SIST EN ISO 11073-20601:2017
(Main)Health informatics - Personal health device communication - Part 20601: Application profile - Optimized exchange protocol (ISO/IEEE 11073-20601:2016)
Health informatics - Personal health device communication - Part 20601: Application profile - Optimized exchange protocol (ISO/IEEE 11073-20601:2016)
Within the context of the ISO/IEEE 11073 personal health device standard family, this standard defines an
optimized exchange protocol and modeling techniques to be used by implementers of personal health
devices to create interoperability between device types and vendors. This standard establishes a common
framework for an abstract model of personal health data available in transport-independent transfer syntax
required to establish logical connections between systems and to provide presentation capabilities and
services needed to perform communication tasks. The protocol is optimized to personal health usage
requirements and leverages commonly used methods and tools wherever possible.
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit - Teil 20601: Anwendungsprofil - Optimiertes Datenübertragungsprotokoll (ISO/IEEE 11073-20601:2016)
Informatique de santé - Communication entre dispositifs de santé personnels - Partie 20601: Profil d'application - Protocole d'échange optimisé (ISO/IEEE 11073-20601:2016)
Dans le contexte de la famille de norme ISO/IEEE 11073 relative à la communication entre dispositifs, la présente norme définit un cadre commun pour mettre à disposition un modèle abstrait de données relatives à la santé personnelle dans une syntaxe de transfert indépendante du transport requise aux fins d'établir des connexions logiques entre systèmes et de fournir des capacités et des services de présentation nécessaires pour effectuer les tâches de communication. Le protocole est optimisé pour répondre aux exigences des utilisations relatives à la santé des personnes et s'appuie dans la mesure du possible sur des méthodes et des outils couramment utilisés.
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 20601. del: Profil aplikacije - Optimalni protokol izmenjave podatkov (ISO/IEEE 11073-20601:2016)
Ta standard v okviru skupine standardov za osebne medicinske naprave ISO/IEEE 11073 določa optimalni protokol izmenjave podatkov in tehnike modeliranja, ki jih izvajalci na področju osebnih medicinskih naprav uporabljajo za ustvarjanje interoperabilnosti med vrstami naprav in ponudniki. Ta standard določa skupni okvir za abstraktni model osebnih zdravstvenih podatkov, razpoložljivih v okviru prenosne sintakse, ki je neodvisna od oblike prenosa in potrebna za vzpostavljanje logičnih povezav med sistemi ter za zagotavljanje predstavitvenih zmožnosti in storitev, ključnih za izvajanje komunikacijskih opravil. Protokol je optimiziran glede na zahteve glede uporabe osebnih zdravstvenih podatkov ter poenostavlja običajno uporabljane metode in orodja, kjer je to mogoče.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11073-20601:2017
01-februar-2017
1DGRPHãþD
SIST EN ISO 11073-20601:2011
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 20601. del:
Profil aplikacije - Optimalni protokol izmenjave podatkov (ISO/IEEE 11073-
20601:2016)
Health informatics - Personal health device communication - Part 20601: Application
profile - Optimized exchange protocol (ISO/IEEE 11073-20601:2016)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 20601: Anwendungsprofil - Optimiertes Datenübertragungsprotokoll (ISO/IEEE
11073-20601:2016)
Informatique de santé - Communication entre dispositifs de santé personnels - Partie
20601: Profil d'application - Protocole d'échange optimisé (ISO/IEEE 11073-20601:2016)
Ta slovenski standard je istoveten z: EN ISO 11073-20601:2016
ICS:
11.040.99 Druga medicinska oprema Other medical equipment
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
SIST EN ISO 11073-20601:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11073-20601:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 11073-20601:2017
EN ISO 11073-20601
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2016
EUROPÄISCHE NORM
ICS 35.240.80 Supersedes EN ISO 11073-20601:2011
English Version
Health informatics - Personal health device
communication - Part 20601: Application profile -
Optimized exchange protocol (ISO/IEEE 11073-
20601:2016, including Cor 1:2016)
Informatique de santé - Communication entre Medizinische Informatik - Kommunikation von Geräten
dispositifs de santé personnels - Partie 20601: Profil für die persönliche Gesundheit - Teil 20601:
d'application - Protocole d'échange optimisé (ISO/IEEE Anwendungsprofil - Optimiertes
11073-20601:2016, y compris Cor 1:2016) Datenübertragungsprotokoll (ISO/IEEE 11073-
20601:2016, einschließlich Cor 1:2016)
This European Standard was approved by CEN on 21 February 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11073-20601:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11073-20601:2017
EN ISO 11073-20601:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11073-20601:2017
EN ISO 11073-20601:2016 (E)
European foreword
This document (EN ISO 11073-20601:2016 including Cor 1:2016) has been prepared by Technical
Committee ISO/TC 215 “Health informatics” in collaboration with Technical Committee CEN/TC 251
“Health informatics” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2017, and conflicting national standards
shall be withdrawn at the latest by February 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 11073-20601:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO/IEEE 11073-20601:2016 including Cor 1:2016 has been approved by CEN as
EN ISO 11073-20601:2016 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11073-20601:2017
