Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures

This document describes a test method for the determination of the compressive strength of specimens of hydraulically bound mixtures. This document applies to specimens manufactured in the laboratory or prepared from cores.

Ungebundene und hydraulisch gebundene Gemische - Teil 41: Prüfverfahren zur Bestimmung der Druckfestigkeit hydraulisch gebundener Gemische

Dieses Dokument beschreibt ein Prüfverfahren zur Bestimmung der Druckfestigkeit von Probekörpern hydraulisch gebundener Gemische. Dieses Dokument gilt sowohl für im Labor als auch für aus Bohrkernen hergestellte Probekörper.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 41 : Méthode d'essai pour la détermination de la résistance à la compression des graves traitées aux liants hydrauliques

Le présent document décrit une méthode d’essai pour la détermination de la résistance à la compression des éprouvettes de matériaux traités aux liants hydrauliques. Le présent document s’applique aux éprouvettes confectionnées en laboratoire ou obtenues à partir de carottes.

Nevezane in hidravlično vezane zmesi - 41. del: Preskusna metoda za ugotavljanje tlačne trdnosti hidravlično vezanih zmesi

Ta dokument opisuje preskusno metodo za ugotavljanje tlačne trdnosti primerkov hidravlično vezanih zmesi. Ta dokument se uporablja za primerke, izdelane v laboratoriju oziroma pripravljene iz izvrtkov.

General Information

Status
Published
Publication Date
02-Nov-2021
Withdrawal Date
30-May-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
03-Nov-2021
Due Date
04-Jul-2022
Completion Date
03-Nov-2021

Relations

Buy Standard

Standard
EN 13286-41:2022
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2022
Nadomešča:
SIST EN 13286-41:2004
Nevezane in hidravlično vezane zmesi - 41. del: Preskusna metoda za ugotavljanje
tlačne trdnosti hidravlično vezanih zmesi
Unbound and hydraulically bound mixtures - Part 41: Test method for the determination
of the compressive strength of hydraulically bound mixtures
Ungebundene und hydraulisch gebundene Gemische - Teil 41: Prüfverfahren zur
Bestimmung der Druckfestigkeit hydraulisch gebundener Gemische
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 41: Méthode
d'essai pour la détermination de la résistance à la compression des mélanges traités aux
liants hydrauliques
Ta slovenski standard je istoveten z: EN 13286-41:2021
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13286-41
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2021
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 13286-41:2003
English Version
Unbound and hydraulically bound mixtures - Part 41: Test
method for the determination of the compressive strength
of hydraulically bound mixtures
Mélanges traités et mélanges non traités aux liants Ungebundene und hydraulisch gebundene Gemische -
hydrauliques - Partie 41: Méthode d'essai pour la Teil 41: Prüfverfahren zur Bestimmung der
détermination de la résistance à la compression des Druckfestigkeit hydraulisch gebundener Gemische
mélanges traités aux liants hydrauliques
This European Standard was approved by CEN on 5 July 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13286-41:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 6
5.1 Compression testing machine . 6
6 Test specimen . 6
7 Test procedure . 6
7.1 Dimensions. 6
7.2 Mass . 6
7.3 Adjustment of the test specimen . 6
7.4 Defective specimens . 6
7.5 Specimen positioning . 7
7.6 Loading . 7
7.7 Assessment of type of failure . 7
8 Expression of result . 8
9 Test report . 8
9.1 Compulsory information . 8
9.2 Optional information . 9

