SIST EN 13286-53:2005

Unbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression

This document specifies a test method for making cylindrical specimens of hydraulically bound mixtures to a predetermined density and moisture content by axial compression. This document applies to mixtures, or that part of a mixture, containing aggregate up to a maximum size of 22,4 mm, and for mixtures that have sufficient fines or cohesion to allow extrusion without damage immediately after compaction.

Ungebundene und hydraulisch gebundene Gemische - Teil 53: Verfahren zur Herstellung von Probekörpern von hydraulisch gebundenen Gemischen durch axialen Druck

Diese Europäische Norm legt das Verfahren fest, nach dem zylindrische Probekörper mit bestimmten, zuvor festgelegten Werten für Dichte und Wassergehalt herzustellen sind. Das Verfahren ist für die Gemische oder den Teil eines Gemisches mit Korngrößen von maximal 22 mm sowie für Gemische mit ausreichendem Feinkorn oder ausreichender ¿Kohäsion' geeignet, so dass der Prüfkörper nicht beschädigt wird, wenn er unmittelbar nach dem Verdichten aus der Form entnommen wird.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 53: Méthode de confection par compression axiale des éprouvettes de matériaux traités aux liants hydrauliques

Ce document décrit la méthode de fabrication, par compression axiale, d'éprouvettes cylindriques de masse volumique apparente et de teneur en eau prédéfinies. Cette méthode s'applique aux mélanges ou à la partie d'un mélange contenant des granulats d'une dimension maximale de 22,4 mm, ainsi qu'aux mélanges disposant d'une quantité de fines ou d'une cohésion suffisantes pour permettre une extrusion sans détérioration immédiatement après le compactage.

Nevezane in hidravlično vezane zmesi – 53. del: Metode (postopki) za izdelavo preskušancev iz hidravlično vezanih zmesi z uporabo osnega zgoščevanja

General Information

• Status: Published
• Publication Date: 31-May-2005
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jun-2005
• Due Date: 01-Jun-2005
• Completion Date: 01-Jun-2005
• Ref Project: EN 13286-53:2004 - Unbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression

Relations

• Refers: SIST EN 933-2:2020 - Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 14227-13:2006 - Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 14227-3:2005 - Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound mixtures
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 14227-10:2006 - Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 14227-12:2006 - Hydraulically bound mixtures - Specifications - Part 12: Soil treated by slag
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 13286-42:2004 - Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 14227-2:2013 - Hydraulically bound mixtures - Specifications - Part 2: Slag bound mixtures
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 14227-5:2005 - Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound mixtures
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 14227-5:2013 - Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound mixtures
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 13286-41:2004 - Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 14227-1:2013 - Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 13286-49:2004 - Unbound and hydraulically bound mixtures - Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 16907-4:2019 - Earthworks - Part 4: Soil treatment with lime and/or hydraulic binders
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 14227-14:2006 - Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 14227-3:2013 - Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound mixtures
• Effective Date: 28-Jan-2026

Overview

SIST EN 13286-53:2005 specifies a standardized method for manufacturing cylindrical test specimens of hydraulically bound mixtures by axial compression. Developed by the Slovenian Institute for Standardization (SIST) and harmonized with EN 13286-53:2004, this standard ensures consistency and reliability in preparing specimens for laboratory testing, especially for road construction materials. The document is applicable to mixtures containing aggregates up to 22.4 mm and having sufficient cohesion to enable extrusion without fracture immediately after compaction.

Key Topics

• Test Method Specification: Details the step-by-step process for compressing a hydraulically bound mixture to a predefined density and moisture content, using axial pressure in a mould.
• Applicability: The method is intended for mixtures with aggregate sizes no greater than 22.4 mm and sufficient fines or binder content to allow specimen handling directly after compaction.
• Equipment and Procedures:
  • Use of cylindrical moulds and displacing collars to minimize density gradients.
  • Application of axial compression using a press or compression testing machine.
  • Precise calculation of mixture mass based on required density and moisture.
• Specimen Storage and Reporting:
  • Guidance for storing specimens in controlled environments to prevent moisture loss.
  • Requirements for documenting test conditions, sample properties, and any procedural deviations.
• Quality and Repeatability: By adhering to the defined procedure, laboratories achieve reproducible test conditions and representative mechanical properties for construction materials.

Applications

SIST EN 13286-53:2005 finds practical value in the following areas:

• Road Construction and Civil Engineering Laboratories: Applied routinely to assess the mechanical properties of hydraulically bound mixtures used in road sub-bases, bases, and other construction layers.
• Mixture Design Optimization: Enables reliable comparison of different binders, aggregate gradings, and moisture levels, supporting the selection of optimal material combinations.
• Quality Control: Essential for verifying that construction materials meet specified performance standards before implementation on site.
• Compliance Testing: Ensures materials adhere to contractual and regulatory requirements by producing standardized test specimens for further mechanical testing (e.g., compressive strength).

Related Standards

The preparation of test specimens forms a foundation for further mechanical and durability testing as prescribed in related standards. Key related documents include:

• EN 933-2: Tests for geometrical properties of aggregates – Particle size distribution.
• EN 13286-1: Introduction to test methods for density and water content of unbound/hydraulically bound mixtures.
• EN 13286 series (Parts 2-7, 40-53): Covering various laboratory compaction techniques, density determination, triaxial tests, and determination of compressive, tensile strengths, and other key properties of hydraulically bound materials.
• EN 13286-50 to EN 13286-52: Methods for specimen manufacture using alternative compaction equipment (Proctor, vibrating table, vibrating hammer, and vibrocompression).

By integrating SIST EN 13286-53:2005 into laboratory routines, organizations ensure that the assessment of hydraulically bound mixtures is both consistent and in line with European best practices for road construction material testing. This alignment supports material validation, enhances project reliability, and strengthens compliance with industry standards.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YDQMDUngebundene und hydraulisch gebundene Gemische - Teil 53: Verfahren zur Herstellung von Probekörpern von hydraulisch gebundenen Gemischen durch axialen DruckMélanges traités et mélanges non traités aux liants hydrauliques - Partie 53: Méthode de confection par compression axiale des éprouvettes de matériaux traités aux liants hydrauliquesUnbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-53:2004SIST EN 13286-53:2005en01-junij-2005SIST EN 13286-53:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-53December 2004ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 53: Methodsfor the manufacture of test specimens of hydraulically boundmixtures using axial compressionMélanges traités et mélanges non traités aux liantshydrauliques - Partie 53: Méthode de confection parcompression axiale des éprouvettes de matériaux traitésaux liants hydrauliquesUngebundene und hydraulisch gebundene Gemische - Teil53: Verfahren zur Herstellung von Probekörpern vonhydraulisch gebundenen Gemischen durch axialen DruckThis European Standard was approved by CEN on 12 November 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-53:2004: ESIST EN 13286-53:2005
...