---------------------- Page: 6 ----------------------
SIST EN ISO 11073-20601:2017
INTERNATIONAL ISO/IEEE
STANDARD 11073-20601
Second edition
2016-06-15
Health informatics — Personal health
device communication —
Part 20601:
Application profile — Optimized
exchange protocol
Informatique de santé — Communication entre dispositifs de santé
personnels —
Partie 20601: Profil d'application — Protocole d'échange optimisé
Reference number
ISO/IEEE 11073-20601:2016(E)
©
ISO 2016
©
IEEE 2014
---------------------- Page: 7 ----------------------
SIST EN ISO 11073-20601:2017
ISO/IEEE 11073-20601:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016
© IEEE 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO or IEEE at the respective
address below.
Institute of Electrical and Electronics Engineers, Inc.
ISO copyright office
3 Park Avenue, New York NY 10016-5997, USA
Case postale 401 • CH-1214 Vernier, Geneva
E-mail stds.ipr@ieee.org
Tel. + 41 22 749 01 11
Web www.ieee.org
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
© ISO 2016 – All rights reserved
ii © IEEE 2014 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11073-20601:2017
ISO/IEEE 11073-20601:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers
are not necessarily members of the Institute and serve without compensation. While the IEEE administers the
process and establishes rules to promote fairness in the consensus development process, the IEEE does not
independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject matter
covered by patent rights. By publication of this standard, no position is taken with respect to the existence or
validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential
patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or
scope of patents or patent claims or determining whether any licensing terms or conditions provided in
connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if
any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly
advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is
entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards
Association.
ISO/IEEE 11073-20601 was prepared by the IEEE 11073 Standards Comittee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073-20601-2014). It was adopted by Technical Committee
ISO/TC 215, Health informatics, in parallel with its approval by the ISO member bodies, under the “fast-track
procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO
and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO
member bodies.
© ISO 2016 – All rights reserved
© IEEE 2014 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 11073-20601:2017
ISO/IEEE 11073-20601:2016(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, this standard defines a common framework for making an abstract model of
personal health data available in transport-independent transfer syntax required to establish
logical connections between systems and to provide presentation capabilities and services
needed to perform communication tasks. The protocol is optimized to personal health usage
requirements and leverages commonly used methods and tools wherever possible.
•
Keywords: IEEE 11073-20601™, medical device communication, personal health devices
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2014 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 10 October 2014. Printed in the United States of America.
IEEE and IEEE 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
PDF: ISBN 978-0-7381-9314-4 STD98793
Print: ISBN 978-0-7381-9315-1 STDPD98793
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
© ISO 2016 – All rights reserved
© IEEE 2014 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 11073-20601:2017
ISO/IEEE 11073-20601:2016(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards
Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and participate without compensation from IEEE.
While IEEE administers the process and establishes rules to promote fairness in the consensus development
process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the
soundness of any judgments contained in its standards.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related
to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved
and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given
IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
© ISO 2016 – All rights reserved
© IEEE 2014 – All rights reserved
---------------------- Page: 11 ----------------------
SIST EN ISO 11073-20601:2017
ISO/IEEE 11073-20601:2016(E)
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied on as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission
to photocopy portions of any individual standard for educational classroom use can also be obtained
through the Copyright Clearance Center.
© ISO 2016 – All rights reserved
© IEEE 2014 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 11073-20601:2017
ISO/IEEE 11073-20601:2016(E)
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten
years old and has not undergone a revision process, it is reasonable to conclude that its contents, although
still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to
determine that they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at
http://ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more
information about the IEEE SA or IEEE’s standards development process, visit the IEEE-SA Website at
http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL:
http://standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata
periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE-SA Website at http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.
