SIST EN ISO 9988-2:2015
(Main)Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
See N896
Kunststoffe - Polyoxymethylen-(POM-)Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 9988-2:2006)
Plastiques - Matériaux à base de polyoxyméthylène (POM) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 9988-2:2006)
Polimerni materiali - Materiali na osnovi polioksimetilena (PMMA) za oblikovanje in ekstrudiranje - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO 9988-2:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9988-2:2015
01-junij-2015
Polimerni materiali - Materiali na osnovi polioksimetilena (PMMA) za oblikovanje in
ekstrudiranje - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO 9988-
2:2006)
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2:
Preparation of test specimens and determination of properties (ISO 9988-2:2006)
Kunststoffe - Polyoxymethylen-(POM-)Formmassen - Teil 2: Herstellung von
Probekörpern und Bestimmung von Eigenschaften (ISO 9988-2:2006)
Plastiques - Matériaux à base de polyoxyméthylène (POM) pour moulage et extrusion -
Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 9988-2:2006)
Ta slovenski standard je istoveten z: EN ISO 9988-2:2015
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 9988-2:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9988-2:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 9988-2:2015
EUROPEAN STANDARD
EN ISO 9988-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2015
ICS 83.080.20
English Version
Plastics - Polyoxymethylene (POM) moulding and extrusion
materials - Part 2: Preparation of test specimens and
determination of properties (ISO 9988-2:2006)
Plastiques - Matériaux à base de polyoxyméthylène (POM) Kunststoffe - Polyoxymethylen-(POM-)Formmassen - Teil 2:
pour moulage et extrusion - Partie 2: Préparation des Herstellung von Probekörpern und Bestimmung von
éprouvettes et détermination des propriétés (ISO 9988- Eigenschaften (ISO 9988-2:2006)
2:2006)
This European Standard was approved by CEN on 1 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9988-2:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9988-2:2015
EN ISO 9988-2:2015 (E)
Contents
Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9988-2:2015
EN ISO 9988-2:2015 (E)
Foreword
The text of ISO 9988-2:2006 has been prepared by Technical Committee ISO/TC 61 “Plastics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 9988-2:2015 by
Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2015, and conflicting national standards shall be
withdrawn at the latest by September 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9988-2:2006 has been approved by CEN as EN ISO 9988-2:2015 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 9988-2:2015
---------------------- Page: 6 ----------------------
SIST EN ISO 9988-2:2015
INTERNATIONAL ISO
STANDARD 9988-2
Third edition
2006-07-15
Plastics — Polyoxymethylene (POM)
moulding and extrusion materials —
Part 2:
Preparation of test specimens
and determination of properties
Plastiques — Matériaux à base de polyoxyméthylène (POM) pour
moulage et extrusion —
Partie 2: Préparation des éprouvettes et détermination des propriétés
Reference number
ISO 9988-2:2006(E)
©
ISO 2006
---------------------- Page: 7 ----------------------
SIST EN ISO 9988-2:2015
ISO 9988-2:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 9988-2:2015
ISO 9988-2:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9988-2 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic
materials.
This third edition cancels and replaces the second edition (ISO 9988-2:1999), which has been technically
revised to bring Table 2 and the normative references into continuity with ISO 10350-1:1998. Copolymer, high
modulus, MFR u 4 has been added to Table 1.
ISO 9988 consists of the following parts, under the general title Plastics — Polyoxymethylene (POM) moulding
and extrusion materials:
— Part 1: Designation system and basis for specifications
— Part 2: Preparation of test specimens and determination of properties
© ISO 2006 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 9988-2:2015
---------------------- Page: 10 ----------------------
SIST EN ISO 9988-2:2015
INTERNATIONAL STANDARD ISO 9988-2:2006(E)
Plastics — Polyoxymethylene (POM) moulding and extrusion
materials —
Part 2:
Preparation of test specimens and determination of properties
1 Scope
This part of ISO 9988 specifies the methods of preparation of test specimens and the test methods to be used
in determining the properties of polyoxymethylene moulding and extrusion materials. Requirements for
handling test material and for conditioning both the test material before moulding and the specimens before
testing are given.
Procedures and conditions are described for the preparation of test specimens, and procedures are given for
measuring properties of the materials from which these specimens are made. Properties and test methods
which are suitable and necessary to characterize polyoxymethy
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffe - Polyoxymethylen-(POM-)Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 9988-2:2006)Plastiques - Matériaux à base de polyoxyméthylène (POM) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 9988-2:2006)Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)83.080.20PlastomeriThermoplastic materialsICS:Ta slovenski standard je istoveten z:FprEN ISO 9988-2kSIST FprEN ISO 9988-2:2014en01-november-2014kSIST FprEN ISO 9988-2:2014SLOVENSKI
STANDARD
kSIST FprEN ISO 9988-2:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN ISO 9988-2
August 2014 ICS 83.080.20 English Version
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
Plastiques - Matériaux à base de polyoxyméthylène (POM) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 9988-2:2006)
Kunststoffe - Polyoxymethylen-(POM-)Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 9988-2:2006) This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 249.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN ISO 9988-2:2014 EkSIST FprEN ISO 9988-2:2014
FprEN ISO 9988-2:2014 (E) 2 Contents
Page Foreword .3
kSIST FprEN ISO 9988-2:2014
FprEN ISO 9988-2:2014 (E) 3 Foreword The text of ISO 9988-2:2006 has been prepared by Technical Committee ISO/TC 61 “Plastics” of the International Organization for Standardization (ISO) and has been taken over as FprEN ISO 9988-2:2014 by Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN. This document is currently submitted to the Unique Acceptance Procedure. Endorsement notice The text of ISO 9988-2:2006 has been approved by CEN as FprEN ISO 9988-2:2014 without any modification.
kSIST FprEN ISO 9988-2:2014
kSIST FprEN ISO 9988-2:2014
Reference numberISO 9988-2:2006(E)© ISO 2006
INTERNATIONAL STANDARD ISO9988-2Third edition2006-07-15Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties Plastiques — Matériaux à base de polyoxyméthylène (POM) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés
kSIST FprEN ISO 9988-2:2014
ISO 9988-2:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii
© ISO 2006 – All rights reserved
kSIST FprEN ISO 9988-2:2014
ISO 9988-2:2006(E) © ISO 2006 – All rights reserved
iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 9988-2 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic materials. This third edition cancels and replaces the second edition (ISO 9988-2:1999), which has been technically revised to bring Table 2 and the normative references into continuity with ISO 10350-1:1998. Copolymer, high modulus, MFR u 4 has been added to Table 1. ISO 9988 consists of the following parts, under the general title Plastics — Polyoxymethylene (POM) moulding and extrusion materials: — Part 1: Designation system and basis for specifications — Part 2: Preparation of test specimens and determination of properties
kSIST FprEN ISO 9988-2:2014
kSIST FprEN ISO 9988-2:2014
INTERNATIONAL STANDARD ISO 9988-2:2006(E) © ISO 2006 – All rights reserved
1Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties 1 Scope This part of ISO 9988 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyoxymethylene moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given. Procedures and conditions are described for the preparation of test specimens, and procedures are given for measuring properties of the materials from which these specimens are made. Properties and test methods which are suitable and necessary to characterize polyoxymethylene moulding and extrusion materials are listed. The properties have been selected from the general test methods in ISO 10350-1:1998. Other test methods in wide use for, or of particular significance to, these moulding and extrusion materials are also included in this part of ISO 9988 as designatory properties specified in ISO 9988-1: melt flow rate and tensile modulus. In order to obtain reproducible and comparable test results, it is necessary to use the methods of sp
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.