iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 15780:2024

(Main)

Ventilation for buildings - Ductwork - Cleanliness of ventilation systems

Ventilation for buildings - Ductwork - Cleanliness of ventilation systems

This document specifies general requirements and gives guidelines for ventilation systems except for industrial, medical and laboratory facilities.
This document also specifies cleanliness criteria and procedures necessary in assessing and maintaining the cleanliness of ventilation systems over their lifetime from design and installation to maintenance.
This document applies to both new and existing ventilation systems with, and without, air conditioning and kitchen extract systems.

Lüftung von Gebäuden - Luftleitungen - Sauberkeit von Lüftungsanlagen

Dieses Dokument legt allgemeine Anforderungen fest und enthält Richtlinien für Lüftungsanlagen, außer für Industrie-, Medizin- und Laboreinrichtungen.
Dieses Dokument legt außerdem Kriterien für die Sauberkeit und Verfahren fest, die zur Bewertung und Instandhaltung der Sauberkeit von Lüftungsanlagen über ihre Lebensdauer hinweg, von der Auslegung über die Installation bis zur Wartung, notwendig sind.
Dieses Dokument gilt für neue und bestehende Lüftungsanlagen mit und ohne Klimatisierung und Küchenabluftanlagen.

Ventilation des bâtiments - Réseaux de conduits - Propreté des systèmes de ventilation

Le présent document spécifie les exigences générales et donne les modes opératoires pour les systèmes de ventilation à l’exclusion des installations industrielles, médicales et de laboratoire.
Le présent document spécifie également les critères de propreté et les modes opératoires nécessaires à l'évaluation et au maintien de la propreté des systèmes de ventilation tout au long de leur durée de vie, depuis la conception et l'installation jusqu'à l'entretien.
Le présent document s’applique aux systèmes de ventilation neufs et existants avec, et sans, conditionnement d'air et systèmes d’extraction de cuisine.

Prezračevanje stavb - Kanali - Čistoča prezračevalnih sistemov

General Information

Status
Not Published
Public Enquiry End Date
30-Apr-2024
ICS
91.060.40 - Chimneys, shafts, ducts
91.140.30 - Ventilation and air-conditioning systems
Technical Committee
OGS - Heating for buildings
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
09-Feb-2024
Due Date
28-Jun-2024
Ref Project
prEN 15780 - Ventilation for buildings - Ductwork - Cleanliness of ventilation systems

Relations

Revises
SIST EN 15780:2012 - Ventilation for buildings - Ductwork - Cleanliness of ventilation systems
Effective Date
21-Jun-2023

Buy Standard

prEN 15780:2024prEN 15780:2024
PreviousNext
Draft
prEN 15780:2024
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 15780:2024
01-april-2024
Prezračevanje stavb - Kanali - Čistoča prezračevalnih sistemov
Ventilation for buildings - Ductwork - Cleanliness of ventilation systems
Lüftung von Gebäuden - Luftleitungen - Sauberkeit von Lüftungsanlagen
Ventilation des bâtiments - Réseaux de conduits - Propreté des systèmes de ventilation
Ta slovenski standard je istoveten z: prEN 15780
ICS:
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
91.140.30 Prezračevalni in klimatski Ventilation and air-
sistemi conditioning systems
oSIST prEN 15780:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15780:2024

---------------------- Page: 2 ----------------------
oSIST prEN 15780:2024


DRAFT
EUROPEAN STANDARD
prEN 15780
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2024
ICS 91.140.30 Will supersede EN 15780:2011
English Version