© ISO 2016 – All rights reserved
© IEEE 2014 – All rights reserved
---------------------- Page: 13 ----------------------
SIST EN ISO 11073-20601:2017
ISO/IEEE 11073-20601:2016(E)
Participants
At the time this standard was submitted to the IEEE-SA Standards Board for approval, the Personal Health
Devices Working Group had the following membership:
Daidi Zhong, Co-Chair
Michael J. Kirwan, Co-Chair
Douglas P. Bogia, Co-Chair
Charles R. Abbruscato Jinhan Chung Raul Gonzalez Gomez
Nabil Abujbara Malcolm Clarke Chris Gough
Maher Abuzaid John A. Cogan Channa Gowda
Manfred Aigner John T. Collins Charles M. Gropper
Jorge Alberola Cory Condek Amit Gupta
Karsten Alders Todd H. Cooper Jeff Guttmacher
Murtaza Ali David Cornejo Rasmus Haahr
Rolf Ambuehl Douglas Coup Christian Habermann
David Aparisi Nigel Cox Michael Hagerty
Lawrence Arne Hans Crommenacker Jerry Hahn
Diego B. Arquillo Tomio Crosley Robert Hall
Serafin Arroyo David Culp Nathaniel Hamming
Muhammad Asim Allen Curtis Rickey L. Hampton
Merat Bagha Ndifor Cyril Fru Sten Hanke
Doug Baird Jesús Daniel Trigo Jordan Hartmann
David Baker Eyal Dassau Kai Hassing
Anindya Bakshi David Davenport Marc Daniel Haunschild
Ananth Balasubramanian Russell Davis Wolfgang Heck
Sunlee Bang Ed Day Charles Henderson
M. Jonathan Barkley Sushil K. Deka Jun-Ho Her
Gilberto Barrón Pedro de-las-Heras-Quiros Takashi Hibino
David Bean Jim DelloStritto Timothy L. Hirou
John Bell Matthew d’Entremont Allen Hobbs
Rudy Belliardi Lane Desborough Alex Holland
Kathryn M. Bennett Kent Dicks Arto Holopainen
Daniel Bernstein Hyoungho Do Robert Hoy
George A. Bertos Xiaolian Duan Frank Hsu
Chris Biernacki Anne Huang
Brian Dubreuil
Ola Björsne Jakob Ehrensvard Sen-Der Huang
Thomas Blackadar Fredrik Einberg Zhiqiang Huang
Marc Blanchet
Roger M. Ellingson Ron Huby
Thomas Bluethner Michihiro Enokida Robert D. Hughes
Xavier Boniface Javier Escayola Calvo David Hughes
Leonardo Estevez
Shannon Boucousis Jiyoung Huh
Julius Broma Roger Feeley Hugh Hunter
Lyle G. Bullock Bosco T. Fernandes Hitoshi Ikeda
Bernard Burg Christoph Fischer Yutaka Ikeda
Chris Burns Morten Flintrup Philip O. Isaacson
Anthony Butt Joseph W. Forler Atsushi Ito
Jeremy Byford-Rew Russell Foster Michael Jaffe
Satya Calloji Eric Freudenthal Praduman Jain
Carole C. Carey Matthias Frohner Danny Jochelson
Santiago Carot-Nemesio Ken Fuchs Chris Johnson
Randy W. Carroll Jing Gao Phaneeth Junga
Simon Carter Marcus Garbe Akiyoshi Kabe
Seungchul Chae John Garguilo Steve Kahle
Rahul Chauhan Rick Geimer Tomio Kamioka
James Cheng Igor Gejdos Kei Kariya
Peggy Chien Ferenc Gerbovics Andy Kaschl
Chia-Chin Chong Nicolae Goga Junzo Kashihara
Saeed A. Choudhary Julian Goldman Kohichi Kashiwagi
vi
Copyright © 2014 IEEE. All rights reserved.
