Controlgear for electric light sources - Safety - Part 2-12: Particular requirements - DC or AC supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-12:2024)

IEC 61347-2-12:2024 is available as IEC 61347-2-12:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61347-2-12:2024 specifies safety requirements for electronic controlgear for use on AC supplies at 50 Hz or 60 Hz up to 1 000 V or DC supplies up to 1 000 V. The type of controlgear is a convertor that can contain igniting and stabilizing elements for operation of a discharge lamp under direct current or at a frequency that can deviate from the supply frequency.
This second edition cancels and replaces the first edition published in 2005 and Amendment 1:2010. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) introduction of dated references where appropriate;
b) clarification of sample item numbers;
c) addition of new information requirements (items v), w) and x) of IEC 61347-1:2015, 7.1 and IEC 61347-1:2015/AMD1:2017, 7.1).

Betriebsgeräte für elektrische Lichtquellen - Sicherheit - Teil 2-12: Besondere Anforderungen - gleich- oder wechselstromversorgte elektronische Vorschaltgeräte für Entladungslampen (ausgenommen Leuchtstofflampen) (IEC 61347-2-12:2024)

Appareillages de commande pour les sources de lumière électriques - Sécurité - Partie 2-12: Exigences particulières - Appareillages électroniques alimentés en courant continu ou alternatif pour lampes à décharge (à l'exclusion des lampes fluorescentes) (IEC 61347-2-12:2024)

IEC 61347-2-12:2024 est disponible sous forme de IEC 61347-2-12:2024 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L'IEC 61347-2-12:2024 spécifie les exigences de sécurité des appareillages électroniques destinés à être utilisés avec des alimentations jusqu'à 1 000 V en courant alternatif à 50 Hz ou 60 Hz ou avec des alimentations jusqu'à 1 000 V en courant continu. Le type d'appareillage est un convertisseur qui peut contenir des éléments d'amorçage et de stabilisation pour le fonctionnement d'une lampe à décharge en courant continu ou à une fréquence pouvant s'écarter de la fréquence d'alimentation.
Cette seconde édition annule et remplace la première édition parue en 2005 et l'Amendement 1:2010. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) ajout de références datées le cas échéant;
b) clarification des numéros d'entités d'échantillonnage;
c) ajout de nouvelles exigences relatives aux informations (marquages v), w) et x) indiqués dans l'IEC 61347-1:2015, 7.1 et l'IEC 61347-1:2015/AMD1:2017, 7.1).

Predstikalni pribor za sijalke - 2-12. del: Posebne zahteve - Elektronske predstikalne naprave za sijalke z enosmernim ali izmeničnim napajanjem (razen fluorescenčnih sijalk) (IEC 61347-2-12:2024)

General Information

Status
Published
Publication Date
29-Dec-2024
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Dec-2024
Due Date
22-Feb-2025
Completion Date
30-Dec-2024

Relations

Buy Standard

Standard
EN IEC 61347-2-12:2025
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2025
Predstikalni pribor za sijalke - 2-12. del: Posebne zahteve - Elektronske
predstikalne naprave za sijalke z enosmernim ali izmeničnim napajanjem (razen
fluorescenčnih sijalk) (IEC 61347-2-12:2024)
Controlgear for electric light sources - Safety - Part 2-12: Particular requirements - DC or
AC supplied electronic controlgear for discharge lamps (excluding fluorescent lamps)
(IEC 61347-2-12:2024)
Betriebsgeräte für elektrische Lichtquellen - Sicherheit - Teil 2-12: Besondere
Anforderungen - gleich- oder wechselstromversorgte elektronische Vorschaltgeräte für
Entladungslampen (ausgenommen Leuchtstofflampen) (IEC 61347-2-12:2024)
Appareillages de commande pour les sources de lumière électriques - Sécurité - Partie 2
-12: Exigences particulières - Appareillages électroniques alimentés en courant continu
ou alternatif pour lampes à décharge (à l'exclusion des lampes fluorescentes) (IEC
61347-2-12:2024)
Ta slovenski standard je istoveten z: EN IEC 61347-2-12:2024
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61347-2-12

