SIST EN 12094-16:2003

Fixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO2 low pressure systems

This European Standard specifies requirements and describes test methods for odorizing devices for CO2 low pressure systems which release an odorizing substance into the extinguishant during discharge. This European Standard is applicable to odorizing devices for CO2 low pressure systems, which are not pressurized before discharge. This European Standard should only be used as guidance for testing odorizing devices which work on different principles or odorizing devices for other systems.

Ortsfeste Brandbekämpfungsanlagen - Bauteile für Löschanlagen mit gasförmigen Löschmitteln - Teil 16: Anforderungen und Prüfverfahren für Odoriergeräte für CO2-Niederdruckanlagen

Diese Europäische Norm legt Anforderungen und Prüfverfahren für Odoriergeräte für CO2-Niederdruckanlagen fest, die während der Flutung einen Odorierstoff in das Löschgas freigeben.
Diese Europäische Norm gilt für Odoriergeräte für CO2-Niederdruckanlagen, die vor der Flutung nicht mit Druck beaufschlagt sind.

Installations fixes de lutte contre l'incendie - Eléments constitutifs pour installations d'extinction a gaz - Partie 16: Exigences et méthodes d'essai pour dispositifs odorisants pour installations a CO2 basse pression

La présente Norme européenne spécifie les exigences et décrit les méthodes d'essai applicables aux dispositifs odorisants pour systemes a CO2 basse pression qui liberent une substance odorisante dans l'agent extincteur durant la décharge.
La présente Norme européenne est applicable aux dispositifs odorisants pour systemes a CO2 basse pression, qui ne sont pas pressurisés avant la décharge.

Vgrajeni gasilni sistemi - Sestavni deli sistemov za gašenje s plinom -16. del: Zahteve in preskusne metode za naprave za zagotavljanje vonja za nizkotlačne sisteme s CO2

General Information

• Status: Published
• Publication Date: 30-Apr-2003
• ICS: 13.220.10 - Fire-fighting
• Technical Committee: POZ - Požarna varnost
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2003
• Due Date: 01-May-2003
• Completion Date: 01-May-2003
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 12094-16:2003 - Fixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO2 low pressure systems

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QL]NRWODþQHOrtsfeste Brandbekämpfungsanlagen - Bauteile für Löschanlagen mit gasförmigen Löschmitteln - Teil 16: Anforderungen und Prüfverfahren für Odoriergeräte für CO2-NiederdruckanlagenInstallations fixes de lutte contre l'incendie - Eléments constitutifs pour installations d'extinction a gaz - Partie 16: Exigences et méthodes d'essai pour dispositifs odorisants pour installations a CO2 basse pressionFixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO2 low pressure systems13.220.10Gašenje požaraFire-fightingICS:Ta slovenski standard je istoveten z:EN 12094-16:2003SIST EN 12094-16:2003en01-maj-2003SIST EN 12094-16:2003SLOVENSKI
STANDARD



SIST EN 12094-16:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12094-16March 2003ICS 13.220.20English versionFixed firefighting systems - Components for gas extinguishingsystems - Part 16: Requirements and test methods for odorizingdevices for CO2 low pressure systemsInstallations fixes de lutte contre l'incendie - Elémentsconstitutifs pour installations d'extinction à gaz - Partie 16:Exigences et méthodes d'essai pour dispositifs odorisantspour installations à CO2 basse pressionOrtsfeste Brandbekämpfungsanlagen - Bauteile fürLöschanlagen mit gasförmigen Löschmitteln - Teil 16:Anforderungen und Prüfverfahren für Odoriergeräte fürCO2-NiederdruckanlagenThis European Standard was approved by CEN on 21 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12094-16:2003 ESIST EN 12094-16:2003



EN 12094-16:2003 (E)2ContentspageForeword.3Introduction.51Scope.62Normative References.63Terms and definitions.64Requirements.64.1General design.64.2Connection threads.74.3Resistance to internal pressure and leakage.74.4Function.74.5Documentation.75Test methods.75.1Test conditions.75.2Test samples and order of tests.75.3Compliance.85.4Internal pressure and leakage test.85.5Function test.86Marking.8Bibliography.9SIST EN 12094-16:2003



EN 12094-16:2003 (E)3ForewordThis document (EN 12094-16:2003) has been prepared by Technical Committee CEN/TC 191 "Fixed firefightingsystems", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at thelatest by September 2003.This part of EN 12094 is one of a number of European Standards prepared by CEN/TC 191 covering components forgas extinguishing systems.They are included in a series of European Standards planned to cover:- gas extinguishing systems (EN 12094)- sprinkler systems (EN 12259:1999+A1 and EN 12845)- powder systems (EN 12416)- explosion protection systems (EN 26184)- foam systems (EN 13565)- hose systems (EN 671)- smoke and heat control systems (EN 12101)- water spray systems1)This European Standard has the general title "Fixed firefighting systems – Components for gas extinguishingsystems" and will consist of the following parts:- Part 1: Requirements and test methods for electrical automatic control and delay devices- Part 2: Requirements and test methods for non-electrical automatic control and delay devices- Part 3: Requirements and test methods for manual triggering and stop devices- Part 4: Requirements and test methods for high pressure container valve assemblies and their actuators- Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2systems- Part 6: Requirements and test methods for non-electrical disable devices for CO2 systems- Part 7: Requirements and test methods for nozzles for CO2 systems- Part 8: Requirements and test methods for flexible connectors for CO2 systems- Part 9: Requirements and test methods for special fire detectors
1)Under preparation.SIST EN 12094-16:2003



EN 12094-16:2003 (E)4- Part 10: Requirements and test
...