© ISO 2016 – All rights reserved
© IEEE 2014 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 11073-20601:2017
ISO/IEEE 11073-20601:2016(E)
Ralph Kent Jim Niswander Sternly K. Simon
Laurie M. Kermes Hiroaki Niwamoto Marjorie Skubic
Ikuo Keshi Thomas Norgall Robert Smith
Junhyung Kim Anand Noubade Ivan Soh
Min-Joon Kim Yoshiteru Nozoe Motoki Sone
Minho Kim Abraham Ofek Emily Sopensky
Taekon Kim Brett Olive Rajagopalan Srinivasan
Tetsuya Kimura Begonya Otal Andreas Staubert
Alfred Kloos Charles Palmer Nicholas Steblay
Jeongmee Koh Bud Panjwani Beth Stephen
Jean-Marc Koller Carl Pantiskas Lars Steubesand
John Koon Harry P. Pappas John (Ivo) Stivoric
Patty Krantz Mikey Paradis Raymond A. Strickland
Alexander Kraus Hanna Park Hermanni Suominen
Ramesh Krishna Lee Surprenant
Jong-Tae Park
Geoffrey Kruse Myungeun Park Ravi Swami
Falko Kuester Soojun Park Ray Sweidan
Rafael Lajara
Phillip E. Pash Jin Tan
Pierre Landau TongBi Pei Haruyuyki Tatsumi
Jaechul Lee Soren Petersen John W. Thomas
JongMuk Lee
James Petisce Brad Tipler
Kyong Ho Lee Peter Piction Jonas Tirén
Rami Lee Michael Pliskin James Tomcik
Sungkee Lee Jeff Price Janet Traub
Woojae Lee Harald Prinzhorn Gary Tschautscher
Yonghee Lee John Quinlan Masato Tsuchid
Joe Lenart Arif Rahman Ken Tubman
Kathryn A. Lesh Tanzilur Rahman Yoshihiro Uchida
Qiong Li Steve Ray Sunil Unadkat
Ying Li Phillip Raymond Fabio Urbani
Patrick Lichter Tim Reilly Philipp Urbauer
Jisoon Lim Barry Reinhold Laura Vanzago
Joon-Ho Lim Brian Reinhold Alpo Värri
John Lin Melvin I. Reynolds Ciro de la Vega
Jiajia Liu John G. Rhoads Dalimar Velez
Wei-Jung Lo Jeffrey S. Robbins Naveen Verma
Charles Lowe Moskowitz Robert Rudi Voon
Don Ludolph Timothy Robertson Isobel Walker
Christian Luszick David Rosales David Wang
Bob MacWilliams Bill Saltzstein Jerry P. Wang
Srikkanth Madhurbootheswaran Benedikt Salzbrunn Yao Wang
Romain Marmot Giovanna Sannino Yi Wang
Sandra Martinez Jose A. Santos-Cadenas Steve Warren
Miguel Martínez de Espronceda Stefan Sauermann Fujio Watanabe
Cámara John Sawyer Toru Watsuji
Peter Mayhew Guillaume Schatz Mike Weng
Jim McCain Alois Schloegl Kathleen Wible
László Meleg Paul S. Schluter Paul Williamson
Alexander Mense Lars Schmitt Jan Wittenber
Ethan Metsger Mark G. Schnell Jia-Rong Wu
Yu Miao Richard A. Schrenker Will Wykeham
Jinsei Miyazaki Antonio Scorpiniti Ariton Xhafa
Erik Moll Kwang Seok Seo Junjie Yang
Darr Moore Riccardo Serafin Ricky Yang
Piotr Murawski Sid Shaw Melanie Yeung
Soundharya Nagasubramanian Frank Shen Done-Sik Yoo
Jae-Wook Nah Liqun Shen Jason Zhang
Alex Neefus Bozhi Shi Zhiqiang Zhang
Trong-Nghia Nguyen-Dobinsky Min Shih
Thomas Zhao
Michael E. Nidd Mazen Shihabi Miha Zoubek
Tetsu Nishimura Redmond Shouldice Szymon Zysko
vii
Copyright © 2014 IEEE. All rights reserved.
© ISO 2016 – All rights reserved
© IEEE 2014 – All rights reserved
---------------------- Page: 15 ----------------------
SIST EN ISO 11073-20601:2017
ISO/IEEE 11073-20601:2016(E)
The following members of the balloting committee voted on this standard. Balloters may have voted for
approval, disapproval, or abstention.