Ventilation for buildings - Ductwork - Cleanliness of
ventilation systems
Ventilation des bâtiments - Réseaux de conduits - Lüftung von Gebäuden - Luftleitungen - Sauberkeit von
Propreté des systèmes de ventilation Lüftungsanlagen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 156.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15780:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15780:2024
prEN 15780:2024 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and units . 7
5 Criteria for cleanliness and assessment . 8
5.1 General considerations . 8
5.2 Assessment of the need for cleaning . 8
5.3 Design and handing over information . 8
5.4 Determination of cleaning interval . 9
5.5 Assessment of the cleanliness level after cleaning . 9
6 Methodology .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15780:2012(Main)
Ventilation for buildings - Ductwork - Cleanliness of ventilation systems
EN 15780:2011

This European Standard applies to both new and existing ventilation and air conditioning systems and specifies the assessment criteria of cleanliness, cleaning procedures of these systems, and the validation of the effectiveness of cleaning applies also to products, which conform to EN 1505, EN 1506, EN 13053, EN 13180 and EN 13403, used in air conditioning and ventilation systems for human occupancy defined in the scope of CEN/TC 156. This European Standard does not apply to installations for industrial processes. Cleanliness of ventilation systems is considered important for human comfort and health, energy consumption, system service life and for cleanliness of operations or processes carried out in the ventilated area. Considerations for change of component as an alternative for cleaning (e.g. in case of flexible ducts and air filters) are also included. This European Standard specifies general requirements and procedures necessary in assessing and maintaining the cleanliness of ducted ventilation, including:
- cleanliness quality classification;
- how to assess the need for cleaning (visual, measurements);
- assessment frequency (general guidance); guidance of system inspections in accordance with EN 15239, and EN 15240 when relevant;
- selection of cleaning method – to be in line with handing over documentation according to EN 12599;
- how to assess the result of cleaning.
This European Standard is a parallel standard to EN 12097, which specifies requirements for dimension, shape and location for access panels for cleaning and service in ductwork systems. This European Standard is made as an umbrella standard with informative annexes that can be revised, completed and further added in future revisions of this European Standard for specific system types, and products or applications in the system, such as:
- Air Handling Units (AHU);
- filter;
- humidifiers;
- heat recovery units;
- decentralised air treatment units such as fan-coil units, indu

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 15780:2021(Main)
Ventilation for buildings - Ductwork - Cleanliness of ventilation systems
prEN 15780

This European Standard applies to both new and existing ventilation and air conditioning systems and specifies the assessment criteria of cleanliness, cleaning procedures of these systems, and the validation of the effectiveness of cleaning applies also to products, which conform to EN 1505, EN 1506, EN 13053, EN 13180 and EN 13403, used in air conditioning and ventilation systems for human occupancy defined in the scope of CEN/TC 156. This European Standard does not apply to installations for industrial processes.
Cleanliness of ventilation systems is considered important for human comfort and health, energy consumption, system service life and for cleanliness of operations or processes carried out in the ventilated area.
Considerations for change of component as an alternative for cleaning (e.g. in case of flexible ducts and air filters) are also included.
This European Standard specifies general requirements and procedures necessary in assessing and maintaining the cleanliness of ducted ventilation, including:
-   cleanliness quality classification;
-   how to assess the need for cleaning (visual, measurements);
-   assessment frequency (general guidance); guidance of system inspections in accordance with EN 15239, and EN 15240 when relevant;
-   selection of cleaning method – to be in line with handing over documentation according to
EN 12599;
-   how to assess the result of cleaning.
This European Standard is a parallel standard to EN 12097, which specifies requirements for dimension, shape and location for access panels for cleaning and service in ductwork systems.
This European Standard is made as an umbrella standard with informative annexes that can be revised, completed and further added in future revisions of this European Standard for specific system types, and products or applications in the system, such as:
-   Air Handling Units (AHU);
-   filter;
-   humidifiers;
-   heat recovery units;
-   decentralised air treatment units such as fan-coil units, indu

  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-10:2022(Main)
Fire resistance tests for service installations - Part 10: Smoke control dampers
EN 1366-10:2022

This document specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions.
It is of note that the smoke control damper to be tested could require testing to EN 1366 2 and that this is for consideration before carrying out these tests.
Smoke control damper tests are used to confirm that the furnace testing requirements of EN 12101 8 are met and EN 12101 8 is for consideration before carrying out these tests.
Smoke control dampers tested to this document are expected to be classified using EN 13501 4 and this document is expected to be considered before carrying out these tests.
To this end, this document is expected to be read in conjunction with EN 12101 8, EN 13501 4, EN 1366 2 and EN 1363 1, the latter giving further details for fire resistance testing.
For installation details, the requirements for smoke extraction ducts are for consideration and these are defined in EN 1366 8 and EN 1366 9.

