SIST EN IEC 62683-2-2:2026
(Main)Low-voltage switchgear and controlgear - Product data and properties for information exchange - Engineering data - Part 2-2: Switchgear and controlgear assembly objects for building information modelling (IEC 62683-2-2:2025)
Low-voltage switchgear and controlgear - Product data and properties for information exchange - Engineering data - Part 2-2: Switchgear and controlgear assembly objects for building information modelling (IEC 62683-2-2:2025)
IEC 62683-2-2:2025 specifies the building information modelling (BIM) with the physical characteristics and technical services of low-voltage switchgear and controlgear assemblies to be used mainly for the construction phase of the building and also for delivering data for operation.
This document covers all types of assemblies covered by the IEC 61439 series which can be installed in a building.
Busbar trunking systems defined by IEC 61439-6 are under consideration for a next edition.
These BIM object models, registered in IEC CDD, are intended to supply the process defined by ISO 16739 series.
This document does not cover:
– the build-in components included within the assembly such as switchgear and controlgear,
– safety related control system of machinery,
– the detailed electrical and mechanical configuration of the assembly
– logistic information.
Niederspannungsschaltgeräte - Produktdaten und -eigenschaften für den Informationsaustausch - Engineering Daten - Teil 2-2: Schaltgerätekombinationen für die Gebäudedatenmodellierung (BIM) (IEC 62683-2-2:2025)
Appareillage à basse tension - Données et propriétés de produits pour l’échange d’informations - Données d'ingénierie - Partie 2-2: Objets d’ensembles d’appareillage pour la modélisation des informations de la construction (IEC 62683-2-2:2025)
IEC 62683-2-2:2025 spécifie la modélisation des informations de la construction (BIM), avec les caractéristiques physiques et les services techniques des ensembles d’appareillage à basse tension à utiliser principalement pour la phase de construction du bâtiment, mais aussi pour la livraison des données pour l’exploitation du bâtiment.
Le présent document englobe tous les types d’ensembles couverts par la série IEC 61439, qui peuvent être installés dans un bâtiment.
Les systèmes de canalisation préfabriquée définis dans l’IEC 61439-6 sont à l’étude pour une prochaine édition.
Ces modèles d’objets BIM, enregistrés dans l’IEC CDD, sont destinés à servir d’intrants au processus défini par la série ISO 16739.
Le présent document ne couvre pas:
– les composants intégrés au sein d’un ensemble, tel que l’appareillage;
– le système de commande de machines qui soit relatif à la sécurité;
– la configuration électrique et mécanique détaillée de l’ensemble;
– les informations logistiques.
Sestavi nizkonapetostnih stikalnih in krmilnih naprav - Podatki o izdelku in njegovih lastnostih za izmenjavo informacij - Tehnični podatki - 2-2. del: Sestavni deli stikalne in krmilne opreme za informacijsko modeliranje stavb (IEC 62683-2-2:2025)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2026
Sestavi nizkonapetostnih stikalnih in krmilnih naprav - Podatki o izdelku in
njegovih lastnostih za izmenjavo informacij - Tehnični podatki - 2-2. del: Sestavni
deli stikalne in krmilne opreme za informacijsko modeliranje stavb (IEC 62683-2-
2:2025)
Low-voltage switchgear and controlgear - Product data and properties for information
exchange - Engineering data - Part 2-2: Switchgear and controlgear assembly objects for
building information modelling (IEC 62683-2-2:2025)
Niederspannungsschaltgeräte - Produktdaten und -eigenschaften für den
Informationsaustausch - Engineering Daten - Teil 2-2: Schaltgerätekombinationen für die
Gebäudedatenmodellierung (BIM) (IEC 62683-2-2:2025)
Appareillage à basse tension - Données et propriétés de produits pour l’échange
d’informations - Données d'ingénierie - Partie 2-2: Objets d’ensembles d’appareillage
pour la modélisation des informations de la construction (IEC 62683-2-2:2025)
Ta slovenski standard je istoveten z: EN IEC 62683-2-2:2025
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62683-2-2
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2025
ICS 29.130.20
English Version