European foreword
This document (EN 13286-41:2021) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2022, and conflicting national standards shall be
withdrawn at the latest by May 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersede EN 13286-41:2003.
The following changes have been made in comparison with EN 13286-41:2003:
— editorial changes;
— to cater for the wide range of strengths possible for hydraulically bound mixtures – from < 1 MPa
to 50 MPa or more - an increase in the permitted ‘time window’ for rupture of the specimen.
This document is one of a series of standards as listed below.
— EN 13286-1, Unbound and hydraulically bound mixtures — Part 1: Test methods for laboratory
reference density and water content — Introduction, general requirements and sampling
— EN 13286-2, Unbound and hydraulically bound mixtures — Part 2: Test methods for laboratory
reference density and water content — Proctor compaction
— EN 13286-3, Unbound and hydraulically bound mixtures — Part 3: Test methods for laboratory
reference density and water content — Vibrocompression with controlled parameters
— EN 13286-4, Unbound and hydraulically bound mixtures — Part 4: Test methods for laboratory
reference density and water content — Vibrating hammer
— EN 13286-5, Unbound and hydraulically bound mixtures — Part 5: Test methods for laboratory
reference density and water content — Vibrating table
— EN 13286-7, Unbound and hydraulically bound mixtures — Part 7: Cyclic load triaxial test for
unbound mixtures
— EN 13286-40, Unbound and hydraulically bound mixtures — Part 40: Test method for the
determination of the direct tensile strength of hydraulically bound mixtures
— EN 13286-41, Unbound and hydraulically bound mixtures — Part 41: Test method for the
determination of the compressive strength of hydraulically bound mixtures
— EN 13286-42, Unbound and hydraulically bound mixtures — Part 42: Test method for the
determination of the indirect tensile strength of hydraulically bound mixtures
— EN 13286-43, Unbound and hydraulically bound mixtures — Part 43: Test method for the
determination of the modulus of elasticity of hydraulically bound mixtures
— EN 13286-44, Unbound and hydraulically bound mixtures — Part 44: Test method for the
determination of the alpha coefficient of vitrified blastfurnace slag
— EN 13286-45, Unbound and hydraulically bound mixtures — Test methods — Part 45: Test method
for the determination of the workability period of hydraulically bound mixtures
— EN 13286-46, Unbound and hydraulically bound mixtures — Part 46: Test method for the
determination of the moisture condition value
— EN 13286-47, Unbound and hydraulically bound mixtures — Part 47: Test methods for the
determination of California bearing ratio, immediate bearing index and linear swelling
— EN 13286-48, Unbound and hydraulically bound mixtures — Part 48: Test method for the
determination of the degree of pulverisation
— EN 13286-49, Unbound and hydraulically bound mixtures — Part 49: Test method for the
determination of the accelerated swelling of soil treated by lime and/or hydraulic binder
— EN 13286-50, Unbound and hydraulically bound mixtures — Part 50: Method for the manufacture
of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table
compaction
— EN 13286-51, Unbound and hydraulically bound mixtures — Part 51: Method for the manufacture
of test specimens of hydraulically bound mixtures using vibrating hammer compaction
— EN 13286-52, Unbound and hydraulically bound mixtures — Part 52: Method for the manufacture
of test specimens of hydraulically bound mixtures using vibrocompression
— EN 13286-53, Unbound and hydraulically bound mixtures — Part 53: Method for the manufacture
of test specimens of hydraulically bound mixtures using axial compression
— CEN/TS 13286-54, Unbound and hydraulically bound mixtures — Part 54: Test method for the
determination of frost susceptibility — Resistance to freezing and thawing of hydraulically bound
mixtures
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
1 Scope
This document describes a test method for the determination of the compressive strength of specimens
of hydraulically bound mixtures. This document applies to specimens manufactured in the laboratory
or prepared from cores.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12390-3:2019, Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 13286-50, Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test
specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
EN 13286-51, Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test
specimens of hydraulically bound mixtures using vibrating hammer compaction
EN 13286-52, Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test
specimens of hydraulically bound mixtures using vibrocompression
EN 13286-53, Unbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test
specimens of hydraulically bound mixtures using axial compression
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
hydraulically bound mixture
mixture that hardens by hydraulic and/or pozzolanic and/or sulfatic and/or carbonatic reaction, which
usually has a workability to suit compaction by rolling and which is generally used in bases, sub-bases
and capping layers
3.2
compressive strength
stress at failure of a specimen when tested in uniaxial unconfined compression
3.3
slenderness ratio
ratio of the length to the diameter of a cylindrical specimen
4 Principle
A specimen is subjected to a compressive force until failure. The maximum load sustained by the
specimen is recorded and the compressive strength is calculated.
5 Apparatus
5.1 Compression testing machine
The precision of the machine and the load indication shall be capable of loading and measurement to
accuracy of ± 1 %.
NOTE 1 Test specimens of hydraulically bound mixtures can be either cylindrical or cubical, with nominal
dimensions as small as 50 mm (diameter) and as large as 300 mm (height), and with ultimate compressive
to normal concrete strengths. Machines
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.