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-1:2014+A1:2020(Main)
Fire resistance tests for service installations - Part 1: Ventilation ducts
EN 1366-1:2014+A1:2020

This Part of EN 1366 specifies a method for determining the fire resistance of vertical and horizontal ventilation ducts including those access panels, which are integral part of the tested ducts. The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). This Standard is used in conjunction with EN1363-1.
Annex A provides general guidance and gives background information.
This European Standard is not applicable to:
a)   ducts whose fire resistance depends on the fire resistance performance of a ceiling or wall(where ducts are located in cavities enclosed by fire-resistant shafts or ceilings);
b)   ducts containing fire dampers at points where they pass through fire separations;
c)   one, two or three sided ducts;
d)   fixing of suspension devices (e.g. anchors) to floors or walls.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15780:2012(Main)
Ventilation for buildings - Ductwork - Cleanliness of ventilation systems
EN 15780:2011

This European Standard applies to both new and existing ventilation and air conditioning systems and specifies the assessment criteria of cleanliness, cleaning procedures of these systems, and the validation of the effectiveness of cleaning applies also to products, which conform to EN 1505, EN 1506, EN 13053, EN 13180 and EN 13403, used in air conditioning and ventilation systems for human occupancy defined in the scope of CEN/TC 156. This European Standard does not apply to installations for industrial processes. Cleanliness of ventilation systems is considered important for human comfort and health, energy consumption, system service life and for cleanliness of operations or processes carried out in the ventilated area. Considerations for change of component as an alternative for cleaning (e.g. in case of flexible ducts and air filters) are also included. This European Standard specifies general requirements and procedures necessary in assessing and maintaining the cleanliness of ducted ventilation, including:
- cleanliness quality classification;
- how to assess the need for cleaning (visual, measurements);
- assessment frequency (general guidance); guidance of system inspections in accordance with EN 15239, and EN 15240 when relevant;
- selection of cleaning method – to be in line with handing over documentation according to EN 12599;
- how to assess the result of cleaning.
This European Standard is a parallel standard to EN 12097, which specifies requirements for dimension, shape and location for access panels for cleaning and service in ductwork systems. This European Standard is made as an umbrella standard with informative annexes that can be revised, completed and further added in future revisions of this European Standard for specific system types, and products or applications in the system, such as:
- Air Handling Units (AHU);
- filter;
- humidifiers;
- heat recovery units;
- decentralised air treatment units such as fan-coil units, indu

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1366-9:2023(Main)
Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts
FprEN 1366-9

This part of EN 1366 specifies a test method for determining the fire resistance of smoke extraction ducts that are used for single compartment applications only. In such applications, the smoke extraction system is only intended to function up to flashover (typically 600 °C).
This method of test is only suitable for ducts constructed from non-combustible materials (euro class A1 and A2-s1, d0).
It is applicable only to four sided and circular ducts. One-, two- and three-sided ducts are not covered. This standard is applicable only for the standard sizes or smaller as described.
This test method of part 9 is applicable only to smoke extraction ducts that do not pass into other fire compartments. For smoke extraction ducts that pass into other compartments, the method of test described in EN 1366-8 is used.
The smoke extraction duct is part of the smoke extraction system which also includes smoke control dampers and smoke extract fans.