Hector Barron Gonzalez David Friscia Charles Ngethe
Pieter Botman David Fuschi Melvin I. Reynolds
Lyle G. Bullock Randall Groves Terence Rout
Juan Carreon Kai Hassing Bartien Sayogo
Randy W. Carroll Werner Hoelzl Lars Schmitt
Lawrence Catchpole Ruimin Hu Carl Singer
Jianwen Chen Noriyuki Ikeuchi Kapil Sood
Keith Chow Akio Iso Raymond A. Strickland
Donald Cragun Atsushi Ito Walter Struppler
Paul Croll Raj Jain Jiande Sun
Russell Davis Junghoon Jee Hung-Yu Wei
Douglas Dorr Piotr Karocki Jan Wittenber
Sourav Dutta Stuart Kerry Oren Yuen
Christoph Fischer Geoff Ladwig Daidi Zhong
Richard Lancaster
When the IEEE-SA Standards Board approved this standard on 21 August 2014, it had the following
membership:
John Kulick, Chair
Jon Walter Rosdahl, Vice-chair
Richard H. Hulett, Past Chair
Konstantinos Karachalios, Secretary
Peter Balma Michael Janezic Ron Peterson
Farooq Bari Jeffrey Katz Adrian Stephens
Ted Burse Joseph L. Koepfinger* Peter Sutherland
Clint Chaplain David Law Yatin Trivedi
Stephen Dukes Hung Ling Phil Winston
Jean-Phillippe Faure Oleg Logvinov Don Wright
Gary Hoffman T. W. Olsen Yu Yuan
Glenn Parsons
*Member Emeritus
Also included are the following nonvoting IE
...
SLOVENSKI STANDARD
kSIST FprEN ISO 11073-20601:2015
01-december-2015
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 20601. del:
Profil aplikacije - Optimalni protokol izmenjave podatkov (ISO/IEEE FDIS 11073-
20601)
Health informatics - Personal health device communication - Part 20601: Application
profile - Optimized exchange protocol (ISO/IEEE FDIS 11073-20601)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 20601: Anwendungsprofil - Optimiertes Datenübertragungsprotokoll (ISO/IEEE FDIS
11073-20601)
Informatique de santé - Communication entre dispositifs de santé personnels - Partie
20601: Profil d'application - Protocole d'échange optimisé (ISO/IEEE FDIS 11073-20601)
Ta slovenski standard je istoveten z: FprEN ISO 11073-20601
ICS:
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
kSIST FprEN ISO 11073-20601:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST FprEN ISO 11073-20601:2015
---------------------- Page: 2 ----------------------
kSIST FprEN ISO 11073-20601:2015
FINAL
INTERNATIONAL ISO/IEEE
DRAFT
STANDARD FDIS
11073-20601
ISO/TC 215
Health informatics — Personal health
Secretariat: ANSI
device communication —
ISO voting begins on:
2015-08-20
Part 20601:
Application profile — Optimized
ISO voting terminates on:
2016-01-20
exchange protocol
Informatique de santé — Communication entre dispositifs de santé
personnels —
Partie 20601: Profil d'application — Protocole d'échange optimisé
Please see the administrative notes on page ii-1
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORT-
ING DOCUMENTATION.
Reference number
IN ADDITION TO THEIR EVALUATION AS
ISO/IEEE FDIS 11073-20601:2015(E)
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
©
IEEE 2014
---------------------- Page: 3 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. Neither the ISO Central
Secretariat nor IEEE accepts any liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies
and IEEE members. In the unlikely event that a problem relating to it is found, please inform the ISO Central Secretariat or IEEE at the
address given below.
Copyright notice
This ISO/IEEE document is a Final Draft International Standard and is copyright-protected by IEEE. Except
as permitted under the applicable laws of the user’s country, neither this ISO/IEEE draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester. In the United States, such requests should be sent to IEEE.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc.
Case postale 56 CH-1211 Geneva 20 3 Park Avenue, New York NY 10016-5997, USA
Tel. + 41 22 749 01 11 E-mail stds.ipr@ieee.org
Fax + 41 22 749 09 47 Web www.ieee.org
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © IEEE 2011 – All rights reserved
---------------------- Page: 4 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
FAST-TRACK PROCEDURE
This document is submitted under the fast-track procedure in accordance with the Partner
Standards Development Organization cooperation agreement between ISO and IEEE, as approved
by Council Resolution 2/2011, and is submitted to all ISO member bodies for voting within
5 months.
Positive votes shall not be accompanied by comments.
Negative votes shall be accompanied by the relevant technical reasons.
In accordance with the provisions of Council Resolution 15/1993, this document is circulated in the
English language only.
© IEEE 2014 – All rights reserved ii-1
---------------------- Page: 5 ----------------------
kSIST FprEN ISO 11073-20601:2015
---------------------- Page: 6 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers
are not necessarily members of the Institute and serve without compensation. While the IEEE administers the
process and establishes rules to promote fairness in the consensus development process, the IEEE does not
independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject matter
covered by patent rights. By publication of this standard, no position is taken with respect to the existence or
validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential
patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or
scope of patents or patent claims or determining whether any licensing terms or conditions provided in
connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if
any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly
advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is
entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards
Association.
