SIST EN ISO 10360-3:2000

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Will be submitted to a parallel enquiry under VA/5.1 on document ISO/DIS ++ 10360-3 (2nd DIS vote (5 month vote) for ISO and 1st enquiry for CEN) ++ (futher to phone call from Safoura - NT/1998-05-04).

Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 3: KMG mit der Achse eines Drehtisches als vierte Achse (ISO 10360-3:2000)

Dieser Teil von ISO 10360 legt die Annahmeprüfung zur Bestätigung der vom Hersteller genannten Leistung eines Vier-Achsen-Koordinatenmessgerätes (KMG) fest. Sie legt auch die Bestätigungsprüfung fest, die es dem Anwender ermöglicht, die Vier-Achsen-Leistung des KMG regelmäßig zu bestätigen. Die in diesem Teil von ISO 10360 beschriebene Annahmeprüfung und Bestätigungsprüfung sind nur anwendbar für Vier-Achsen-Geräte mit drei Achsen für die Messung der Werkstückkoordinaten und einem Drehtisch für die Anordnung des Werkstückes.

Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines a mesurer tridimensionnelles (MMT) - Partie 3: MMT ayant l'axe de rotation d'un plateau tournant comme quatrieme axe (ISO 10360-3:2000)

La présente partie de l'ISO 10360 spécifie l'essai de réception qui vérifie que les performances des machines à mesurer tridimensionnelles (MMT) à quatre axes sont conformes à ce qui est spécifié par le fabricant. Elle spécifie aussi l'essai de vérification périodique qui permet à l'utilisateur de vérifier périodiquement les performances d'une MMT à quatre axes.L'essai de réception et l'essai de vérification périodique décrits dans la présente partie de l'ISO 10360 s'appliquent uniquement aux machines à quatre axes, ayant trois axes pour mesurer les coordonnées de la pièce et un plateau tournant pour l'orientation de la pièce.

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)

General Information

• Status: Published
• Publication Date: 30-Nov-2000
• ICS: 17.040.30 - Measuring instruments
• ICS: 17.040.40 - Geometrical Product Specification (GPS)
• Technical Committee: SS SPL - Technical Board for the general field
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2000
• Due Date: 01-Dec-2000
• Completion Date: 01-Dec-2000
• Ref Project: EN ISO 10360-3:2000 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 3: KMG mit der Achse eines Drehtisches als vierte Achse (ISO 10360-3:2000)Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines a mesurer tridimensionnelles (MMT) - Partie 3: MMT ayant l'axe de rotation d'un plateau tournant comme quatrieme axe (ISO 10360-3:2000)Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)17.040.40Geometrical Product Specification (GPS)17.040.30MerilaMeasuring instrumentsICS:Ta slovenski standard je istoveten z:EN ISO 10360-3:2000SIST EN ISO 10360-3:2000en01-december-2000SIST EN ISO 10360-3:2000SLOVENSKI
STANDARD



SIST EN ISO 10360-3:2000



SIST EN ISO 10360-3:2000



SIST EN ISO 10360-3:2000



SIST EN ISO 10360-3:2000



SIST EN ISO 10360-3:2000



ReferencenumberISO10360-3:2000(E)©ISO2000INTERNATIONALSTANDARDISO10360-3Firstedition2000-03-15GeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM)—Part3:CMMswiththeaxisofarotarytableasthefourthaxisSpécificationgéométriquedesproduits(GPS)—Essaisderéceptionetdevérificationpériodiquedesmachinesàmesurertridimensionnelles(MTT)—Partie3:MMTayantl'axederotationd'unplateautournantcommequatrièmeaxeSIST EN ISO 10360-3:2000



ISO10360-3:2000(E)PDFdisclaimerThisPDFfilemaycontainembeddedtypefaces.InaccordancewithAdobe'slicensingpolicy,thisfilemaybeprintedorviewedbutshallnotbeeditedunlessthetypefaceswhichareembeddedarelicensedtoandinstalledonthecomputerperformingtheediting.Indownloadingthisfile,partiesacceptthereintheresponsibilityofnotinfringingAdobe'slicensingpolicy.TheISOCentralSecretariatacceptsnoliabilityinthisarea.AdobeisatrademarkofAdobeSystemsIncorporated.DetailsofthesoftwareproductsusedtocreatethisPDFfilecanbefoundintheGeneralInforelativetothefile;thePDF-creationparameterswereoptimizedforprinting.EverycarehasbeentakentoensurethatthefileissuitableforusebyISOmemberbodies.Intheunlikelyeventthataproblemrelatingtoitisfound,pleaseinformtheCentralSecretariatattheaddressgivenbelow.©ISO2000Allrightsreserved.Unlessotherwisespecified,nopartofthispublicationmaybereproducedorutilizedinanyformorbyanymeans,electronicormechanical,includingphotocopyingandmicrofilm,withoutpermissioninwritingfromeitherISOattheaddressbeloworISO'smemberbodyinthecountryoftherequester.ISOcopyrightofficeCasepostal[e-mail]©ISO2000–AllrightsreservedSIST EN ISO 10360-3:2000



ISO10360-3:2000(E)©ISO2000–AllrightsreservediiiContentsPageForeword.ivIntroduction.v1Scope.12Normativereferences.13Termsanddefinitions.14Requirementsformetrologicalcharacteristics.24.1Errorofindication.24.2Environmentalconditions.24.3Rotarytable.24.4Stylussystem.24.5Operatingconditions.25Acceptancetestandreverificationtest.35.1Principles.35.2Measuringequipment.35.3Procedure.35.4Obtentionoftestresults.56Compliancewithspecifications.86.1Acceptancetest.86.2Reverificationtest.87Applications.87.1Acceptancetest.87.2Reverificationtest.87.3Interimcheck.8AnnexA(informative)Interimcheck.9AnnexB(informative)RelationtotheGPSmatrixmodel.10Bibliography.12SIST EN ISO 10360-3:2000



