EN ISO 10360-3:2000

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Will be submitted to a parallel enquiry under VA/5.1 on document ISO/DIS ++ 10360-3 (2nd DIS vote (5 month vote) for ISO and 1st enquiry for CEN) ++ (futher to phone call from Safoura - NT/1998-05-04).

Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 3: KMG mit der Achse eines Drehtisches als vierte Achse (ISO 10360-3:2000)

Dieser Teil von ISO 10360 legt die Annahmeprüfung zur Bestätigung der vom Hersteller genannten Leistung eines Vier-Achsen-Koordinatenmessgerätes (KMG) fest. Sie legt auch die Bestätigungsprüfung fest, die es dem Anwender ermöglicht, die Vier-Achsen-Leistung des KMG regelmäßig zu bestätigen. Die in diesem Teil von ISO 10360 beschriebene Annahmeprüfung und Bestätigungsprüfung sind nur anwendbar für Vier-Achsen-Geräte mit drei Achsen für die Messung der Werkstückkoordinaten und einem Drehtisch für die Anordnung des Werkstückes.

Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 3: MMT ayant l'axe de rotation d'un plateau tournant comme quatrième axe (ISO 10360-3:2000)

La présente partie de l'ISO 10360 spécifie l'essai de réception qui vérifie que les performances des machines à mesurer tridimensionnelles (MMT) à quatre axes sont conformes à ce qui est spécifié par le fabricant. Elle spécifie aussi l'essai de vérification périodique qui permet à l'utilisateur de vérifier périodiquement les performances d'une MMT à quatre axes.L'essai de réception et l'essai de vérification périodique décrits dans la présente partie de l'ISO 10360 s'appliquent uniquement aux machines à quatre axes, ayant trois axes pour mesurer les coordonnées de la pièce et un plateau tournant pour l'orientation de la pièce.

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)

General Information

• Status: Published
• Publication Date: 14-Mar-2000
• ICS: 17.040.30 - Measuring instruments
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 10-Jul-2008
• Completion Date: 10-Jul-2008
• Ref Project: SIST EN ISO 10360-3:2000 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)

Overview

EN ISO 10360-3:2000 is part of the ISO 10360 series of Geometrical Product Specification (GPS) standards that define acceptance and reverification tests for coordinate measuring machines (CMM). Part 3 specifically applies to four‑axis CMMs that use a rotary table as the fourth axis. The standard specifies test principles and procedures to verify that a machine’s performance for rotary‑table measurement is within the declared maximum permissible errors (MPEs).

Key topics and requirements

• Scope and purpose
  • Acceptance tests (manufacturer) and reverification tests (user) for four‑axis CMMs with a rotary table.
  • Tests supplement the size‑measuring tests of ISO 10360‑2 and are aimed at errors introduced by rotary table motion.
• Metrological characteristics
  • Defines the error of indication components for four‑axis systems: radial (FR), tangential (FT) and axial (FA).
  • MPE values for FR, FT, FA are expressed in micrometres and are stated by the manufacturer (acceptance) or chosen by the user (reverification).
• Environmental and operating conditions
  • Limits for temperature, humidity and vibration must be respected as specified by manufacturer/user.
  • Procedures require adherence to machine warm‑up, stylus configuration, cleaning, probing qualification and rotary‑table set‑up.
• Test equipment and procedure
  • Two calibrated test spheres (10–30 mm diameter; form calibrated) are mounted on the rotary table at defined radius (r) and height (h).
  • Series of measurements are taken with the table rotated through multiple angular positions (recommended to cover at least 720°) to determine centre coordinates.
  • FR, FT and FA are calculated as the peak‑to‑peak variation of the sphere centre coordinates in the radial, tangential and axial directions.

Applications and users

• Practical uses:
  • Acceptance testing of new four‑axis CMMs prior to installation.
  • Periodic reverification for quality assurance and traceability in production metrology.
  • Comparative evaluation when matching CMM capability to large workpiece tolerances or when extending measuring volume via a rotary table.
• Typical users:
  • CMM manufacturers and commissioning teams
  • Metrology laboratories and quality engineers
  • Aerospace, automotive and precision manufacturing sectors that use four‑axis measurement

Related standards

• ISO 10360-1 (vocabulary)
• ISO 10360-2 (CMMs for linear dimension tests)
• ISO 10360 (series) - other parts for scanning, multi‑stylus probings, etc.
• ISO 14253-1 and the VIM (metrology vocabulary) referenced for decision rules and terms