ISO/IEEE 11073-20601 was prepared by the IEEE 11073 Standards Comittee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073-20601-2014). It was adopted by Technical Committee
ISO/TC 215, Health informatics, in parallel with its approval by the ISO member bodies, under the “fast-track
procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO
and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO
member bodies.
© IEEE 2014 – All rights reserved iii
---------------------- Page: 7 ----------------------
kSIST FprEN ISO 11073-20601:2015
---------------------- Page: 8 ----------------------
kSIST FprEN ISO 11073-20601:2015
Health informatics—Personal health device communication
Part 20601: Application profile—
Optimized Exchange Protocol
IEEE Engineering in Medicine and Biology Society
Sponsored by the
IEEE 11073™ Standards Committee
IEEE
IEEE Std 11073-20601™-2014
3 Park Avenue
(Revision of
New York, NY 10016-5997
ISO/IEEE 11073-20601:2010)
USA
---------------------- Page: 9 ----------------------
kSIST FprEN ISO 11073-20601:2015
---------------------- Page: 10 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
IEEE Std 11073-20601™-2014
(Revision of
ISO/IEEE 11073-20601:2010)
Health informatics—Personal health device communication
Part 20601: Application profile—
Optimized Exchange Protocol
Sponsor
IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 21 August 2014
IEEE-SA Standards Board
© IEEE 2014 – All rights reserved
---------------------- Page: 11 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, this standard defines a common framework for making an abstract model of
personal health data available in transport-independent transfer syntax required to establish
logical connections between systems and to provide presentation capabilities and services
needed to perform communication tasks. The protocol is optimized to personal health usage
requirements and leverages commonly used methods and tools wherever possible.
•
Keywords: IEEE 11073-20601™, medical device communication, personal health devices
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2014 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 10 October 2014. Printed in the United States of America.
IEEE and IEEE 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
PDF: ISBN 978-0-7381-9314-4 STD98793
Print: ISBN 978-0-7381-9315-1 STDPD98793
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
© IEEE 2014 – All rights reserved
---------------------- Page: 12 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards
Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and participate without compensation from IEEE.
While IEEE administers the process and establishes rules to promote fairness in the consensus development
process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the
soundness of any judgments contained in its standards.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related
to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved
and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given
IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
© IEEE 2014 – All rights reserved
---------------------- Page: 13 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied on as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission
to photocopy portions of any individual standard for educational classroom use can also be obtained
through the Copyright Clearance Center.
© IEEE 2014 – All rights reserved
---------------------- Page: 14 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten
years old and has not undergone a revision process, it is reasonable to conclude that its contents, although
still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to
determine that they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at
http://ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more
information about the IEEE SA or IEEE’s standards development process, visit the IEEE-SA Website at
