SIST EN 12629-5-4:2004/kFprA1:2010

Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-4: Maschinen zum Beschichten von Betonrohren

Machines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-4: Machines de revêtement des tuyaux en béton

Stroji za izdelavo gradbenih proizvodov iz betona in apnenega peščenca - Varnost - 5-4. del: Stroji za nanašanje premazov na betonske cevi

General Information

• Status: Not Published
• Public Enquiry End Date: 04-May-2010
• ICS: 91.220 - Construction equipment
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 08-Oct-2019
• Due Date: 13-Oct-2019
• Completion Date: 08-Oct-2019
• Directive: Harmonized Standard2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive:

  ---

  Not Harmonized98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 12629-5-4:2003/FprA1 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines

Relations

• Consolidated By: SIST EN 12629-5-4:2004+A1:2010 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines
• Effective Date: 10-Jul-2010
• Amends: SIST EN 12629-5-4:2004 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines
• Effective Date: 01-Apr-2010

Overview

SIST EN 12629-5-4:2004/kFprA1:2010 is a Slovenian standard specifying the safety requirements for machines used in the manufacture of constructional products from concrete and calcium-silicate, focusing particularly on concrete pipe coating machines. Developed under the European Committee for Standardization (CEN), this document harmonizes with key European directives and serves as an essential reference for manufacturers, users, and regulators in the construction equipment sector. The standard is part of a broader series addressing safety for various types of machinery used in concrete and calcium-silicate product manufacturing.

Compliance with SIST EN 12629-5-4:2004/kFprA1:2010 supports manufacturers and operators in meeting essential safety requirements, aligning with EU Machinery Directive 2006/42/EC and the earlier 98/37/EC directive.

Key Topics

• Scope and Application: Covers only concrete pipe coating machines, detailing specific safety measures and requirements in addition to the general provisions found in EN 12629-1.
• Significant Hazards: Identifies and addresses significant hazards associated with the operation and maintenance of concrete pipe coating machines, as well as foreseeable misuse.
• Design Principles: Requires machines to be designed according to the safety principles outlined in EN ISO 12100.
• Verification and Marking: Prescribes processes for verifying compliance with safety and protective measures, as well as mandatory marking protocols consistent with the broader EN 12629 series.
• Relationship to EU Directives: Details how the requirements align with the essential requirements of the EU Machinery Directives (98/37/EC and 2006/42/EC), providing a “presumption of conformity” when followed.

Applications

This standard is directly applicable to:

• Manufacturers: Entities designing, producing, or distributing concrete pipe coating machines for the construction sector. The standard supports conformity assessment and streamlines the path to CE marking under EU directives.
• Construction and Precast Concrete Producers: Companies operating concrete pipe coating machines will benefit from enhanced operational safety, reduced downtime, and increased compliance with occupational safety and health regulations.
• Safety and Compliance Inspectors: Regulators and auditors use this standard as a benchmark when evaluating the safety of construction equipment in both manufacturing and industrial environments.
• Design Engineers: Provides important risk assessment guidelines and integrates a structured approach to minimizing machine-based hazards from the earliest stages of equipment design.

Related Standards

SIST EN 12629-5-4:2004/kFprA1:2010 is part of a comprehensive series that addresses safety for machines in constructional product manufacturing. Related and referenced standards include:

• EN 12629-1:2000+A1: General safety requirements for machines producing concrete and calcium-silicate products.
• EN ISO 12100: Basic principles for risk assessment and design methodology for machinery safety.
• EN 1050: Principles for risk assessment in the context of machinery safety.
• EN ISO 13850, EN ISO 13857, EN 60204-1: Provide further technical details for specific protective measures and electrical safety requirements.

This standard is integral for industry stakeholders seeking to ensure a high level of safety in concrete pipe coating machines, supporting best practices in safe machine design, operation, and maintenance, and facilitating international and European market access. For full compliance, consult the related parts of the EN 12629 series and referenced machinery safety documentation.

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2010
6WURML]DL]GHODYRJUDGEHQLKSURL]YRGRYL]EHWRQDLQDSQHQHJDSHãþHQFD9DUQRVW
GHO6WURML]DQDQDãDQMHSUHPD]RYQDEHWRQVNHFHYL
Machines for the manufacture of constructional products from concrete and calcium-
silicate - Safety - Part 5-4: Concrete pipe coating machines
Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen -
Sicherheit - Teil 5-4: Maschinen zum Beschichten von Betonrohren
Machines pour la fabrication de produits de construction en béton et silico-calcaire -
Sécurité - Partie 5-4: Machines de revêtement des tuyaux en béton
Ta slovenski standard je istoveten z: EN 12629-5-4:2003/FprA1
ICS:
91.220 Gradbena oprema Construction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 12629-5-4:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
February 2010
ICS 91.220
English Version
Machines for the manufacture of constructional products from
concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe
coating machines
Machines pour la fabrication de produits de construction en Maschinen für die Herstellung von Bauprodukten aus Beton
béton et silico-calcaire - Sécurité - Partie 5-4: Machines de und Kalksandsteinmassen - Sicherheit - Teil 5-4:
revêtement des tuyaux en béton Maschinen zum Beschichten von Betonrohren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 12629-5-4:2003. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12629-5-4:2003/FprA1:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Modifications to the Foreword .4
2 Modifications to the Introduction .5
3 Modifications to Clause 1 (Scope) .5
4 Modifications to Clause 2 (Normative references) .6
5 Modification to Clause 3 (Terms and definitions) .6
6 Modification to Clause 4 (List of significant hazards) .6
7 Modifications to Clause 5 (Safety requirements and/or measures) .6
8 Modifications to Clause 6 (Verification of safety requirements and/or measures) .7
9 Modifications to Clause 7 (Information for use) .7
10 Modifications to Clause 8 (Marking) .7
11 Modifications to Annex B (Hazard zones) .8
12 Modification to Annex ZA, Relationship between this European Standard and the
Essential Requirements of EU Directive 98/37/EC .8
13 Addition of a new Annex ZB, Relationship between this European Standard and the
Essential Requirements of EU Directive 2006/42/EC .9
14 Deletion of the Bibliography .9

Foreword
This document (EN 12629-5-4:2003/FprA1:2010) has been prepared by Technical Committee CEN/TC 151
“Construction equipment and building material machines - Safety”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
1 Modifications to the Foreword
th
Replace the 4 paragraph with the following:
"For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document."
th
Replace the 5 paragraph with the following:
"The series "Machines for the manufacture of constructional products from concrete and calcium – silicate –
Safety" consists of following parts:
Part 1: Common requirements
Part 2: Block making machines
Part 3: Slide and turntable machines
Part 4: Concrete rooftile making machines
Part 5.1: Concrete pipe machines manufacturing in the vertical axis.
Part 5.2: Concrete pipe machines manufacturing in the horizontal axis
Part 5.3: Pipe prestressing machines
Part 5.4: Concrete pipe coating machines
Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products
Part 7: Stationary and mobile equipment for the benched manufacture of prestressed products
Part 8: Machines and equipment for the manufacture of constructional products from calcium silicate (and
concrete)."
Delete the last but one paragraph.
2 Modifications to the Introduction
Replace the existing text with the following:
"This European Standard is a Type C-standard as stated in EN ISO 12100.
The machinery concerned and the extent to which hazards, hazardous situation and events are covered are
indicated in the scope of this document.
When provisions of this type C document are different from those, which are stated in type A or B documents,
the provisions of this type C document take precedence over the provisions of the other documents, for
machines that have been design
...