SIST EN 300 224-2:2002

Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

To draft an EN to be harmonised under the R&TTE Directive.

Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Storitev osebnega klica na kraju samem - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena direktive 3.2 R&TTE

General Information

• Status: Published
• Publication Date: 31-Oct-2002
• Withdrawal Date: 31-Oct-2002
• ICS: 33.060.20 - Receiving and transmitting equipment
• ICS: 33.070.20 - Paging systems
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2002
• Due Date: 01-Nov-2002
• Completion Date: 01-Nov-2002
• Directive: 1999/5/EC - Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
• Directive: TRRTP124 - Splošni akt o načrtu uporabe radijskih frekvenc (NURF-4)
• Mandate: M/284
• Ref Project: ETSI EN 300 224-2 V1.1.1 (2001-01) - Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 224-2:2002
01-september-2002
(OHNWURPDJQHWQD]GUXåOMLYRVW(0&LQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
6WRULWHYRVHEQHJDNOLFDQDNUDMXVDPHPGHO+DUPRQL]LUDQL(1NL]DMHPD
ELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging
service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 300 224-2 Version 1.1.1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.070.20 Sistem za osebni klic Paging systems
SIST EN 300 224-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 224-2:2002

---------------------- Page: 2 ----------------------

SIST EN 300 224-2:2002
ETSI EN 300 224-2 V1.1.1 (2001-01)
Candidate Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
On-site paging service;
Part 2: Harmonized EN under article 3.2
of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 300 224-2:2002
2 ETSI EN 300 224-2 V1.1.1 (2001-01)
Reference
REN/ERM-RP08-0110-2
Keywords
paging, radio, regulation, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone] Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 224-2:2002
3 ETSI EN 300 224-2 V1.1.1 (2001-01)
Contents
Intellectual Property Rights .5
Foreword.5
Introduction.6
1 Scope.8
2 References.8
3 Definitions and abbreviations.9
3.1 Definitions. 9
3.2 Abbreviations . 9
4 Technical requirements specifications .9
4.1 Environmental profile. 9
4.2 Transmitter requirements . 9
4.2.1 Frequency error. 9
4.2.1.1 Definition. 9
4.2.1.2 Limit 9
4.2.2 Carrier power . 9
4.2.2.1 Definition. 9
4.2.2.2 Limit (conducted). 10
4.2.2.3 Limit (radiated) . 10
4.2.3 Adjacent channel power . 10
4.2.3.1 Definition. 10
4.2.3.2 Limit 10
4.2.4 Frequency deviation . 10
4.2.4.1 Definition. 10
4.2.4.2 Limit (analogue signals within the audio bandwidth). 10
4.2.4.3 Limit (analogue signals above the audio bandwidth) . 10
4.2.5 Spurious emissions. 10
4.2.5.1 Definition. 10
4.2.5.2 Limit 10
4.2.6 Transmitter transient behaviour. 10
4.2.6.1 Definition. 10
4.2.6.2 Limit 11
4.3 Receiver requirements (pocket paging receivers). 11
4.3.1 Spurious emissions. 11
4.3.1.1 Definition. 11
4.3.1.2 Limit 11
4.4 Receiver requirements (base station receivers). 11
4.4.1 Spurious emissions. 11
4.4.1.1 Definition. 11
4.4.1.2 Limit 11
4.5 Loop transmitter requirements. 11
4.5.1 Transmitter carrier power . 11
4.5.1.1 Definition. 11
4.5.1.2 Limit 11
4.5.2 Range of operating frequencies. 11
4.5.2.1 Limit 11
4.5.3 Frequency error. 12
4.5.3.1 Definition. 12
4.5.3.2 Limit 12
4.5.4 Spurious emissions. 12
4.5.4.1 Definition. 12
4.5.4.2 Limit 12
4.6 Loop receiver requirements. 12
4.6.1 Spurious emissions. 12
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 224-2:2002
4 ETSI EN 300 224-2 V1.1.1 (2001-01)
4.6.1.1 Definition. 12
4.6.1.2 Limit 12
5 Testing for compliance with technical requirements .12
5.1 Environmental conditions for testing. 12
5.2 Interpretation of the measurement results . 13
5.3 Essential radio test suites . 13
5.3.1 Transmitter test suites. 13
5.3.1.1 Frequency error. 13
5.3.1.2 Carrier power (conducted). 13
5.3.1.3 Carrier power (radiated) . 13
5.3.1.4 Adjacent channel power . 14
5.3.1.5 Frequency deviation . 14
5.3.1.5.1 Analogue signals within the audio handwidth . 14
5.3.1.5.2 Analogue signals above the audio handwidth. 14
5.3.1.6 Spurious emissions. 14
5.3.1.7 Transmitter transient behaviour. 14
5.3.2 Loop transmitter suites . 14
5.3.2.1 Transmitter carrier power . 14
5.3.2.2 Frequency error. 14
5.3.2.3 Spurious emissions. 14
