SIST EN 13920-3:2004

Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap

This European Standard specifies characteristics, chemical composition and metal yield of new and old scrap recovered from wire or cable of unalloyed aluminium with a chemical composition not less than 99,5 % aluminium, or of defined aluminium alloys.
Example
New scrap from manufacturing of cables and wires.
Old scrap from used aluminium cables obtained from dismantling of electrical lines.

Aluminium und Aluminiumlegierungen - Schrott - Teil 3: Draht- und Kabelschrott

Dieser Teil dieser Europäischen Norm legt die Anforderungen an die Eigenschaften, chemische Zusammensetzung und Metallausbeute von Neuschrott und Altschrott fest, der aus Drähten und Kabeln aus unlegiertem Aluminium, besteht, deren chemische Zusammensetzung nicht weniger als 99,5 % Aluminium ergibt oder der aus definierten Aluminiumlegierungen besteht.

Aluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 3: Scrap de câble et fils

Cette partie de la présente norme européenne spécifie les caractéristiques, la composition chimique et le rendement en métal des nouveaux et anciens scrap d'aluminium provenant de la récupération de fils ou de câbles d'aluminium non allié dont la composition chimique présente une teneur inférieure a 99,5 % d'aluminium, ou qui sont constitués d'alliages d'aluminium de composition définie.

Aluminij in aluminijeve zlitine – Odpadni aluminij – 3. del: Odpadna žica in kabli

General Information

• Status: Published
• Publication Date: 31-Dec-2003
• ICS: 13.030.50 - Recycling
• ICS: 77.120.10 - Aluminium and aluminium alloys
• Technical Committee: INEK - Nonferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2004
• Due Date: 01-Jan-2004
• Completion Date: 01-Jan-2004
• Ref Project: EN 13920-3:2003 - Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine – Odpadni aluminij – 3. del: Odpadna žica in kabliAluminium und Aluminiumlegierungen - Schrott - Teil 3: Draht- und KabelschrottAluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 3: Scrap de câble et filsAluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys13.030.50RecikliranjeRecyclingICS:Ta slovenski standard je istoveten z:EN 13920-3:2003SIST EN 13920-3:2004en01-januar-2004SIST EN 13920-3:2004SLOVENSKI
STANDARD



SIST EN 13920-3:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13920-3April 2003ICS 13.030.50; 77.120.10English versionAluminium and aluminium alloys - Scrap - Part 3: Wire and cablescrapAluminium et alliages d'aluminium - Scrap (matièrespremières pour recyclage) - Partie 3: Scrap de câble et filsAluminium und Aluminiumlegierungen - Schrott - Teil 3:Draht- und KabelschrottThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13920-3:2003 ESIST EN 13920-3:2004



EN 13920-3:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Ordering information.45Requirements.55.1General.55.2Characteristics.55.3Chemical composition.55.4Metal yield.66Classification procedure, treatment of non-conformities and arbitration.6SIST EN 13920-3:2004



EN 13920-3:2003 (E)3ForewordThis document (EN 13920-3:2003) has been prepared by Technical Committee CEN /TC 132, "Aluminium andaluminium alloys", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2003, and conflicting national standards shall be withdrawn at the latestby October 2003.Within its programme of work, Technical Committee CEN/TC 132 has entrusted CEN/TC132/WG 20 "Scrap" toprepare the following standard.EN 13920 comprises the following parts under the general title "Aluminium and aluminium alloys — Scrap" :¾ Part 1: General requirements, sampling and tests¾ Part 2: Unalloyed aluminium scrap¾ Part 3: Wire and cable scrap¾ Part 4: Scrap consisting of one single wrought alloy¾ Part 5: Scrap consisting of two or more wrought alloys of the same series¾ Part 6: Scrap consisting of two or more wrought alloys¾ Part 7: Scrap consisting of castings¾ Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separationprocesses¾ Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials¾ Part 10: Scrap consisting of used aluminium beverage cans¾
...