Keywords: EN ISO 10360-3:2000, GPS standard, coordinate measuring machines, CMM acceptance test, four‑axis CMM, rotary table, MPE, error of indication, test spheres, CMM reverification.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 3: KMG mit der Achse eines Drehtisches als vierte Achse (ISO 10360-3:2000)Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines a mesurer tridimensionnelles (MMT) - Partie 3: MMT ayant l'axe de rotation d'un plateau tournant comme quatrieme axe (ISO 10360-3:2000)Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)17.040.40Geometrical Product Specification (GPS)17.040.30MerilaMeasuring instrumentsICS:Ta slovenski standard je istoveten z:EN ISO 10360-3:2000SIST EN ISO 10360-3:2000en01-december-2000SIST EN ISO 10360-3:2000SLOVENSKI
STANDARD
ReferencenumberISO10360-3:2000(E)©ISO2000INTERNATIONALSTANDARDISO10360-3Firstedition2000-03-15GeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM)—Part3:CMMswiththeaxisofarotarytableasthefourthaxisSpécificationgéométriquedesproduits(GPS)—Essaisderéceptionetdevérificationpériodiquedesmachinesàmesurertridimensionnelles(MTT)—Partie3:MMTayantl'axederotationd'unplateautournantcommequatrièmeaxeSIST EN ISO 10360-3:2000

ISO10360-3:2000(E)PDFdisclaimerThisPDFfilemaycontainembeddedtypefaces.InaccordancewithAdobe'slicensingpolicy,thisfilemaybeprintedorviewedbutshallnotbeeditedunlessthetypefaceswhichareembeddedarelicensedtoandinstalledonthecomputerperformingtheediting.Indownloadingthisfile,partiesacceptthereintheresponsibilityofnotinfringingAdobe'slicensingpolicy.TheISOCentralSecretariatacceptsnoliabilityinthisarea.AdobeisatrademarkofAdobeSystemsIncorporated.DetailsofthesoftwareproductsusedtocreatethisPDFfilecanbefoundintheGeneralInforelativetothefile;thePDF-creationparameterswereoptimizedforprinting.EverycarehasbeentakentoensurethatthefileissuitableforusebyISOmemberbodies.Intheunlikelyeventthataproblemrelatingtoitisfound,pleaseinformtheCentralSecretariatattheaddressgivenbelow.©ISO2000Allrightsreserved.Unlessotherwisespecified,nopartofthispublicationmaybereproducedorutilizedinanyformorbyanymeans,electronicormechanical,includingphotocopyingandmicrofilm,withoutpermissioninwritingfromeitherISOattheaddressbeloworISO'smemberbodyinthecountryoftherequester.ISOcopyrightofficeCasepostal[e-mail]©ISO2000–AllrightsreservedSIST EN ISO 10360-3:2000

ISO10360-3:2000(E)©ISO2000–AllrightsreservediiiContentsPageForeword.ivIntroduction.v1Scope.12Normativereferences.13Termsanddefinitions.14Requirementsformetrologicalcharacteristics.24.1Errorofindication.24.2Environmentalconditions.24.3Rotarytable.24.4Stylussystem.24.5Operatingconditions.25Acceptancetestandreverificationtest.35.1Principles.35.2Measuringequipment.35.3Procedure.35.4Obtentionoftestresults.56Compliancewithspecifications.86.1Acceptancetest.86.2Reverificationtest.87Applications.87.1Acceptancetest.87.2Reverificationtest.87.3Interimcheck.8AnnexA(informative)Interimcheck.9AnnexB(informative)RelationtotheGPSmatrixmodel.10Bibliography.12SIST EN ISO 10360-3:2000

ISO10360-3:2000(E)iv©ISO2000–AllrightsreservedForewordISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISOmemberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnicalcommittees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhastherighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,inliaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnicalCommission(IEC)onallmattersofelectrotechnicalstandardization.InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3.DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothememberbodiesforvoting.PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote.AttentionisdrawntothepossibilitythatsomeoftheelementsofthispartofISO10360maybethesubjectofpatentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights.InternationalStandardISO10360-3waspreparedbyTechnicalCommitteeISO/TC213,Dimensionalandgeometricalproductspecificationsandverification.ISO10360consistsofthefollowingparts,underthegeneraltitleGeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM):Part1:VocabularyPart2:CMMsusedformeasuringlineardimensionsPart3:CMMswiththeaxisofarotarytableasthefourthaxisPart4:CMMsusedinscanningmeasuringmodePart5:CMMsusingmultiplestylusprobingsystemsPart6:EstimationoferrorsincomputingGaussianassociatedfeaturesAnnexesAandBofthispartofISO10360areforinformationonly.SIST EN ISO 10360-3:2000