Annex A (normative): The EN Requirements Table (EN-RT).15
History .17
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 224-2:2002
5 ETSI EN 300 224-2 V1.1.1 (2001-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [1].
Technical specifications relevant to Directive 1999/5/EC [1] are given in annex A.
The present document is part 2 of a multi-part deliverable covering the on-site paging service, as identified below:
Part 1: "Technical and functional characteristics, including test methods";
Part 2: "Harmonized Standard under article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 15 December 2000
Date of latest announcement of this EN (doa): 31 March 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 September 2001
Date of withdrawal of any conflicting National Standard (dow): 30 September 2002
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 224-2:2002
6 ETSI EN 300 224-2 V1.1.1 (2001-01)
Introduction
The present document is part of a set of standards designed to fit in a modular structure to cover all radio and
telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure.
The modular structure is shown in figure 1.
Disability*
3.3f
Emergency*
3.3e
Fraud*
3.3d
3.3c
Privacy*
No harm to the network*
3.3b
* If needed
Scoped by
Inter-working via the network*
equipment
3.3a class or type
Inter-working with the network
Spectrum management to avoid
harmful interference to radio
services
3.2
New radio harmonized standards
Scoped by equipment type
Radio Product EMC
New single multi-part standard
3.1b
EMC
Generic and base standards also notified under EMC Directive
New standard for Health for radio
(if needed)
3.1a
Safety
Standards also notified under LVD Directive
(incl acoustic safety if needed)
Non-radio Radio (RE)
TTE Non-TTE
Figure 1: Modular structure for the various standards used under the R&TTE Directive [1]
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 224-2:2002
7 ETSI EN 300 224-2 V1.1.1 (2001-01)
The left hand edge of the figure 1 shows the different subclauses of Article 3 of the R&TTE Directive [1].
For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of this standard
essential requirements in these areas have to be adopted by the Commission. If such essential requirements are adopted,
and as far and as long as they are applicable, they will justify individual standards whose scope is likely to be specified
by function or interface type.
The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment. The
scopes of these standards are specified either by frequency (normally in the case where frequency bands are
harmonized) or by radio equipment type.
For article 3.1b the diagram shows the new single multi-part product EMC standard for radio, and the existing
collection of generic and product standards currently used under the EMC Directive [2]. The parts of this new standard
will become available in the second half of 2000, and the existing separate product EMC standards will be used until it
is available.
For article 3.1a the diagram shows the existing safety standards currently used under the LV Directive [3] and new
standards covering human exposure to electromagnetic fields. New standards covering acoustic safety may also be
required.
The bottom of the figure shows the relationship of the standards to radio equipment and telecommunications terminal
equipment. A particular equipment may be radio equipment, telecommunications terminal equipment or both. A radio
spectrum standard will apply if it is radio equipment. An article 3.3 standard will apply as well only if the relevant
essential requirement under the R&TTE Directive [1] is adopted by the Com
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive33.100.99Drugi vidiki v zvezi z EMCOther aspects related to EMCICS:Ta slovenski standard je istoveten z:EN 300 224-2 Version 1.1.13SIST EN 300 224-2:2002en01-IHEUXDU-2003SIST EN 300 224-2:200SLOVENSKI
STANDARD



SIST EN 300 224-2:2002



DraftETSIEN300224-2V1.1.1(2000-08)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);On-sitepagingservice;Part2:HarmonizedENunderarticle3.2oftheR&TTEDirectiveSIST EN 300 224-2:2002



ETSIDraftETSIEN300224-2V1.1.1(2000-08)2ReferenceREN/ERM-RP08-0110-2Keywordspaging,radio,regulation,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 224-2:2002