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2024
ICS 29.140.99 Supersedes EN 61347-2-12:2005; EN 61347-2-
12:2005/corrigendum Dec. 2010; EN 61347-2-
12:2005/A1:2010
English Version
Controlgear for electric light sources - Safety - Part 2-12:
Particular requirements - DC or AC supplied electronic
controlgear for discharge lamps (excluding fluorescent lamps)
(IEC 61347-2-12:2024)
Appareillages de commande pour les sources de lumière Betriebsgeräte für elektrische Lichtquellen - Sicherheit - Teil
électriques - Sécurité - Partie 2-12: Exigences particulières 2-12: Besondere Anforderungen - gleich- oder
- Appareillages électroniques alimentés en courant continu wechselstromversorgte elektronische Vorschaltgeräte für
ou alternatif pour lampes à décharge (à l'exclusion des Entladungslampen (ausgenommen Leuchtstofflampen)
lampes fluorescentes) (IEC 61347-2-12:2024)
(IEC 61347-2-12:2024)
This European Standard was approved by CENELEC on 2024-10-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61347-2-12:2024 E

European foreword
The text of document 34C/1585/CDV, future edition 2 of IEC 61347-2-12, prepared by SC 34C
"Auxiliaries for lamps" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 61347-2-12:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-12-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-12-31
document have to be withdrawn
This document supersedes EN 61347-2-12:2005 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61347-2-12:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60188 NOTE Approved as EN 60188
IEC 60192 NOTE Approved as EN 60192
IEC 60662 NOTE Approved as EN 60662
IEC 61167 NOTE Approved as EN 61167
IEC 61347-2-12:2005 NOTE Approved as EN 61347-2-12:2005 (not modified)
IEC 61347-2-12:2005/A1:2010 NOTE Approved as EN 61347-2-12:2005/A1:2010 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60052 2002 Voltage measurement by means of standard air EN 60052 2002
gaps
IEC 60417 - Graphical symbols for use on equipment. Index, - -
survey and compilation of the single sheets.
IEC 61347-1 2015 Lamp controlgear - Part 1: General and safety EN 61347-1 2015
requirements
+ A1 2017 + A1 2021
IEC 61347-2-1 2024 Controlgear for electric light sources - Safety - EN IEC 61347-2-1 2024
Part 2-1: Particular requirements - Starting
devices (other than glow starters)

IEC 61347-2-12 ®
Edition 2.0 2024-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Controlgear for electric light sources – Safety –

Part 2-12: Particular requirements – DC or AC supplied electronic controlgear

for discharge lamps (excluding fluorescent lamps)

Appareillages de commande pour les sources de lumière électriques – Sécurité –

Partie 2-12: Exigences particulières – Appareillages électroniques alimentés en

courant continu ou alternatif pour lampes à décharge (à l'exclusion des lampes

fluorescentes)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99  ISBN 978-2-8322-8846-7

– 2 – IEC 61347-2-12:2024 © IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General requirements . 8
5 General notes on tests . 9
6 Classification . 9
7 Marking . 9
7.1 Marking and information . 9
7.1.1 Mandatory marking . 9
7.1.2 Information to be provided . 10
7.2 Durability and legibility . 10
7.3 Built-in controlgear . 10
8 Terminals . 10
9 Earthing . 10
10 Protection against accidental contact with live parts . 10
11 Moisture resistance and insulation . 10
12 Electric strength . 10
13 Thermal endurance test for windings . 10
14 Fault conditions . 10
15 Protection of associated components. 11
16 Ignition voltage . 11
16.1 Instruments . 11
16.2 Ignition voltage limits . 11
16.3 Ignition time cut-out . 11
17 Abnormal conditions . 12
18 Construction . 14
19 Creepage distances and clearances . 14
20 Screws, current-carrying parts and connections . 14
21 Resistance to heat, fire and tracking . 14
22 Resistance to corrosion . 14
23 Applicable annexes of IEC 61347-1 . 15
Annex A (informative) Precautions to be observed when measuring with sphere-gaps . 16
A.1 General . 16
A.2 Spherical spark gap . 16
A.3 Breakdown gap distance . 16
A.4 Duty cycle of the electronic controlgear . 16
A.5 End of test . 16
Annex B (informative) Schedule of more onerous requirements . 17
Bibliography . 18

Figure 1 – Circuit to test whether the controlgear can withstand a leaking burner . 12

IEC 61347-2-12:2024 © IEC 2024 – 3 –
Figure 2 – Circuit to test whether the controlgear can withstand rectification . 14

– 4 – IEC 61347-2-12:2024 © IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONTROLGEAR FOR ELECTRIC LIGHT SOURCES – SAFETY –

Part 2-12: Particular requirements – DC or AC supplied electronic
controlgear for discharge lamps (excluding fluorescent lamps)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publicati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.