partie 4:Exigences spécifiques relatives aux applications desoudageAluminium und Aluminiumlegierungen - Vordraht - Teil 4:Besondere Anforderungen für schweißtechnischeAnwendungenThis draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC132.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. prEN 1715-4:2007: E



prEN 1715-4:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Requirements.4 3.1 Chemical composition.4 3.2 Temper for delivery.5 4 Product inspection and testing methods.6 4.1 Chemical composition.6 4.2 Mechanical properties.6 5 Delivery documents and inspection documents.6 6 Marking and packaging.6



prEN 1715-4:2007 (E) 3 Foreword This document (prEN 1715-4:2007) has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR. This document is currently submitted to the Formal Vote. This document will supersede EN 1715-4:1997. Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 4 "Wires and drawing stock" to revise EN 1715-4:1997. Besides editorial adjustments in the text and update of normative references, the following changes have been made:  Clause 3: text amended; title of Table 1 changed  Clause 4: amended  Clause 5: amended  Clause 6: amended EN 1715 comprises the following parts under the general title "Aluminium and aluminium alloys – Drawing stock":
...