SIST EN 1965-1:2002

Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate

This part of the present European standard describes a method to determine the ability of a liquid adhesive to corrode a copper substrate under heat ageing conditions. Temperatures and ageing periods are chosen to ensure the maximum differentiation between the corrosivity of different adhesives and are not intended to represent any particular service condition.

Strukturklebstoffe - Korrosion - Teil 1: Bestimmung und Klassifikation der Korrosion eines Kupfermaterials

Anwendungsbereich
Dieser Teil der vorliegenden Europäischen Norm beschreibt ein Verfahren zur Bestimmung der Fähig-keit
eines flüssigen Klebstoffes, ein Kupfermaterial unter den Bedingungen einer Wärmealterung zu
korrodieren. Die Temperaturen und die Zeitspannen der Alterung sind so gewählt, dass sichergestellt
wird, dass es möglich ist, bei der Prüfung zwischen der Korrosivität unterschiedlicher Klebstoffe maxi-mal
zu unterscheiden. Es ist nicht beabsichtigt, unterschiedliche Anwendungsbedingungen nachzu-stellen.

Adhésifs structuraux - Corrosion - Partie 1: Détermination et classification de la corrosion d'un substrat en cuivre

Cette partie de la présente Norme européenne décrit une méthode permettant de déterminer l'aptitude d'un adhésif liquide a corroder un substrat en cuivre dans des conditions de vieillissement a la chaleur. Les températures et les périodes de vieillissement sont choisies de façon a optimiser la possibilité qu'offre cet essai a faire la distinction entre la corrosivité de différents adhésifs, et elles ne sont pas envisagées pour modéliser des conditions particulieres de service.

Konstrukcijska lepila - Korozija - 1. del: Ugotavljanje in razvrstitev korozije na bakreni testni podlagi

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2002
• Withdrawal Date: 30-May-2011
• ICS: 77.060 - Corrosion of metals
• ICS: 83.180 - Adhesives
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 30-May-2011
• Due Date: 22-Jun-2011
• Completion Date: 31-May-2011
• Ref Project: EN 1965-1:2001 - Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate

Relations

• Replaced By: SIST EN 1965-1:2011 - Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
• Effective Date: 01-Jul-2011
• Replaced By: SIST EN 1965-1:2011 - Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
• Effective Date: 08-Jun-2022
• Replaces: SIST ENV 1965-1:1998 - Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
• Effective Date: 01-Feb-2002

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1965-1:2002
01-februar-2002
1DGRPHãþD
SIST ENV 1965-1:1998
Konstrukcijska lepila - Korozija - 1. del: Ugotavljanje in razvrstitev korozije na
bakreni testni podlagi
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to
a copper substrate
Strukturklebstoffe - Korrosion - Teil 1: Bestimmung und Klassifikation der Korrosion eines
Kupfermaterials
Adhésifs structuraux - Corrosion - Partie 1: Détermination et classification de la corrosion
d'un substrat en cuivre
Ta slovenski standard je istoveten z: EN 1965-1:2001
ICS:
77.060 Korozija kovin Corrosion of metals
83.180 Lepila Adhesives
SIST EN 1965-1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1965-1:2002

---------------------- Page: 2 ----------------------

SIST EN 1965-1:2002
EUROPEAN STANDARD
EN 1965-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2001
ICS 77.060, 83.180 Supersedes ENV 1965-1:1995
English version
Structural adhesives - Corrosion - Part 1: Determination and
classification of corrosion to a copper substrate
Adhésifs structuraux - Corrosion - Partie 1: Détermination Strukturklebstoffe - Korrosion - Teil 1: Bestimmung und
et classification de la corrosion d'un substrat en cuivre Klassifikation der Korrosion eines Kupfermaterials
This European Standard was approved by CEN on 19 February 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1965-1:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1965-1:2002
Page 2
EN 1965-1:2001
Contents
Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle.4
5 Products and materials.4
6 Procedure .5
7 Discolouration/corrosion.6
8 Report .6

---------------------- Page: 4 ----------------------

SIST EN 1965-1:2002
Page 3
EN 1965-1:2001
Foreword
This European Standard has been prepared by Technical Committee CEN/TC 193 "Adhesives", the secretariat of
which is held by AENOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by October 2001, and conflicting national standards shall be withdrawn at the latest
by October 2001.
This European Standard supersedes ENV 1965-1:1995.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.

---------------------- Page: 5 ----------------------

SIST EN 1965-1:2002
Page 4
EN 1965-1:2001
1 Scope
This part of the present European standard describes a method to determine the ability of a liquid adhesive to
corrode a copper substrate under heat ageing conditions. Temperatures and ageing periods are chos
...