SIST EN 13286-41:2022

Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures

This document describes a test method for the determination of the compressive strength of specimens of hydraulically bound mixtures. This document applies to specimens manufactured in the laboratory or prepared from cores.

Ungebundene und hydraulisch gebundene Gemische - Teil 41: Prüfverfahren zur Bestimmung der Druckfestigkeit hydraulisch gebundener Gemische

Dieses Dokument beschreibt ein Prüfverfahren zur Bestimmung der Druckfestigkeit von Probekörpern hydraulisch gebundener Gemische (HBM). Dieses Dokument gilt sowohl für im Labor als auch für aus Bohrkernen hergestellte Probekörper.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 41: Méthode d'essai pour la détermination de la résistance à la compression des mélanges traités aux liants hydrauliques

Le présent document décrit une méthode d’essai pour la détermination de la résistance à la compression des éprouvettes de matériaux traités aux liants hydrauliques. Le présent document s’applique aux éprouvettes confectionnées en laboratoire ou obtenues à partir de carottes.

Nevezane in hidravlično vezane zmesi - 41. del: Preskusna metoda za ugotavljanje tlačne trdnosti hidravlično vezanih zmesi

Ta dokument opisuje preskusno metodo za ugotavljanje tlačne trdnosti primerkov hidravlično vezanih zmesi. Ta dokument se uporablja za primerke, izdelane v laboratoriju oziroma pripravljene iz izvrtkov.

General Information

• Status: Published
• Public Enquiry End Date: 19-Jan-2021
• Publication Date: 02-Dec-2021
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 18-Nov-2021
• Due Date: 23-Jan-2022
• Completion Date: 03-Dec-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Ref Project: EN 13286-41:2021 - Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures

Relations

• Replaces: SIST EN 13286-41:2004 - Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
• Effective Date: 10-Nov-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13286-41:2022
01-januar-2022
Nadomešča:
SIST EN 13286-41:2004
Nevezane in hidravlično vezane zmesi - 41. del: Preskusna metoda za ugotavljanje
tlačne trdnosti hidravlično vezanih zmesi
Unbound and hydraulically bound mixtures - Part 41: Test method for the determination
of the compressive strength of hydraulically bound mixtures
Ungebundene und hydraulisch gebundene Gemische - Teil 41: Prüfverfahren zur
Bestimmung der Druckfestigkeit hydraulisch gebundener Gemische
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 41: Méthode
d'essai pour la détermination de la résistance à la compression des mélanges traités aux
liants hydrauliques
Ta slovenski standard je istoveten z: EN 13286-41:2021
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 13286-41:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13286-41:2022

---------------------- Page: 2 ----------------------
SIST EN 13286-41:2022


EN 13286-41
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2021
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 13286-41:2003
English Version

Unbound and hydraulically bound mixtures - Part 41: Test
method for the determination of the compressive strength
of hydraulically bound mixtures
Mélanges traités et mélanges non traités aux liants Ungebundene und hydraulisch gebundene Gemische -
hydrauliques - Partie 41: Méthode d'essai pour la Teil 41: Prüfverfahren zur Bestimmung der
détermination de la résistance à la compression des Druckfestigkeit hydraulisch gebundener Gemische
mélanges traités aux liants hydrauliques
This European Standard was approved by CEN on 5 July 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13286-41:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13286-41:2022
EN 13286-41:2021 (E)
Contents Page

European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 6
5.1 Compression testing machine . 6
6 Test specimen . 6
7 Test procedure . 6
7.1 Dimensions. 6
7.2 Mass . 6
7.3 Adjustment of the test specimen . 6
7.4 Defective specimens . 6
7.5 Specimen positioning . 7
7.6 Loading . 7
7.7 Assessment of type of failure . 7
8 Expression of result . 8
9 Test report . 8
9.1 Compulsory information . 8
9.2 Optional information . 9