  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1366-15:2024(Main)
Fire resistance tests for service installations - Part 15: 1-, 2-, 3- sided ducts
prEN 1366-15

This Part of EN 1366 specifies a method for determining the fire resistance of horizontal 1-, 2- or 3-sided ventilation ducts and ducts whose fire resistance depends on the fire resistance performance of a ceiling or wall (where ducts are located in cavities enclosed by fire-resistant shafts or ceilings). The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). This Standard is used in conjunction with EN1363-1.
This test method does not take into consideration the effect of spalling or deflection of the adjoining floor/wall.
This test method is only applicable to ventilation ducts that have passed the test for the appropriate time period according to EN1366-1 (Duct A and B) in vertical and horizontal orientations.
The test specimens should not incorporate access panels, these are tested in accordance with EN1366-1.

  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 15780:2021(Main)
Ventilation for buildings - Ductwork - Cleanliness of ventilation systems
prEN 15780

This European Standard applies to both new and existing ventilation and air conditioning systems and specifies the assessment criteria of cleanliness, cleaning procedures of these systems, and the validation of the effectiveness of cleaning applies also to products, which conform to EN 1505, EN 1506, EN 13053, EN 13180 and EN 13403, used in air conditioning and ventilation systems for human occupancy defined in the scope of CEN/TC 156. This European Standard does not apply to installations for industrial processes.
Cleanliness of ventilation systems is considered important for human comfort and health, energy consumption, system service life and for cleanliness of operations or processes carried out in the ventilated area.
Considerations for change of component as an alternative for cleaning (e.g. in case of flexible ducts and air filters) are also included.
This European Standard specifies general requirements and procedures necessary in assessing and maintaining the cleanliness of ducted ventilation, including:
-   cleanliness quality classification;
-   how to assess the need for cleaning (visual, measurements);
-   assessment frequency (general guidance); guidance of system inspections in accordance with EN 15239, and EN 15240 when relevant;
-   selection of cleaning method – to be in line with handing over documentation according to
EN 12599;
-   how to assess the result of cleaning.
This European Standard is a parallel standard to EN 12097, which specifies requirements for dimension, shape and location for access panels for cleaning and service in ductwork systems.
This European Standard is made as an umbrella standard with informative annexes that can be revised, completed and further added in future revisions of this European Standard for specific system types, and products or applications in the system, such as:
-   Air Handling Units (AHU);
-   filter;
-   humidifiers;
-   heat recovery units;
-   decentralised air treatment units such as fan-coil units, indu

  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-10:2022/oprA1:2023(Amendment)
Fire resistance tests for service installations - Part 10: Smoke control dampers
EN 1366-10:2022/FprA1

This document specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions, as well as at ambient temperatures.
Smoke control damper tests are used to confirm that the furnace testing requirements of EN 12101-8 are met and EN 12101-8 is for consideration before carrying out these tests.
Smoke control dampers tested to this document are expected to be classified using EN 13501-4 and this document is expected to be considered before carrying out these tests.
NOTE   Some smoke control dampers to be tested might require testing following the information given in EN 1366-2 and this needs consideration before carrying out testing.
This document is expected to be read in conjunction with EN 12101-8, EN 13501-4, EN 1366-2 and EN 1363-1, the latter giving further details for fire resistance testing.
For installation details, the requirements for smoke extraction ducts are for consideration and these are defined in EN 1366-8 and EN 1366-9.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45545-3:2024(Main)
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
EN 45545-3:2024

This part of EN 45545 specifies the fire resistance requirements and testing methods for fire barriers for railway vehicles.
The objective of the measures and requirements, specified in this part of EN 45545, is to protect passengers and staff in railway vehicles in the event of a developing fire on board.
Use of a Fire Containment and Control System, where permitted as an alternative to a fire barrier, is not in the scope of this part of EN 45545. It is not within the scope of this part of EN 45545 to describe measures that ensure the preservation of the railway vehicles in the event of a fire.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day