http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL:
http://standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata
periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE-SA Website at http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.
© IEEE 2014 – All rights reserved
---------------------- Page: 15 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
Participants
At the time this standard was submitted to the IEEE-SA Standards Board for approval, the Personal Health
Devices Working Group had the following membership:
Daidi Zhong, Co-Chair
Michael J. Kirwan, Co-Chair
Douglas P. Bogia, Co-Chair
Charles R. Abbruscato Jinhan Chung Raul Gonzalez Gomez
Nabil Abujbara Malcolm Clarke Chris Gough
Maher Abuzaid John A. Cogan Channa Gowda
Manfred Aigner John T. Collins Charles M. Gropper
Jorge Alberola Cory Condek Amit Gupta
Karsten Alders Todd H. Cooper Jeff Guttmacher
Murtaza Ali David Cornejo Rasmus Haahr
Rolf Ambuehl Douglas Coup Christian Habermann
David Aparisi Nigel Cox Michael Hagerty
Lawrence Arne Hans Crommenacker Jerry Hahn
Diego B. Arquillo Tomio Crosley Robert Hall
Serafin Arroyo David Culp Nathaniel Hamming
Muhammad Asim Allen Curtis Rickey L. Hampton
Merat Bagha Ndifor Cyril Fru Sten Hanke
Doug Baird Jesús Daniel Trigo Jordan Hartmann
David Baker Eyal Dassau Kai Hassing
Anindya Bakshi David Davenport Marc Daniel Haunschild
Ananth Balasubramanian Russell Davis Wolfgang Heck
Sunlee Bang Ed Day Charles Henderson
M. Jonathan Barkley Sushil K. Deka Jun-Ho Her
Gilberto Barrón Pedro de-las-Heras-Quiros Takashi Hibino
David Bean Jim DelloStritto Timothy L. Hirou
John Bell Matthew d’Entremont Allen Hobbs
Rudy Belliardi Lane Desborough Alex Holland
Kathryn M. Bennett Kent Dicks Arto Holopainen
Daniel Bernstein Hyoungho Do Robert Hoy
George A. Bertos Xiaolian Duan Frank Hsu
Chris Biernacki Anne Huang
Brian Dubreuil
Ola Björsne Jakob Ehrensvard Sen-Der Huang
Thomas Blackadar Fredrik Einberg Zhiqiang Huang
Marc Blanchet
Roger M. Ellingson Ron Huby
Thomas Bluethner Michihiro Enokida Robert D. Hughes
Xavier Boniface Javier Escayola Calvo David Hughes
Leonardo Estevez
Shannon Boucousis Jiyoung Huh
Julius Broma Roger Feeley Hugh Hunter
Lyle G. Bullock Bosco T. Fernandes Hitoshi Ikeda
Bernard Burg Christoph Fischer Yutaka Ikeda
Chris Burns Morten Flintrup Philip O. Isaacson
Anthony Butt Joseph W. Forler Atsushi Ito
Jeremy Byford-Rew Russell Foster Michael Jaffe
Satya Calloji Eric Freudenthal Praduman Jain
Carole C. Carey Matthias Frohner Danny Jochelson
Santiago Carot-Nemesio Ken Fuchs Chris Johnson
Randy W. Carroll Jing Gao Phaneeth Junga
Simon Carter Marcus Garbe Akiyoshi Kabe
Seungchul Chae John Garguilo Steve Kahle
Rahul Chauhan Rick Geimer Tomio Kamioka
James Cheng Igor Gejdos Kei Kariya
Peggy Chien Ferenc Gerbovics Andy Kaschl
Chia-Chin Chong Nicolae Goga Junzo Kashihara
Saeed A. Choudhary Julian Goldman Kohichi Kashiwagi
vi
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved
---------------------- Page: 16 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
Ralph Kent Jim Niswander Sternly K. Simon
Laurie M. Kermes Hiroaki Niwamoto Marjorie Skubic
Ikuo Keshi Thomas Norgall Robert Smith
Junhyung Kim Anand Noubade Ivan Soh
Min-Joon Kim Yoshiteru Nozoe Motoki Sone
Minho Kim Abraham Ofek Emily Sopensky
Taekon Kim Brett Olive Rajagopalan Srinivasan
Tetsuya Kimura Begonya Otal Andreas Staubert
Alfred Kloos Charles Palmer Nicholas Steblay
Jeongmee Koh Bud Panjwani Beth Stephen
Jean-Marc Koller Carl Pantiskas Lars Steubesand
John Koon Harry P. Pappas John (Ivo) Stivoric
Patty Krantz Mikey Paradis Raymond A. Strickland
Alexander Kraus Hanna Park Hermanni Suominen
Ramesh Krishna Lee Surprenant
Jong-Tae Park
Geoffrey Kruse Myungeun Park Ravi Swami
Falko Kuester Soojun Park Ray Sweidan
Rafael Lajara
Phillip E. Pash Jin Tan
Pierre Landau TongBi Pei Haruyuyki Tatsumi
Jaechul Lee Soren Petersen John W. Thomas
JongMuk Lee
James Petisce Brad Tipler
Kyong Ho Lee Peter Piction Jonas Tirén