2

---------------------- Page: 4 ----------------------
SIST EN 13286-41:2022
EN 13286-41:2021 (E)
European foreword
This document (EN 13286-41:2021) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2022, and conflicting national standards shall be
withdrawn at the latest by May 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersede EN 13286-41:2003.
The following changes have been made in comparison with EN 13286-41:2003:
— editorial changes;
— to cater for the wide range of strengths possible for hydraulically bound mixtures – from < 1 MPa
to 50 MPa or more - an increase in the permitted ‘time window’ for rupture of the specimen.
This document is one of a series of standards as listed below.
— EN 13286-1, Unbound and hydraulically bound mixtures — Part 1: Test methods for laboratory
reference density and water content — Introduction, general requirements and sampling
— EN 13286-2, Unbound and hydraulically bound mixtures — Part 2: Test methods for laboratory
reference density and water content — Proctor compaction
— EN 13286-3, Unbound and hydraulically bound mixtures — Part 3: Test methods for laboratory
reference density and water content — Vibrocompression with controlled parameters
— EN 13286-4, Unbound and hydraulically bound mixtures — Part 4: Test methods for laboratory
reference density and water content — Vibrating hammer
— EN 13286-5, Unbound and hydraulically bound mixtures — Part 5: Test methods for laboratory
reference density and water content — Vibrating table
— EN 13286-7, Unbound and hydraulically bound mixtures — Part 7: Cyclic load triaxial test for
unbound mixtures
— EN 13286-40, Unbound and hydraulically bound mixtures — Part 40: Test method for the
determination of the direct tensile strength of hydraulically bound mixtures
— EN 13286-41, Unbound and hydraulically bound mixtures — Part 41: Test method for the
determination of the compressive strength of hydraulically bound mixtures
— EN 13286-42, Unbound and hydraulically bound mixtures — Part 42: Test method for the
determination of the indirect tensile strength of hydraulically bound mixtures
— EN 13286-43, Unbound and hydraulically bound mixtures — Part 43: Test method for the
determination of the modulus of elasticity of hydraulically bound mixtures
3

---------------------- Page: 5 ----------------------
SIST EN 13286-41:2022
EN 13286-41:2021 (E)
— EN 13286-44, Unbound and hydraulically bound mixtures — Part 44: Test method for the
determination of the alpha coefficient of vitrified blastfurnace slag
— EN 13286-45, Unbound and hydraulically bound mixtures — Test methods — Part 45: Test method
for the determination of the workability period of hydraulically bound mixtures
— EN 13286-46, Unbound and hydraulically bound mixtures — Part 46: Test method for the
determination of the moisture condition value
— EN 13286-47, Unbound and hydraulically bound mixtures — Part 47: Test methods for the
determination of California bearing ratio, immediate bearing index and linear swelling
— EN 13286-48, Unbound and hydraulically bound mixtures — Part 48: Test method for the
determination of the degree of pulverisation
— EN 13286-49, Unbound and hydraulically bound mixtures — Part 49: Test method for the
determination of the accelerated swelling of soil treated by lime and/or hydraulic binder
— EN 13286-50, Unbound and hydraulically bound mixtures — Part 50: Method for the manufacture
of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table
compaction
— EN 13286-51, Unbound and hydraulically bound mixtures — Part 51: Method for the manufacture
of test specimens of hydraulically bound mixtures using vibrating hammer compaction
— EN 13286-52, Unbound and hydraulically bound mixtures — Part 52: Method for the manufacture
of test specimens of hydraulically bound mixtures using vibrocompression
— EN 13286-53, Unbound and hydraulically bound mixtures — Part 53: Method for the manufacture
of test specimens of hydraulically bound mixtures using axial compression
— CEN/TS 13286-54, Unbound and hydraulically bound mixtures — Part 54: Test method for the
determination of frost susceptibility — Resistance to freezing and thawing of hydraulically bound
mixtures
Any feedback and questions on this document should be directed to the users’ national stan
...

SLOVENSKI STANDARD
oSIST prEN 13286-41:2021
01-januar-2021
Nevezane in hidravlično vezane zmesi - 41. del: Preskusna metoda za ugotavljanje
tlačne trdnosti hidravlično vezanih zmesi
Unbound and hydraulically bound mixtures — Part 41: Test method for the determination
of the compressive strength of hydraulically bound mixtures
Ungebundene und hydraulisch gebundene Gemische - Teil 41: Prüfverfahren zur
Bestimmung der Druckfestigkeit hydraulisch gebundener Gemische
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 41: Méthode
d'essai pour la détermination de la résistance à la compression des mélanges traités aux
liants hydrauliques
Ta slovenski standard je istoveten z: prEN 13286-41
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 13286-41:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13286-41:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13286-41:2021


DRAFT
EUROPEAN STANDARD
prEN 13286-41
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2020
ICS 93.080.20 Will supersede EN 13286-41:2003
English Version