Low-voltage switchgear and controlgear - Product data and
properties for information exchange - Engineering data - Part 2-
2: Switchgear and controlgear assembly objects for building
information modelling
(IEC 62683-2-2:2025)
Appareillage à basse tension - Données et propriétés de Niederspannungsschaltgeräte - Produktdaten und -
produits pour l'échange d'informations - Données eigenschaften für den Informationsaustausch - Engineering
d'ingénierie - Partie 2-2 : Objets d'ensembles d'appareillage Daten - Teil 2-2: Schaltgerätekombinationen für die
pour la modélisation des informations de la construction Gebäudedatenmodellierung (BIM)
(IEC 62683-2-2:2025) (IEC 62683-2-2:2025)
This European Standard was approved by CENELEC on 2025-10-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62683-2-2:2025 E
European foreword
The text of document 121/224/FDIS, future edition 1 of IEC 62683-2-2, prepared by TC 121
"Switchgear and controlgear and their assemblies for low voltage" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62683-2-2:2025.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-10-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-10-31
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62683-2-2:2025 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60529:1989 NOTE Approved as EN 60529:1991 (not modified)
IEC 60947-1 NOTE Approved as EN IEC 60947-1
IEC 61360 (series) NOTE Approved as EN 61360 (series)
IEC 61439-1:2020 NOTE Approved as EN IEC 61439-1:2021 (not modified)
IEC 61439-2:2020 NOTE Approved as EN IEC 61439-2:2021 (not modified)
IEC 61439-6 NOTE Approved as EN 61439-6
ISO 16739 (series) NOTE Approved as EN ISO 16739 (series)
ISO 16739-1 NOTE Approved as EN ISO 16739-1
ISO 16757 (series) NOTE Approved as EN ISO 16757 (series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61360-1 - Standard data element types with EN 61360-1 -
associated classification scheme - Part 1:
Definitions - Principles and methods
IEC 62683-1 - Low-voltage switchgear and controlgear - EN 62683-1 -
Product data and properties for information
exchange - Part 1: Catalogue data
IEC 62683-2-2 ®
Edition 1.0 2025-09
INTERNATIONAL
STANDARD
Low-voltage switchgear and controlgear - Product data and properties for
information exchange - Engineering data -
Part 2-2: Switchgear and controlgear assembly objects for building information
modelling
ICS 29.130.20 ISBN 978-2-8327-0583-4
IEC 62683-2-2:2025-09(en)
IEC 62683-2-2:2025 © IEC 2025
CONTENTS
FOREWORD . 2
INTRODUCTION . 4
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Object models . 8
4.1 Electrical assemblies and their building related aspects . 8
4.2 Object attributes . 8
4.3 Decomposition of the building information models . 8
4.4 Assembly building information model . 11
4.5 Busbar trunking unit building information model . 14
5 Library of properties . 14
6 How to create a BIM object . 26
6.1 General . 26
6.2 Create a new electrical family . 26
6.3 Create a geometry . 27
6.4 Create properties . 27
6.5 Create connectors . 27
Annex A (informative) Typical use case . 28
Bibliography . 29
Figure 1 – BIM and the building lifecycle . 4
Figure 2 – BIM data standard overview . 5
Figure 3 – Drawing of property ACE911 . 23
Figure 4 – Drawing of property ACE912 . 23
Figure 5 – Drawing of property ACE913 . 24
Figure 6 – Drawing of property ACE914 and ACE921 . 24
Figure 7 – Drawing of properties ACE915, ACE916, ACE919 and ACE922 . 24
Figure 8 – Drawing of properties ACE917, ACE918, ACE920 and ACE923 . 25
Figure 9 – Drawing of properties ACE890, ACE891, ACE892, ACE895, ACE896 and
ACE898 . 25
Figure 10 – Example of creation of properties. 27
Figure A.1 – Typical use case . 28
Table 1 – Building information models . 9
Table 2 – Assembly building information model . 11
Table 3 – Library of properties created or modified for the BIM classes . 15
Table 4 – Value lists of properties . 25
IEC 62683-2-2:2025 © IEC 2025
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Low-voltage switchgear and controlgear –
Product data and properties for information exchange - Engineering data -
Part 2-2: Switchgear and controlgear assembly objects
for building information modelling
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.