Rami Lee Michael Pliskin James Tomcik
Sungkee Lee Jeff Price Janet Traub
Woojae Lee Harald Prinzhorn Gary Tschautscher
Yonghee Lee John Quinlan Masato Tsuchid
Joe Lenart Arif Rahman Ken Tubman
Kathryn A. Lesh Tanzilur Rahman Yoshihiro Uchida
Qiong Li Steve Ray Sunil Unadkat
Ying Li Phillip Raymond Fabio Urbani
Patrick Lichter Tim Reilly Philipp Urbauer
Jisoon Lim Barry Reinhold Laura Vanzago
Joon-Ho Lim Brian Reinhold Alpo Värri
John Lin Melvin I. Reynolds Ciro de la Vega
Jiajia Liu John G. Rhoads Dalimar Velez
Wei-Jung Lo Jeffrey S. Robbins Naveen Verma
Charles Lowe Moskowitz Robert Rudi Voon
Don Ludolph Timothy Robertson Isobel Walker
Christian Luszick David Rosales David Wang
Bob MacWilliams Bill Saltzstein Jerry P. Wang
Srikkanth Madhurbootheswaran Benedikt Salzbrunn Yao Wang
Romain Marmot Giovanna Sannino Yi Wang
Sandra Martinez Jose A. Santos-Cadenas Steve Warren
Miguel Martínez de Espronceda Stefan Sauermann Fujio Watanabe
Cámara John Sawyer Toru Watsuji
Peter Mayhew Guillaume Schatz Mike Weng
Jim McCain Alois Schloegl Kathleen Wible
László Meleg Paul S. Schluter Paul Williamson
Alexander Mense Lars Schmitt Jan Wittenber
Ethan Metsger Mark G. Schnell Jia-Rong Wu
Yu Miao Richard A. Schrenker Will Wykeham
Jinsei Miyazaki Antonio Scorpiniti Ariton Xhafa
Erik Moll Kwang Seok Seo Junjie Yang
Darr Moore Riccardo Serafin Ricky Yang
Piotr Murawski Sid Shaw Melanie Yeung
Soundharya Nagasubramanian Frank Shen Done-Sik Yoo
Jae-Wook Nah Liqun Shen Jason Zhang
Alex Neefus Bozhi Shi Zhiqiang Zhang
Trong-Nghia Nguyen-Dobinsky Min Shih
Thomas Zhao
Michael E. Nidd Mazen Shihabi Miha Zoubek
Tetsu Nishimura Redmond Shouldice Szymon Zysko
vii
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved
---------------------- Page: 17 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
The following members of the balloting committee voted on this standard. Balloters may have voted for
approval, disapproval, or abstention.
Hector Barron Gonzalez David Friscia Charles Ngethe
Pieter Botman David Fuschi Melvin I. Reynolds
Lyle G. Bullock Randall Groves Terence Rout
Juan Carreon Kai Hassing Bartien Sayogo
Randy W. Carroll Werner Hoelzl Lars Schmitt
Lawrence Catchpole Ruimin Hu Carl Singer
Jianwen Chen Noriyuki Ikeuchi Kapil Sood
Keith Chow Akio Iso Raymond A. Strickland
Donald Cragun Atsushi Ito Walter Struppler
Paul Croll Raj Jain Jiande Sun
Russell Davis Junghoon Jee Hung-Yu Wei
Douglas Dorr Piotr Karocki Jan Wittenber
Sourav Dutta Stuart Kerry Oren Yuen
Christoph Fischer Geoff Ladwig Daidi Zhong
Richard Lancaster
When the IEEE-SA Standards Board approved this standard on 21 August 2014, it had the following
membership:
John Kulick, Chair
Jon Walter Rosdahl, Vice-chair
Richard H. Hulett, Past Chair
Konstantinos Karachalios, Secretary
Peter Balma Michael Janezic Ron Peterson
Farooq Bari Jeffrey Katz Adrian Stephens
Ted Burse Joseph L. Koepfinger* Peter Sutherland
Clint Chaplain David Law Yatin Trivedi
Stephen Dukes Hung Ling Phil Winston
Jean-Phillippe Faure Oleg Logvinov Don Wright
Gary Hoffman T. W. Olsen Yu Yuan
Glenn Parsons
*Member Emeritus
Also included are the following nonvoting IEEE-SA Standards Board liaisons:
Richard DeBlasio, DOE Representative
Michael Janezic, NIST Representative
Don Messina
IEEE-SA Content Publishing
Kathryn Bennett
IEEE-SA Technical Community Programs
viii
Copyright © 2014 IEEE. All rights reserved.
© IEEE 2014 – All rights reserved
---------------------- Page: 18 ----------------------
kSIST FprEN ISO 11073-20601:2015
ISO/IEEE 11073-20601:2015(E)
Introduction
This introduction is not part of IEEE Std 11073-20601-2014, Health informatics—Personal health device
communication—Part 20601: Application profile—Optimized Exchange Protocol.
ISO and IEEE 11073 standards enable communication between medical devices and external computer
systems. This standard and corresponding IEEE 11073-104zz standards address a need
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.