Unbound and hydraulically bound mixtures - Part 41: Test
method for the determination of the compressive strength
of hydraulically bound mixtures
Mélanges traités et mélanges non traités aux liants Ungebundene und hydraulisch gebundene Gemische -
hydrauliques - Partie 41: Méthode d'essai pour la Teil 41: Prüfverfahren zur Bestimmung der
détermination de la résistance à la compression des Druckfestigkeit hydraulisch gebundener Gemische
mélanges traités aux liants hydrauliques
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13286-41:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13286-41:2021
prEN 13286-41:2020 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 6
5.1 Compression testing machine . 6
6 Test specimen . 6
7 Test procedure . 6
7.1 Dimensions. 6
7.2 Mass . 6
7.3 Adjustment of the test specimen . 6
7.4 Defective specimens . 6
7.5 Specimen positioning . 7
7.6 Loading . 7
7.7 Assessment of type of failure . 7
8 Expression of result . 8
9 Test report . 8
9.1 Compulsory information . 8
9.2 Optional information . 9
2

---------------------- Page: 4 ----------------------
oSIST prEN 13286-41:2021
prEN 13286-41:2020 (E)
European foreword
This document (prEN 13286-41:2020) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13286-41:2003.
The following changes have been made in comparison with EN 13286-41:2003:
— editorial changes;
— to cater for the wide range of strengths possible for hydraulically bound mixtures – from < 1 MPa
to 50 MPa or more;
— an increase in the permitted ‘time window’ for rupture of the specimen.
This document is one of a series of standards as listed below.
— EN 13286-1, Unbound and hydraulically bound mixtures — Part 1: Test methods for laboratory
reference density and water content — Introduction, general requirements and sampling
— EN 13286-2, Unbound and hydraulically bound mixtures — Part 2: Test methods for laboratory
reference density and water content — Proctor compaction
— EN 13286-3, Unbound and hydraulically bound mixtures — Part 3: Test methods for laboratory
reference density and water content — Vibrocompression with controlled parameters
— EN 13286-4, Unbound and hydraulically bound mixtures — Part 4: Test methods for laboratory
reference density and water content — Vibrating hammer
— EN 13286-5, Unbound and hydraulically bound mixtures — Part 5: Test methods for laboratory
reference density and water content — Vibrating table
— EN 13286-7, Unbound and hydraulically bound mixtures — Part 7: Cyclic load triaxial test for
unbound mixtures
— EN 13286-40, Unbound and hydraulically bound mixtures — Part 40: Test method for the
determination of the direct tensile strength of hydraulically bound mixtures
— EN 13286-41, Unbound and hydraulically bound mixtures — Part 41: Test method for the
determination of the compressive strength of hydraulically bound mixtures
— EN 13286-42, Unbound and hydraulically bound mixtures — Part 42: Test method for the
determination of the indirect tensile strength of hydraulically bound mixtures
— EN 13286-43, Unbound and hydraulically bound mixtures — Part 43: Test method for the
determination of the modulus of elasticity of hydraulically bound mixtures
— EN 13286-44, Unbound and hydraulically bound mixtures — Part 44: Test method for the
determination of the alpha coefficient of vitrified blastfurnace slag
3

---------------------- Page: 5 ----------------------
oSIST prEN 13286-41:2021
prEN 13286-41:2020 (E)
— EN 13286-45, Unbound and hydraulically bound mixtures — Test methods — Part 45: Test method
for the determination of the workability period of hydraulically bound mixtures
— EN 13286-46, Unbound and hydraulically bound mixtures — Part 46: Test method for the
determination of the moisture condition value
— EN 13286-47, Unbound and hydraulically bound mixtures — Part 47: Test methods for the
determination of California bearing ratio, immediate bearing index and linear swelling
— EN 13286-48, Unbound and hydraulically bound mixtures — Part 48: Test method for the
determination of the degree of pulverisation
— EN 13286-49, Unbound and hydraulically bound mixtures — Part 49: Test method for the
determination of the accelerated swelling of soil treated by lime and/or hydraulic binder
— EN 13286-50, Unbound and hydraulically bound mixtures — Part 50: Method for the manufacture
of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table
compaction
— EN 13286-51, Unbound and hydraulically bound mixtures — Part 51: Method for the manufacture
of test specimens of hydraulically bound mixtures using vibrating hammer compaction
— EN 13286-52, Unbound and hydraulically bound mixtures — Part 52: Method for the manufacture
of test specimens of hydraulically bound mixtures using vibrocompression
— EN 13286-53, Unbound and hydraulically bound mixtures — Part 53: Method for the manufacture
of test specimens of hydraulically bound mixtures using axial com
...