ETSIDraftETSIEN300224-2V1.1.1(2000-08)3ContentsIntellectualPropertyRights.5Foreword.5Introduction.61Scope.82References.83Definitions,symbolsandabbreviations.93.1Definitions.93.2Symbols.93.3Abbreviations.94Technicalrequirementsspecifications.94.1Environmentalprofile.94.2Transmitterrequirements.94.2.1Frequencyerror.94.2.1.1Definition.94.2.1.2Limit.94.2.2Carrierpower.104.2.2.1Definition.104.2.2.2Limit(conducted).104.2.2.3Limit(radiated).104.2.3Adjacentchannelpower.104.2.3.1Definition.104.2.3.2Limit.104.2.4Frequencydeviation.104.2.4.1Definition.104.2.4.2Limit(analoguesignalswithintheaudiobandwidth).104.2.4.3Limit(analoguesignalsabovetheaudiobandwidth).104.2.5Spuriousemissions.104.2.5.1Definition.104.2.5.2Limit.104.2.6Transmittertransientbehaviour.114.2.6.1Definition.114.2.6.2Limit.114.3Receiverrequirements(pocketpagingreceivers).114.3.1Spuriousemissions.114.3.1.1Definition.114.3.1.2Limit.114.4Receiverrequirements(basestationreceivers).114.4.1Spuriousemissions.114.4.1.1Definition.114.4.1.2Limit.114.5Looptransmitterrequirements.114.5.1Transmittercarrierpower.114.5.1.1Definition.114.5.1.2Limit.114.5.2Rangeofoperatingfrequencies.124.5.2.1Limit.124.5.3Frequencyerror.124.5.3.1Definition.124.5.3.2Limit.124.5.4Spuriousemissions.124.5.4.1Definition.124.5.4.2Limit.124.6Loopreceiverrequirements.12SIST EN 300 224-2:2002



ETSIDraftETSIEN300224-2V1.1.1(2000-08)44.6.1Spuriousemissions.124.6.1.1Definition.124.6.1.2Limit.125Testingforcompliancewithtechnicalrequirements.125.1Environmentalconditionsfortesting.125.2Interpretationofthemeasurementresults.135.3Essentialradiotestsuites.135.3.1Transmittertestsuites.135.3.1.1Frequencyerror.135.3.1.2Carrierpower(conducted).135.3.1.3Carrierpower(radiated).135.3.1.4Adjacentchannelpower.145.3.1.5Frequencydeviation.145.3.1.5.1Analoguesignalswithintheaudiohandwidth.145.3.1.5.2Analoguesignalsabovetheaudiohandwidth.145.3.1.6Spuriousemissions.145.3.1.7Transmittertransientbehaviour.145.3.2Looptransmittersuites.145.3.2.1Transmittercarrierpower.145.3.2.2Frequencyerror.145.3.2.3Spuriousemissions.14AnnexA(normative):TheENRequirementsTable(EN-RT).15History.17SIST EN 300 224-2:2002



ETSIDraftETSIEN300224-2V1.1.1(2000-08)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeElectromagneticcompatibilityandRadiospectrumMatters(ERM),andisnowsubmittedfortheETSIstandardsOne-stepApprovalProcedure.ThepresentdocumenthasbeenproducedbyETSIinresponsetoamandatefromtheEuropeanCommissionissuedunderCouncilDirective98/34/EC(asamended)layingdownaprocedurefortheprovisionofinformationinthefieldoftechnicalstandardsandregulations.ThepresentdocumentisintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommunitiesreferencingtheDirective1999/5/EC[1]oftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsterminalequipmentandthemutualrecognitionoftheirconformity("theR&TTEDirective")[1].TechnicalspecificationsrelevanttoDirective1999/5/EC[1]aregiveninannexA.Thepresentdocumentispart2ofamulti-partdeliverablecoveringtheon-sitepagingservice,asidentifiedbelow:Part1:"Technicalandfunctionalcharacteristics,includingtestmethods";Part2:"HarmonizedStandardunderarticle3.2oftheR&TTEDirective".ProposednationaltranspositiondatesDateoflatestannouncementofthisEN(doa):3monthsafterETSIpublicationDateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):6monthsafterdoaDateofwithdrawalofanyconflictingNationalStandard(dow):6monthsafterdoaSIST EN 300 224-2:2002



