Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)

This International Standard specifies the requirements for rubber hoses for wet and dry sand and grit blasting, suitable for use up to a maximum working pressure of 6,3 bar and over an operating temperature range of -25 °C to +70 °C.

Gummischläuche zum Sandstrahlen - Anforderungen (ISO 3861:2005)

Diese Internationale Norm legt die Anforderungen an Gummischläuche zum Strahlen mit trockenem und nassem Sand und Kies fest, die für die Verwendung bis zu einem maximalen Betriebsdruck von 6,3 bar und einem Betriebs¬temperatur¬bereich von 25 °C bis 70 °C geeignet sind.

Tuyaux en caoutchouc pour sablage et grenaillage - Spécifications (ISO 3861:2005)

L'ISO 3861:2005 spécifie les exigences pour les tuyaux en caoutchouc destinés au sablage, sec et humide, et au grenaillage, pouvant être utilisés jusqu'à une pression maximale de service de 6,3 bar et à des températures de service comprises entre -25 °C et +70 °C.

Gumene cevi za peskanje - Specifikacija (ISO 3861:2005)

General Information

Status
Withdrawn
Publication Date
05-Mar-2009
Withdrawal Date
10-Feb-2021
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Feb-2021
Due Date
06-Mar-2021
Completion Date
11-Feb-2021

RELATIONS

Buy Standard

Standard
SIST EN ISO 3861:2009
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 3861:2009
01-maj-2009
1DGRPHãþD
SIST EN ISO 3861:2000
Gumene cevi za peskanje - Specifikacija (ISO 3861:2005)
Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)

Tuyaux en caoutchouc pour sablage et grenaillage - Spécifications (ISO 3861:2005)

Ta slovenski standard je istoveten z: EN ISO 3861:2008
ICS:
83.140.40 Gumene cevi Hoses
SIST EN ISO 3861:2009 en,fr

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 3861:2009
---------------------- Page: 2 ----------------------
SIST EN ISO 3861:2009
EUROPEAN STANDARD
EN ISO 3861
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2008
ICS 25.220.10; 83.140.40 Supersedes EN ISO 3861:1997
English Version
Rubber hoses for sand and grit blasting - Specification (ISO
3861:2005)
Tuyaux en caoutchouc pour sablage et grenaillage -
Spécifications (ISO 3861:2005)
This European Standard was approved by CEN on 29 October 2008.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the

official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3861:2008: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3861:2009
EN ISO 3861:2008 (E)
Contents Page

Foreword..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 3861:2009
EN ISO 3861:2008 (E)
Foreword

The text of ISO 3861:2005 has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber

products” of the International Organization for Standardization (ISO) and has been taken over as EN ISO

3861:2008 by Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies” the

secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the

latest by May 2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 3861:1997.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.
Endorsement notice

The text of ISO 3861:2005 has been approved by CEN as a EN ISO 3861:2008 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 3861:2009
---------------------- Page: 6 ----------------------
SIST EN ISO 3861:2009
INTERNATIONAL ISO
STANDARD 3861
Third edition
2005-02-15
Rubber hoses for sand and grit
blasting — Specification
Tuyaux en caoutchouc pour sablage et grenaillage — Spécifications
Reference number
ISO 3861:2005(E)
ISO 2005
---------------------- Page: 7 ----------------------
SIST EN ISO 3861:2009
ISO 3861:2005(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2005

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 3861:2009
ISO 3861:2005(E)
Contents Page

Foreword............................................................................................................................................................ iv

1 Scope...................................................................................................................................................... 1

2 Normative references ........................................................................................................................... 1

3 Terms and definitions........................................................................................................................... 1

4 Classification......................................................................................................................................... 2

5 Materials and construction .................................................................................................................. 2

6 Dimensions............................................................................................................................................ 2

6.1 Internal diameters and tolerances....................................................................................................... 2

6.2 Concentricity ......................................................................................................................................... 3

6.3 Tolerance on length .............................................................................................................................. 3

6.4 Minimum thickness of lining and cover.............................................................................................. 3

7 Physical properties ............................................................................................................................... 3

7.1 Rubber compounds .............................................................................................................................. 3

7.2 Finished hoses ...................................................................................................................................... 3

8 Marking................................................................................................................................................... 4

© ISO 2005 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 38
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.