SIST EN IEC 61249-6-3:2024
(Main)Materials for printed boards and other interconnecting structures - Part 6-3: Sectional specification set for reinforcement materials - Specification for finished fabric woven from “E” glass for printed boards
Materials for printed boards and other interconnecting structures - Part 6-3: Sectional specification set for reinforcement materials - Specification for finished fabric woven from “E” glass for printed boards
This International Standard covers finished fabrics woven from ‘‘E’’ glass electrical grade glass fibre yarns that are intended as a reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by this specification are plain weave.
This specification determines the nomenclature, definitions, general and chemical requirements for the glass, and physical requirements for finished woven glass fibre fabrics.
Annex A of this standard provides a style designator for each finished fabric glass style, with specifications on yarn, fabric count, thickness and weight in both SI and US system.
Materialien für Leiterplatten und andere Verbindungsstrukturen – Teil 6-3: Rahmenspezifikationen für Verstärkungsmaterialien – Spezifikation für mit Haftvermittler ausgerüstete Gewebe aus E-Glasfaser-Garnen für Leiterplatten
Matériaux pour circuits imprimés et autres structures d’interconnexion - Partie 6-3 : Ensemble de spécifications intermédiaires pour matériaux de renfort - Spécification des tissus finis en verre "E" pour circuits imprimés
L'IEC 61249-6-3:2023 couvre les tissus finis fabriqués à partir de fils de fibre de verre de qualité électrique (verre "E"), qui sont destinés à servir de matériau de renfort dans les plastiques stratifiés à usage électrique et électronique. Tous les tissus couverts par cette spécification sont en armure toile.
Cette spécification détermine la nomenclature, les définitions, les exigences générales et chimiques relatives au verre, ainsi que les exigences physiques des tissus finis en fibre de verre.
L’Annex A du présent document fournit un identifiant pour chaque modèle de verre pour tissu fini, ainsi que les spécifications de fil, de contexture de tissu, d’épaisseur et de poids dans les deux systèmes de mesure, le Système international (SI) et les unités de mesure américaines (système US).
Cette première édition annule et remplace l’IEC/PAS 61249-6-3 parue en 2011. Cette édition constitue une révision technique.
Materiali za plošče tiskanih vezij in druge povezovalne strukture - 6-3. del: Nabor oddelčnih specifikacij za armaturne materiale - Specifikacija za apretirane tkanine, tkane s steklenimi vlakni "E" za tiskana vezja
Ta mednarodni standard zajema apretirane tkanine, tkane s prejo iz steklenih vlaken električnega razreda »E«, ki so predvidene kot armaturni material v izdelkih iz laminirane plastike za električno in elektronsko uporabo. Vse tkanine, zajete v tej specifikaciji, so tkane s platno vezavo.
Ta specifikacija določa nomenklaturo, definicije, splošne in kemijske zahteve za steklo ter fizične zahteve za apretirane tkanine, tkane s steklenimi vlakni.
V dodatku A tega standarda so podane oznake za posamezne vrste apretiranih steklenih tkanin ter specifikacije v zvezi s prejo, številom vlaken, debelino in težo tako v mednarodnem sistemu enot (SI) kot ameriškem sistemu enot (US).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61249-6-3:2024
01-januar-2024
Materiali za plošče tiskanih vezij in druge povezovalne strukture - 6-3. del: Nabor
oddelčnih specifikacij za armaturne materiale - Specifikacija za apretirane tkanine,
tkane s steklenimi vlakni "E" za tiskana vezja
Materials for printed boards and other interconnecting structures - Part 6-3: Sectional
specification set for reinforcement materials - Specification for finished fabric woven from
“E” glass for printed boards
Materialien für Leiterplatten und andere Verbindungsstrukturen – Teil 6-3:
Rahmenspezifikationen für Verstärkungsmaterialien – Spezifikation für mit Haftvermittler
ausgerüstete Gewebe aus E-Glasfaser-Garnen für Leiterplatten
Matériaux pour circuits imprimés et autres structures d’interconnexion - Partie 6-3 :
Ensemble de spécifications intermédiaires pour matériaux de renfort - Spécification des
tissus finis en verre "E" pour circuits imprimés
Ta slovenski standard je istoveten z: EN IEC 61249-6-3:2023
ICS:
31.180 Tiskana vezja (TIV) in tiskane Printed circuits and boards
plošče
SIST EN IEC 61249-6-3:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61249-6-3:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 61249-6-3:2024
EUROPEAN STANDARD EN IEC 61249-6-3
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2023
ICS 31.180
English Version
Materials for printed boards and other interconnecting structures
- Part 6-3: Sectional specification set for reinforcement materials
- Specification for finished fabric woven from "E" glass for printed
boards
(IEC 61249-6-3:2023)
Matériaux pour circuits imprimés et autres structures Materialien für Leiterplatten und andere
d'interconnexion - Partie 6-3 : Ensemble de spécifications Verbindungsstrukturen - Teil 6-3: Rahmenspezifikationen
intermédiaires pour matériaux de renfort - Spécification des für Verstärkungsmaterialien - Spezifikation für mit
tissus finis en verre "E" pour circuits imprimés Haftvermittler ausgerüstete Gewebe aus E-Glasfaser-
(IEC 61249-6-3:2023) Garnen für Leiterplatten
(IEC 61249-6-3:2023)
This European Standard was approved by CENELEC on 2023-07-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61249-6-3:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61249-6-3:2024
EN IEC 61249-6-3:2023 (E)
European foreword
The text of document 91/1680/CDV, future edition 1 of IEC 61249-6-3, prepared by IEC/TC 91
"Electronics assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 61249-6-3:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-04-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-07-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61249-6-3:2023 was approved by CENELEC as a
European Standard without any modificati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.