ETSIDraftETSIEN300224-2V1.1.1(2000-08)6IntroductionThepresentdocumentispartofasetofstandardsdesignedtofitinamodularstructuretocoverallradioandtelecommunicationsterminalequipmentundertheR&TTEDirective[1].Eachstandardisamoduleinthestructure.Themodularstructureisshowninfigure1.NewstandardforHealthforradio(ifneeded)*IfneededScopedbyequipmentclassortypeScopedbyequipmenttypeDisability*Privacy*Fraud*Noharmtothenetwork*Emergency*Inter-workingviathenetwork*Inter-workingwiththenetworkNon-radioRadio(RE)Non-TTETTE3.1b3.23.3c3.3b3.3a3.3d3.3e3.3fRadioProductEMCNewsinglemulti-partstandardGenericandbasestandardsalsonotifiedunderEMCDirectiveStandardsalsonotifiedunderLVDDirective(inclacousticsafetyifneeded)3.1aNewradioharmonizedstandardsEMCSafetySpectrummanagementtoavoidharmfulinterferencetoradioservicesFigure1:ModularstructureforthevariousstandardsusedundertheR&TTEDirective[1]SIST EN 300 224-2:2002



ETSIDraftETSIEN300224-2V1.1.1(2000-08)7T
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive33.100.99Drugi vidiki v zvezi z EMCOther aspects related to EMCICS:Ta slovenski standard je istoveten z:EN 300 224-2 Version 1.1.136IST EN 300 224-2:2002en01-VHSWHPEHU-20023SIST EN 300 224-2:2002SLOVENSKI
STANDARD



SIST EN 300 224-2:2002



ETSIEN300224-2V1.1.1(2001-01)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);On-sitepagingservice;Part2:HarmonizedENunderarticle3.2oftheR&TTEDirectiveSIST EN 300 224-2:2002



ETSIETSIEN300224-2V1.1.1(2001-01)2ReferenceREN/ERM-RP08-0110-2Keywordspaging,radio,regulation,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 224-2:2002



ETSIETSIEN300224-2V1.1.1(2001-01)3ContentsIntellectualPropertyRights.5Foreword.5Introduction.61Scope.82References.83Definitionsandabbreviations.93.1Definitions.93.2Abbreviations.94Technicalrequirementsspecifications.94.1Environmentalprofile.94.2Transmitterrequirements.94.2.1Frequencyerror.94.2.1.1Definition.94.2.1.2Limit94.2.2Carrierpower.94.2.2.1Definition.94.2.2.2Limit(conducted).104.2.2.3Limit(radiated).104.2.3Adjacentchannelpower.104.2.3.1Definition.104.2.3.2Limit104.2.4Frequencydeviation.104.2.4.1Definition.104.2.4.2Limit(analoguesignalswithintheaudiobandwidth).104.2.4.3Limit(analoguesignalsabovetheaudiobandwidth).104.2.5Spuriousemissions.104.2.5.1Definition.104.2.5.2Limit104.2.6Transmittertransientbehaviour.104.2.6.1Definition.104.2.6.2Limit114.3Receiverrequirements(pocketpagingreceivers).114.3.1Spuriousemissions.114.3.1.1Definition.114.3.1.2Limit114.4Receiverrequirements(basestationreceivers).114.4.1Spuriousemissions.114.4.1.1Definition.114.4.1.2Limit114.5Looptransmitterrequirements.114.5.1Transmittercarrierpower.114.5.1.1Definition.114.5.1.2Limit114.5.2Rangeofoperatingfrequencies.114.5.2.1Limit114.5.3Frequencyerror.124.5.3.1Definition.124.5.3.2Limit124.5.4Spuriousemissions.124.5.4.1Definition.124.5.4.2Limit124.6Loopreceiverrequirements.124.6.1Spuriousemissions.12SIST EN 300 224-2:2002