ISO10360-3:2000(E)©ISO2000–AllrightsreservedvIntroductionThispartofISO10360isageometricalproductspecification(GPS)standardandistoberegardedasageneralGPSstandard(seeISO/TR14638).Itinfluenceslink5ofthechainsofstandardsonsize,distance,radius,angle,form,orientation,location,run-outanddatums.FormoredetailedinformationontherelationshipofthispartofISO13060tootherstandardsandtheGPSmatrixmodel,seeannexB.TheacceptancetestandreverificationtestofthispartofISO10360areapplicabletoCMMswhichusearotarytablefortheorientationofaworkpiecebeingmeasured.ThetestsspecifiedinthispartofISO10360areperformedinadditiontothesizemeasuringtestsaccordingtoISO10360-2,whichareconductedwiththerotarytablestationary.Theyaredesignedtodetectthesystemmeasuringerrorsrelativetoanaxissystemfixedtotherotarytable.Itisnormallynotusefultoisolatetherotarytableerrorsfromothersourcesofmachineerror.SIST EN ISO 10360-3:2000

INTERNATIONALSTANDARDISO10360-3:2000(E)©ISO2000–Allrightsreserved1GeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM)—Part3:CMMswiththeaxisofarotarytableasthefourthaxis1ScopeThispartofISO10360specifiestheacceptancetestwhichverifiesthattheperformanceoffour-axiscoordinatemeasuringmachines(CMM)isinaccordancewiththatstatedbythemanufacturer.Italsospecifiesthereverificationtest,whichenablestheusertoreverifytheperformanceofafour-axisCMMperiodically.TheacceptancetestandreverificationtestdescribedinthispartofISO10360areapplicableonlytofour-axismachineswiththreeaxesformeasuringworkpiececoordinates,plusarotarytablefororientingtheworkpiece.2NormativereferencesThefollowingnormativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthispartofISO10360.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthesepublicationsdonotapply.However,partiestoagreementsbasedonthispartofISO10360areencouragedtoinvestigatethepossibilityofapplyingthemostrecenteditionsofthenormativedocumentsindicatedbelow.Forundatedreferences,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIECmaintainregistersofcurrentlyvalidInternationalStandards.ISO10360-1:—1),GeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM)—Part1:Vocabulary.ISO14253-1:1998,GeometricalProductSpecifications(GPS)—Inspectionbymeasurementofworkpiecesandmeasuringequipment—Part1:Decisionrulesforprovingconformanceornon-conformancewithspecifications.InternationalVocabularyofBasicandGeneralTermsinMetrology(VIM).BIPM,IEC,IFCC,ISO,IUPAC,IUPAP,OIML,2ndedition,1993.3TermsanddefinitionsForthepurposesofthispartofISO10360,thetermsanddefinitionsgiveninISO10360-1,ISO14253-1andVIMapply.1)Tobepublished.SIST EN ISO 10360-3:2000

ISO10360-3:2000(E)2©ISO2000–Allrightsreserved4Requirementsformetrologicalcharacteristics4.1ErrorofindicationTheerrorsofindication,FR,FT,FA,asdefinedinISO10360-1,forthethreefour-axiserrorsshallnotexceedthemaximumpermissibleerrors,MPEFR,MPEFT,MPEFA,asdefinedinISO10360-1,asstatedby:themanufacturer,incaseofacceptancetests;theuser,incaseofreverificationtests.Theerrorsofindication(FR,FT,FA)andthemaximumpermissibleerrors(MPEFR,MPEFT,MPEFA)areexpressedinmicrometres.4.2EnvironmentalconditionsLimitstoberespectedforpermissibleenvironmentalconditionssuchastemperatureconditions,airhumidityandvibrationatthesiteofinstallationthatinfluencethemeasurementsshallbespecifiedby:themanufacturer,incaseofacceptancetests;theuser,incaseofreverificationtests.Inbothcases,theuserisfreetochoosetheconditionswithinthespecifiedlimits.4.3RotarytableThemaximumpermissibleerrors(MPEFR,MPEFT,MPEFA)applyforanypermittedloading,locationandorientationoftherotarytableontheCMMandforanylocationsofthetestspheresontherotar
...