ISO10360-3:2000(E)iv©ISO2000–AllrightsreservedForewordISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISOmemberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnicalcommittees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhastherighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,inliaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnicalCommission(IEC)onallmattersofelectrotechnicalstandardization.InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3.DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothememberbodiesforvoting.PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote.AttentionisdrawntothepossibilitythatsomeoftheelementsofthispartofISO10360maybethesubjectofpatentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights.InternationalStandardISO10360-3waspreparedbyTechnicalCommitteeISO/TC213,Dimensionalandgeometricalproductspecificationsandverification.ISO10360consistsofthefollowingparts,underthegeneraltitleGeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM):Part1:VocabularyPart2:CMMsusedformeasuringlineardimensionsPart3:CMMswiththeaxisofarotarytableasthefourthaxisPart4:CMMsusedinscanningmeasuringmodePart5:CMMsusingmultiplestylusprobingsystemsPart6:EstimationoferrorsincomputingGaussianassociatedfeaturesAnnexesAandBofthispartofISO10360areforinformationonly.SIST EN ISO 10360-3:2000



ISO10360-3:2000(E)©ISO2000–AllrightsreservedvIntroductionThispartofISO10360isageometricalproductspecification(GPS)standardandistoberegardedasageneralGPSstandard(seeISO/TR14638).Itinfluenceslink5ofthechainsofstandardsonsize,distance,radius,angle,form,orientation,location,run-outanddatums.FormoredetailedinformationontherelationshipofthispartofISO13060tootherstandardsandtheGPSmatrixmodel,seeannexB.TheacceptancetestandreverificationtestofthispartofISO10360areapplicabletoCMMswhichusearotarytablefortheorientationofaworkpiecebeingmeasured.ThetestsspecifiedinthispartofISO10360areperformedinadditiontothesizemeasuringtestsaccordingtoISO10360-2,whichareconductedwiththerotarytablestationary.Theyaredesignedtodetectthesystemmeasuringerrorsrelativetoanaxissystemfixedtotherotarytable.Itisnormallynotusefultoisolatetherotarytableerrorsfromothersourcesofmachineerror.SIST EN ISO 10360-3:2000



SIST EN ISO 10360-3:2000



INTERNATIONALSTANDARDISO10360-3:2000(E)©ISO2000–Allrightsreserved1GeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM)—Part3:CMMswiththeaxisofarotarytableasthefourthaxis1ScopeThispartofISO10360specifiestheacceptancetestwhichverifiesthattheperformanceoffour-axiscoordinatemeasuringmachines(CMM)isinaccordancewiththatstatedbythemanufacturer.Italsospecifiesthereverificationtest,whichenablestheusertoreverifytheperformanceofafour-axisCMMperiodically.TheacceptancetestandreverificationtestdescribedinthispartofISO10360areapplicableonlytofour-axismachineswiththreeaxesformeasuringworkpiececoordinates,plusarotarytablefororientingtheworkpiece.2NormativereferencesThefollowingnormativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthispartofISO10360.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthesepublicationsdonotapply.However,partiestoagreementsbasedonthispartofISO10360areencouragedtoinvestigatethepossibilityofapplyingthemostrecenteditionsofthenormativedocumentsindicatedbelow.Forundatedreferences,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIECmaintainregistersofcurrentlyvalidInternationalStandards.ISO10360-1:—1),GeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM)—Part1:Vocabulary.ISO14253-1:1998,GeometricalProductSpecifications(GPS)—Inspectionbymeasurementofworkpiecesandmeasuringequipment—Part1:Decisionrulesforprovingconformanceornon-conformancewithspecifications.InternationalVocabularyofBasicandGeneralTermsinMetrology(VIM).BIPM,IEC,IFCC,ISO,IUPAC,IUPAP,OIML,2ndedition,1993.3TermsanddefinitionsForthepurposesofthispartofISO10360,thetermsanddefinitionsgiveninISO10360-1,ISO14253-1andVIMapply.1)Tobepublished.SIST EN ISO 10360-3:2000



ISO10360-3:2000(E)2©ISO2000–Allrightsreserved4Requirementsformetrologicalcharacteristics4.1ErrorofindicationTheerrorsofindication,FR,FT,FA,asdefinedinISO10360-1,forthethreefour-axiserrorsshallnotexceedthemaximumpermissibleerrors,MPEFR,MPEFT,MPEFA,asdefinedinISO10360-1,asstatedby:themanufacturer,incaseofacceptancetests;theuser,incaseofreverificationtests.Theerrorsofindication(FR,FT,FA)andthemaximumpermissibleerrors(MPEFR,MPEFT,MPEFA)areexpressedinmicrometres.4.2EnvironmentalconditionsLimitstoberespectedforpermissibleenvironmentalconditionssuchastemperatureconditions,airhumidityandvibrationatthesiteofinstallationthatinfluencethemeasurementsshallbespecifiedby:themanufacturer,incaseofacceptancetests;theuser,incaseofreverificationtests.Inbothcases,theuserisfreetochoosetheconditionswithinthespecifiedlimits.4.3RotarytableThemaximumpermissibleerrors(MPEFR,MPEFT,MPEFA)applyforanypermittedloading,locationandorientationoftherotarytableontheCMMandforanylocationsofthetestspheresontherotar
...