ETSIETSIEN300224-2V1.1.1(2001-01)44.6.1.1Definition.124.6.1.2Limit125Testingforcompliancewithtechnicalrequirements.125.1Environmentalconditionsfortesting.125.2Interpretationofthemeasurementresults.135.3Essentialradiotestsuites.135.3.1Transmittertestsuites.135.3.1.1Frequencyerror.135.3.1.2Carrierpower(conducted).135.3.1.3Carrierpower(radiated).135.3.1.4Adjacentchannelpower.145.3.1.5Frequencydeviation.145.3.1.5.1Analoguesignalswithintheaudiohandwidth.145.3.1.5.2Analoguesignalsabovetheaudiohandwidth.145.3.1.6Spuriousemissions.145.3.1.7Transmittertransientbehaviour.145.3.2Looptransmittersuites.145.3.2.1Transmittercarrierpower.145.3.2.2Frequencyerror.145.3.2.3Spuriousemissions.14AnnexA(normative):TheENRequirementsTable(EN-RT).15History.17SIST EN 300 224-2:2002



ETSIETSIEN300224-2V1.1.1(2001-01)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeElectromagneticcompatibilityandRadiospectrumMatters(ERM).ThepresentdocumenthasbeenproducedbyETSIinresponsetoamandatefromtheEuropeanCommissionissuedunderCouncilDirective98/34/EC(asamended)layingdownaprocedurefortheprovisionofinformationinthefieldoftechnicalstandardsandregulations.ThepresentdocumentisintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommunitiesreferencingtheDirective1999/5/EC[1]oftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsterminalequipmentandthemutualrecognitionoftheirconformity("theR&TTEDirective")[1].TechnicalspecificationsrelevanttoDirective1999/5/EC[1]aregiveninannexA.Thepresentdocumentispart2ofamulti-partdeliverablecoveringtheon-sitepagingservice,asidentifiedbelow:Part1:"Technicalandfunctionalcharacteristics,includingtestmethods";Part2:"HarmonizedStandardunderarticle3.2oftheR&TTEDirective".NationaltranspositiondatesDateofadoptionofthisEN:15December2000DateoflatestannouncementofthisEN(doa):31March2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):30September2001DateofwithdrawalofanyconflictingNationalStandard(dow):30September2002SIST EN 300 224-2:2002



ETSIETSIEN300224-2V1.1.1(2001-01)6IntroductionThepresentdocumentispartofasetofstandardsdesignedtofitinamodularstructuretocoverallradioandtelecommunicationsterminalequipmentundertheR&TTEDirective[1].Eachstandardisamoduleinthestructure.Themodularstructureisshowninfigure1.NewstandardforHealthforradio(ifneeded)*IfneededScopedbyequipmentclassortypeScopedbyequipmenttypeDisability*Privacy*Fraud*Noharmtothenetwork*Emergency*Inter-workingviathenetwork*Inter-workingwiththenetworkNon-radioRadio(RE)Non-TTETTE3.1b3.23.3c3.3b3.3a3.3d3.3e3.3fRadioProductEMCNewsinglemulti-partstandardGenericandbasestandardsalsonotifiedunderEMCDirectiveStandardsalsonotifiedunderLVDDirective(inclacousticsafetyifneeded)3.1aNewradioharmonizedstandardsEMCSafetySpectrummanagementtoavoidharmfulinterferencetoradioservicesFigure1:ModularstructureforthevariousstandardsusedundertheR&TTEDirective[1]SIST EN 300 224-2:2002



ETSIETSIEN300224-2V1.1.1(2001-01)7Thelefthandedgeofthefigure1showsthedifferentsubclausesofArticle3oftheR&TTEDirective[1].Forarticle3.3varioushorizontalboxesareshown.DottedlinesindicatethatatthetimeofpublicationofthisstandardessentialrequirementsintheseareashavetobeadoptedbytheCommission.Ifsuchessentialrequirementsareadopted,andasfarandaslongastheyareapplicable,theywilljustifyindividualstandardswhosescopeislikelytobespecifiedbyfunctionorinterfacetype.Theverticalboxesshowthestandardsunderarticle3.2fortheuseoftheradiospectrumbyradioequipment.Thescopesofthesestandardsarespecifiedeitherbyfrequency(normallyinthecasewherefrequencybandsareharmonized)orbyradioequipmenttype.Forarticle3.1bthediagramshowsthenewsinglemulti-partproductEMCstandardforradio,andtheexistingcollectionofgenericandproductstandardscurrentlyusedundertheEMCDirective[2].Thepartsofthisnewstandardwillbecomeavailableinthesecondhalfof2000,a
...